SERIES SPD62 FERRITE CORE & SLEEVE 1.2 100 0.08 2.4 100 0.10 3.5 100 0.12 4.7 100 0.15 6.8 100 0.17 10 100 0.18 12 100 0.20 15 1.0 0.30 18 1.0 0.35 22 1.0 0.40 27 1.0 0.45 33 1.0 0.50 39 1.0 0.70 47 1.0 0.75 56 1.0 0.85 68 1.0 1.20 82 1.0 1.45 100 1.0 1.60 120 1.0 1.70 150 1.0 1.80 180 1.0 2.10 220 1.0 2.20 270 1.0 3.00 330 1.0 3.30 s or ct du In ) Hz (k NG TI ) RA S T MP EN (A RR AL CU PIC TY CE AN ) ST S SI HM RE M (O DC MU XI MA Y NC UE EQ FR 0% ±2 R* -122M -242M -352M -472M -682M -103M -123M -153M -183M -223M -273M -333M -393M -473M -563M -683M -823M -104M -124M -154M -184M -224M -274M -334M er w Po ST TE H) (µ E MB NU Shielded Surface Mount Inductors CE AN CT DU IN SPD62R SH DA SERIES 3.50 2.80 2.50 2.00 1.80 1.40 1.30 1.20 1.10 1.00 0.94 0.82 0.78 0.70 0.68 0.56 0.50 0.41 0.39 0.37 0.35 0.32 0.29 0.22 Actual Size *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com Physical Parameters Inches A 0.244 ± 0.012 B 0.260 ± .012 C 0.118 Max. D 0.181 Ref. only E 0.059 ± 0.007 F 0.050 ± 0.007 G 0.015 Ref. only Millimeters 6.2 ± 0.3 6.6 ± 0.3 3.0 Max. 4.60 Ref. only 1.5 ± 0.2 1.27 ± 0.2 0.38 Ref. only Mechanical Configuration Units designed for surface mounting; ferrite core and ferrite sleeve Marking For values lower than 10 μH the R indicates a decimal point and the remaining digits indicate the inductance in μH. For values 10 μH and above, the first two digits indicate the inductance in μH and the third digit indicates the number of trailing zeros where a zero indicates that there are no trailing zeros. Example: SPD62R-122M (1.2 μH) 1R2 Example: SPD62R-334M (330 μH) 331 Operating temperature range –55°C to +125°C Application Frequency Range Values 1.2µH to 12µH to 1.0 MHz Min. Values above 12µH to 300 kHz Min. Current Rating at 25°C Ambient The maximum DC current that will cause a 40°C maximum temperature rise and where the inductance will not decrease by more than 10% from its zero DC value Packaging Tape & reel (16mm): 13" reel, 1500 pieces max.; 7" reel not available Note: No vias and traces in restricted area. 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 6/2014