API_newlayouts_single:APIcatalog_newlayouts 12/1/11 6:47 PM Page 91 Example: SPD73R-122M (1.2 H) 1R2 Example: SPD74R-105M (1,000 H) 102 Packaging Tape & reel (16mm): 13" reel, 1000 pieces max.; 7" reel not available s or ct du In Marking For values lower than 10 H the R indicates a decimal point and the remaining digits indicate the inductance in H. For values 10 H and above, the first two digits indicate the inductance in H and the third digit indicates the number of trailing zeros where a zero indicates that there are no trailing zeros. SERIES SPD73 FERRITE CORE & SLEEVE 1.2 100 0.020 2.4 100 0.032 3.5 100 0.035 4.7 100 0.050 6.8 100 0.065 10 100 0.067 12 1.0 0.080 15 1.0 0.091 18 1.0 0.14 22 1.0 0.19 27 1.0 0.21 33 1.0 0.24 39 1.0 0.32 47 1.0 0.36 56 1.0 0.47 68 1.0 0.52 82 1.0 0.69 100 1.0 0.79 120 1.0 0.84 150 1.0 0.89 180 1.0 1.45 220 1.0 1.65 270 1.0 2.31 330 1.0 2.62 390 1.0 2.94 470 1.0 4.18 560 1.0 4.67 680 1.0 5.73 820 1.0 6.54 1000 1.0 9.44 SERIES SPD74 FERRITE CORE & SLEEVE 1.2 100 0.025 2.4 100 0.03 3.5 100 0.034 4.7 100 0.038 6.8 100 0.042 10 100 0.049 12 1.0 0.058 15 1.0 0.081 18 1.0 0.091 22 1.0 0.11 27 1.0 0.15 33 1.0 0.17 39 1.0 0.23 47 1.0 0.26 56 1.0 0.35 68 1.0 0.38 82 1.0 0.43 100 1.0 0.61 120 1.0 0.66 150 1.0 0.88 180 1.0 0.98 220 1.0 1.17 270 1.0 1.64 330 1.0 1.86 390 1.0 2.85 470 1.0 3.01 560 1.0 3.62 680 1.0 4.63 820 1.0 5.2 1000 1.0 6.0 er w Po Current Rating at 25°C Ambient The maximum DC current that will cause a 40°C maximum temperature rise and where the inductance will not decrease by more than 10% from its zero DC value NG TI ) RA S T MP EN (A RR AL CU PIC TY CE AN ) ST S SI HM RE M (O DC MU XI MA Application Frequency Range Values 1.2µH to 10µH to 1.0 MHz Min. Values above 10µH to 300 kHz Min. -122M -242M -352M -472M -682M -103M -123M -153M -183M -223M -273M -333M -393M -473M -563M -683M -823M -104M -124M -154M -184M -224M -274M -334M -394M -474M -564M -684M -824M -105M ) Hz (k Operating temperature range –55°C to +125°C -122M -242M -352M -472M -682M -103M -123M -153M -183M -223M -273M -333M -393M -473M -563M -683M -823M -104M -124M -154M -184M -224M -274M -334M -394M -474M -564M -684M -824M -105M Y NC UE EQ FR Mechanical Configuration Units designed for surface mounting; ferrite core and ferrite sleeve ST TE Millimeters 7.3 ± 0.5 7.3 ± 0.5 4.7 Max. (Series SPD74) 3.9 Max.(Series SPD73) 5.0 ± 0.5 2.2 ± 0.5 1.0 ± 0.5 0.38 Ref. only 0% ±2 H) (µ Physical Parameters Inches A 0.287 ± .020 B 0.287 ± .020 C 0.185 Max. C 0.153 Max. D 0.200 ± 0.020 E 0.088 ± 0.020 F 0.042 ± 0.020 G 0.015 Ref. only R* Actual Size E MB NU Shielded Surface Mount Inductors CE AN CT DU IN SPD73R & SPD74R SPD73 & SPD74 SH DA SERIES 3.40 2.69 2.60 2.15 1.90 1.90 1.70 1.59 1.28 1.10 1.05 0.981 0.850 0.801 0.701 0.667 0.579 0.541 0.524 0.510 0.399 0.374 0.316 0.297 0.280 0.235 0.222 0.201 0.188 0.156 4.40 4.00 3.70 3.50 3.40 2.50 2.40 2.30 2.15 2.00 1.70 1.50 1.35 1.30 1.10 1.05 1.00 0.86 0.84 0.70 0.68 0.60 0.53 0.50 0.40 0.39 0.36 0.32 0.30 0.28 *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 12/2011