AZ9621 10 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • • Extremely low cost Epoxy sealed version available High temperature (105°C) version available Creepage/Clearance 4mm/3mm Class F insulation (155°C) standard UL, CUR file E44211 VDE file pending Life Expectancy Mechanical Electrical CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Form A and C Max. switched power: 2500 VA Max. switched current: 10 A AC Max. switched voltage: 250 VAC UL/CUR Operate Time (Typical) 15 ms Release Time (Typical) 15 ms (with no coil suppression) Dielectric Strength 2500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance 1 Form A (high temperature version) 10 A at 250 VAC, General Purpose, 30k cycles 100 megohms min. at 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage 1 Form C (high temperature version) 10 A (N.O.), 4 A (N.C.) at 250 VAC, General Purpose, 30k cycles (pending) 5 x 106 5 x 104 at 10 A 250 VAC Res. 1 Form A (standard temperature version) 10 A at 250 VAC, General Purpose, 50k cycles 1 Form C (standard temperature version) 10 A (N.O.), 5 A (N.C.) at 250 VAC, General Purpose, 30k cycles VDE GENERAL DATA 1 Form A 10 A at 250 VAC, 30k cycles 1 Form C 10 A (N.O.), 4 A (N.C.) at 250 VAC, 30k cycles Material Silver nickel Resistance < 100 milliohms initially (24 V, 1 A method) COIL Ambient Temperature At nominal coil voltage Operating -40°C (-40°F) to 85°C (185°F) Std. Temp. -40°C (-40°F) to 105°C (221°F) High Temp. Storage -40°C (-40°F) to 155°C (311°F) Vibration >4g at 30-400 Hz Shock >10g (functional) >30g (destructive) Enclosure P.E.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 260°C (500°F) Max. Solder Time 5 seconds Max. Immersion Time 30 seconds Weight 5.6 g Power At Pickup Voltage Max Continuous Dissipation 200 mW 1.8 W at 20°C (68°F) 1. All values at 20°C (68°F). Temperature Rise 33°C (59.4°F) at nominal coil voltage 2. Relay may pull in with less than “Must Operate” value. Temperature Max. 155°C (311°F) 3. Unsealed relays should not be dip cleaned. NOTES 4. Specifications subject to change without notice. 9/28/05W AZ9621 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 5 Max. Continuous VDC 8.0 Coil Resistance ±10% 70 Must Operate VDC 3.75 AZ9621–1A–5D AZ9621–1C–5D 6 10.0 100 4.50 AZ9621–1A–6D AZ9621–1C–6D AZ9621–1C–9D 1 Form A 1 Form C 9 14.5 225 6.75 AZ9621–1A–9D 12 18.5 400 9.00 AZ9621–1A–12D AZ9621–1C–12D 18 26.0 900 13.50 AZ9621–1A–18D AZ9621–1C–18D 22 34.0 1345 16.5 AZ9621–1A–22D AZ9621–1C–22D 24 35.5 1600 18.0 AZ9621–1A–24D AZ9621–1C–24D 36 53.3 3600 27.0 AZ9621–1A–36D AZ9621–1C–36D * Add suffix “E” for epoxy sealed version. Add suffix “K” for high temperature version. MECHANICAL DATA Form C Form A .601 MAX [15.25] Wiring Diagram .601 MAX [15.25] .601 MAX [15.25] .601 MAX [15.25] 1 2 5 .797 MAX [20.25] Form A .797 MAX [20.25] .150 [3.80] .150 [3.80] .020 [0.50] .020 [0.50] .295 [7.50] .246 [6.25] TERMINAL DISTANCE .012 [0.30] .039 [1.00] .020 [0.50] .020 [0.50] .039 [1.00] .197 [5.00] 1 2 .012 [0.30] .394 [10.00] 3 .197 [5.00] 4 5 3 Form C .295 [7.50] .197 [5.00] .246 [6.25] .197 [5.00] .049 [1.25] Viewed toward terminals TERMINAL DISTANCE Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 9/28/05W