High Frequency SineWave VCXO CVSS-940 Model 9×14 mm SMD, 3.3V, SineWave Frequency Range: 77.760 MHz to 500 MHz Temperature Range: (Option X) 0°C to 70°C -40°C to 85°C Storage: -40°C to 100°C Input Voltage: Control Voltage: Settability At Nominal: Input Current: 3.3V ± 0.3V 1.65V ± 1.65V 1.65V ± 0.25V 30mA Max Output: Pullability APR: Linearity: Output Power: Start-up time: Load: True SineWave ±50ppm Min ±10% Max 0 dBm Min 2ms Typical, 10ms Max 50 Ω 2nd Harmonic: Sub-harmonics: (77MHz~170MHz) (171MHz~500MHz) -20 dBc Max Modulation BW: Period Jitter: (20,000 periods) Phase Jitter: 12kHz~20MHz 50kHz~80MHz >10kHz @ -3dB <5ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max <1ps RMS (1-sigma) Max Phase Noise Typical: 10Hz (@311.04MHz) 100Hz 1kHz 10kHz 100kHz -50 dBc/Hz -80 dBc/Hz -110 dBc/Hz -135 dBc/Hz -145 dBc/Hz Aging: <3ppm 1st year, <2ppm every year thereafter None -40 dBc Typical, -35 dBc Max Applications: 10 Gigabit Ethernet OC48: Forward Error Correction Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & HFF crystal technology to provide a Low Noise, Low Jitter Voltage Controlled Crystal Oscillator with True SineWave Output. Specifications subject to change without notice. C CRYSTEK CORPORATION TD-041205 Rev. J Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com High Frequency SineWave VCXO CVSS-940 Model 9×14 mm SMD, 3.3V, SineWave 0.560 (14.2) Crystek Part Number Guide CVSS-940 X-155.520 #1 #2 #3 0.360 (9.14) #4 CRYSTEK Part Number Frequency Date Code 0.040 (1.01) 1 2 4 3 #1 Crystek 9×14 SMD SineWave VCXO #2 Model 940 = High Frequency 3.3V #3 Temp. Range: Blank = 0/70°C, X = -40/85°C #4 Frequency in MHz: 3 or 6 decimal places 0.070 (1.77) 0.200 (5.08) 0.560 (14.2) Example: CVSS-940X-155.520 = 3.3V, -40/85°C, 155.520 MHz SUGGESTED PAD LAYOUT 0.210 (5.3) Standard Frequencies MHz 77.7600 155.5200 156.2500 161.1328 166.6286 0.050 (1.27) 0.090 (2.28) 167.3317 212.5000 250.0000 311.0400 Pad Connection 1 2 3 4 Volt Cont. GND OUT Vdd RECOMMENDED REFLOW SOLDERING PROFILE 900034 (See App Note listed on website) http://www.crystek.com/specification/reflow/900034.pdf Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea, 500ea 24mm Tape Specification subject to change without notice. C CRYSTEK CORPORATION 0.280 (7.11) 0.200 (5.08) TD-041205 Rev. J Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com