Differential LVPECL Clock Oscillator CCPD-940 Model 9×14 mm SMD, 3.3V, LVPECL Frequency Range: 151.000 MHz to 212.500 MHz Stability vs. Temperature (ppm): Temperature Range: (Option X) ±20, ±25, ±50, ±100 0°C to 70°C -40°C to 85°C Storage: -45°C to 90°C Input Voltage: Input Current: 3.3V ±0.3V 88mA Max Output: Symmetry: Rise/Fall Time: Load: Terminated to Vdd-2V Logic "1" Level: Logic "0" Level: Disable Time: Start-up time: Differential LVPECL 49/51% Typical, 45/55% Max @ zero crossing point 550ps Max (20% to 80%) into 50 ohms Vcc-0.96V Min, Vcc-0.81V Max Vcc-1.85V Min, Vcc-1.65V Max 100ns Max 2ms Typical, 10ms Max Sub-Harmonics: none Period Jitter: Phase Jitter: <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max (20,000 periods) 12kHz~20MHz 50kHz~80MHz Phase Noise Max: Aging: EK 0 T YS -94 z CR CPD 2 MH C 5.5 15 C CRYSTEK CORPORATION 100Hz 1kHz 10kHz 100kHz -80 dBc/Hz -108 dBc/Hz -132 dBc/Hz -140 dBc/Hz <3ppm 1st year, <1ppm every year thereafter Applications: 10 Gigabit Ethernet OC48: Forward Error Correction Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & High Q crystal technology to provide a Low Noise, Low Jitter Voltage Controlled Crystal Oscillator solution at a competitive price. Specifications subject to change without notice. TD-040901 Rev. K Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com Differential LVPECL Clock Oscillator CCPD-940 Model 9×14 mm SMD, 3.3V, LVPECL Crystek Part Number Guide 0.560 (14.2) CRYSTEK P/N Frequency Date Code 0.360 (9.14) CCPD-940 X - 25 - 155.520 #1 #2 #3 #4 0.100 (2.54) 0.040 (1.01) 1 2 6 5 3 0.070 (1.77) 4 #5 0.200 (5.08) #1 Crystek 9×14 SMD PECL #2 Model 940 = High Frequency 3.3V #3 Temp. Range: Blank = 0/70°C, X=-40/85°C #4 Stability = 20ppm, 25ppm, 50ppm, Blank=100ppm #4 Frequency in MHz: 3 or 6 decimal places 0.560 (14.2) Example: CCPD-940X-25-155.520 = 3.3V,-40/85°C,25ppm,155.520 MHz SUGGESTED PAD LAYOUT via to ground 0.01µF 0.210 (5.3) 0.050 (1.27) Standard Frequencies MHz 151.0000 155.5200 156.2500 161.1328 166.6286 167.3317 200.0000 212.5000 0.280 (7.11) 0.090 (2.28) 0.200 (5.08) RECOMMENDED REFLOW SOLDERING PROFILE 900034 (See App Note listed on website) http://www.crystek.com/specification/reflow/900034.pdf PIN Function 1 2 3 4 5 6 NC E/D GND OUT COUT Vdd Enable/Disable Function Function pin 2 Output pin Open "0" level Vcc-1.620V Max "1" level Vcc-1.025V Min Disabled State: Pin 4 will assume a fixed level of logic "0" Pin 5 will assume a fixed level of logic "1" Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea, 500ea 24mm Tape Specifications subject to change without notice. C CRYSTEK CORPORATION Active Active Disabled TD-040901 Rev. K Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com