NU M BE O M R* IN IN D AL U C TA N C TO E LE (µ H R ) A N C D E C R (O ES H IS M T S) AN @ C C 25 E M U R °C A M RE X. A N XI T M R U AT M I IN (A NG C R D C EM C U ) R EN R EN TA T L D (A IM D EN C (In S ) ch IO N es ,R B LE ef A er en (In D D ce I ch A ) es ME , R TE ef R er en ce ) High Current Power Line Chokes N DC1390R DC1390 DA SH Series SERIES DC1390 FERRITE CORE -153K 15.0 ±10% -183K 18.0 -223K 22.0 -273K -333K F G 0.189 to 0.191 See Characteristics Table Millimeters 34.0 to 36.0 19.05 Min. 23.5 to 26.5 4.80 to 4.86 4.80 to 4.86 Leads Tinned to within 1/16" of Body 19.9 33.3 1.12 0.082 ±10% 0.008 17.3 30.4 1.20 0.082 ±10% 0.009 16.3 28.0 1.20 0.082 27.0 ±10% 0.010 15.4 25.9 1.20 0.082 33.0 ±10% 0.011 14.7 22.6 1.20 0.082 -393K 39.0 ±10% 0.012 14.1 21.2 1.20 0.082 -473K 47.0 ±10% 0.018 11.5 20.0 1.20 0.073 -563K 56.0 ±10% 0.019 11.2 27.9 1.17 0.073 -683K 68.0 ±10% 0.021 10.7 16.3 1.17 0.065 10.2 -823K Physical Parameters Inches A 1.338 to 1.418 B See Characteristics Table C 0.750 Min. D 0.925 to 1.043 E 0.189 to 0.191 0.006 ±10% 0.023 14.9 1.22 0.065 -104K 100 82.0 ±10% 0.025 9.76 13.2 1.22 0.065 -124K 120 ±10% 0.028 9.23 12.3 1.22 0.065 -154K 150 ±10% 0.040 7.72 10.8 1.22 0.058 -184K 180 ±10% 0.045 7.28 9.86 1.19 0.058 -224K 220 ±10% 0.050 6.90 9.09 1.19 0.058 -274K 270 ±10% 0.056 6.52 8.05 1.25 0.058 -334K 330 ±10% 0.074 5.67 7.37 1.25 0.051 -394K 390 ±10% 0.082 5.39 6.80 1.22 0.051 -474K 470 ±10% 0.114 4.57 6.20 1.22 0.046 -564K 560 ±10% 0.125 4.37 5.69 1.24 0.046 -684K 680 ±10% 0.139 4.14 5.11 1.24 0.046 -824K 820 ±10% 0.154 3.93 4.70 1.24 0.046 Inductance Measured @ 1 kHz within 0 A DC on a GenRad 1658A Digibridge, or equivalent -105K 1000 ±10% 0.216 3.32 4.24 1.24 0.041 -125K 1200 ±10% 0.232 3.21 3.87 1.25 0.041 Mechanical Configuration Center hole allows for mechanical mounting; insulated bobbins -155K 1500 ±10% 0.324 2.71 3.45 1.25 0.036 -185K 1800 ±10% 0.360 2.57 3.14 1.22 0.036 Operating Temperature -55°C to +125°C; -55°C to +80°C @ full rated current -225K 2200 ±10% 0.494 2.20 2.86 1.26 0.031 -275K 2700 ±10% 0.555 2.07 2.58 1.23 0.031 -335K 3300 ±10% 0.773 1.76 2.33 1.26 0.029 -395K 3900 ±10% 0.845 1.68 2.14 1.23 0.029 Incremental Current Minimum current which causes a 5% maximum decrease in Inductance Power Dissipation at 80°C 3.30 Watts Max. Dielectric Withstanding Voltage 1000 V RMS Min. Marking Parts printed with DELEVAN and API Part Number *Complete part # must include series # PLUS the dash # For further surface finish information, refer to TECHNICAL section of this catalog. Packaging Bulk only API Delevan ® www.delevan.com email: [email protected] 270 Quaker Road, East Aurora NY 14052 • Phone: 716-652-3600 • Fax: 716-652-4814 1/27/2009