API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:17 PM Page 100 s or ct du In er ow Millimeters 35.56 to 37.60 29.21 Reference 19.05 Minimum 27.03 Maximum 5.08 Reference P ER ET e) AM nc DI fere AD e R LE es, ch L (In TA EN C) EM A D CR T ( IN EN RR CU NG TI ) RA C T AD EN M ( RR U CU XIM MA CE AN C ST 5° SI 2 RE S) @ DC M H (O M H) (µ MU XI CE kHz AN 0 MA CT 1.0 DU @ IN 0% ±1 * ER Physical Parameters Inches A 1.400 to 1.480 B 1.150 Reference C 0.750 Minimum D 1.064 Maximum F 0.200 Reference G See Table MB Actual Size NU High Current Power Line Chokes SH DC1390R DC1390 DA SERIES -153K -183K -223K -273K -333K -393K -473K -563K -683K -823K -104K -124K -154K -184K -224K -274K -334K -394K -474K -564K -684K -824K -105K -125K -155K -185K -225K -275K -335K -395K SERIES DC1390 and DC1390R 15.0 0.006 19.9 18.0 0.008 17.3 22.0 0.009 16.3 27.0 0.010 15.4 33.0 0.011 14.7 39.0 0.012 14.1 47.0 0.018 11.5 56.0 0.019 11.2 68.0 0.021 10.7 82.0 0.023 10.2 100 0.025 9.76 120 0.028 9.23 150 0.040 7.72 180 0.045 7.28 220 0.050 6.90 270 0.056 6.52 330 0.074 5.67 390 0.082 5.39 470 0.114 4.57 560 0.125 4.37 680 0.139 4.14 820 0.154 3.93 1000 0.216 3.32 1200 0.232 3.21 1500 0.324 2.71 1800 0.360 2.57 2200 0.494 2.20 2700 0.555 2.07 3300 0.773 1.76 3900 0.845 1.68 33.3 30.4 28.0 25.9 22.6 21.2 20.0 17.5 16.3 14.9 13.2 12.3 10.8 9.86 9.09 8.05 7.37 6.80 6.20 5.69 5.11 4.70 4.24 3.87 3.45 3.14 2.86 2.58 2.33 2.14 0.081 0.081 0.081 0.081 0.081 0.081 0.072 0.072 0.064 0.064 0.064 0.064 0.057 0.057 0.057 0.057 0.051 0.051 0.046 0.046 0.046 0.046 0.041 0.041 0.036 0.036 0.032 0.032 0.029 0.029 *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com Operating Temperature Range -55°C to +125°C; (-55°C to +80°C @ full current) Current Rating at 80° Ambient 45°C Temperature Rise Maximum Power Dissipation at +80°C 3.30 Watts Maximum Inductance Measured @ 1 kHz with 0 ADC on Wayne Kerr 3245A, or equivalent Leads Solder coated to within 1/16" of Body Incremental Current The amount of DC that decreases the inductance by 5% maximum, relative to the 0 ADC Dielectric Withstanding Voltage 1000 Vrms Minimum Mechanical Configuration Center hole allows for mounting Marking API, 1390 or 1390R, dash number (per table) and inductance tolerance letter API 1390 xxxK Packaging Bulk only 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 5/2010