AZ943S 15 AMP (SMT) MINIATURE PC BOARD RELAY FEATURES • • • • • High performance Low seated height Flux tight version Class F insulation (155°C) standard UL, CUR file E43203 GENERAL DATA CONTACTS Life Expectancy Mechanical Electrical 1 x 107 1 x 105 at 10 A 277 VAC Res. Operate Time 10 ms max. 5 ms max. (with no coil suppression) Arrangement SPST (1 Form A) SPDT (1 Form C) Release Time Ratings Form A and C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts UL/CUR 1 Form A 15 A at 125 VAC, general use 10A at 277 VAC, general use, 100,000 cycles TV - 5 120 VAC 1/2 HP at 125 VAC 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) Insulation Resistance 100 megohms min. at 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature At nominal coil voltage Operating -40°C(-40°F) to 110°C(230°F) Storage -40°C(-40°F) to 155°C(311°F) 1 Form C 10 A at 277 VAC, general use, 100,000 cycles 1/2 HP at 125 VAC N.O. 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) Vibration 0.062" DA at 10–55 Hz Shock 10 g Material Silver tin oxide (gold plating available) Enclosure P.B.T. polyester Resistance < 100 milliohms initially (24 V, 1 A method) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 10 g COIL Power At Pickup Voltage Max Continuous Dissipation 203 mW 2.4 W at 20°C (68°F) Temperature Rise 32°C (58°F) at nominal coil voltage Temperature Max. 155°C (311°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. 9/10/10 AZ943S RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 5 Must Operate VDC 3.8 Max Continuous VDC 11.2 Coil Resistance ±10% 70 6 4.5 13.4 100 AZ943S–1CH–6DF 9 6.8 20.1 225 AZ943S–1CH–9DF 12 9.0 26.8 400 AZ943S–1CH–12DF 18 13.5 40.2 900 AZ943S–1CH–18DF 24 18.0 53.4 1,600 AZ943S–1CH–24DF 48 36.0 107.3 6,400 AZ943S–1CH–48DF AZ943S–1CH–5DF * Substitute “1AH” in place of “1CH” to indicate 1 Form A contact. Add suffix “G” for gold plated contacts. MECHANICAL DATA PC Board Layout Outline Dimensions .620 MAX [15.75] .758 MAX [19.25] .606 [15.40] 5X.079 [2.00] .601 MAX [15.27] .067 [1.70] .157 [3.99] .079 [2.00] .059 [1.50] .472 [12.00] .043 [1.10] .016 [0.40] .480 [12.19] .236 [6.00] .472 [12.00] 5X.197 [5.00] .059 [1.50] VIEWED TOWARD TERMINALS .620 MAX [15.75] .758 MAX [19.25] Wiring Diagram .472 [12.00] 5x.043 [1.10] .008 [0.20] .059 [1.50] 5x.157 [4.00] .449 [11.40] 2 3 2 5 4 5 1 Form C 3 1 Form A VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Notes The soldering profile to the left is an example and is just to show one of various profiles AZ943S has been tested with. In order to make sure AZ943S fits to a specific profile, we strongly recommend to test under the real environment 9/10/10