AZ880 AZ 10 A SPST / 8 A DPST POLARIZED SUBMINIATURE POWER RELAY SINGLE SIDE STABLE (NON-LATCHING) AND BISTABLE (LATCHING) FEATURES • • • • • Dielectric strength 4000 Vrms Single and dual coil latching versions available Epoxy sealed version available 10 Amp switching UL, CUR file E44211 GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 106 at 10 A 250 VAC resistive (SPST) Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) Set Time (typical) 5 ms at nominal coil voltage Reset Time (typical) 4 ms at nominal coil voltage Dielectric Strength (at sea level) 4000 3000 1000 2000 Insulation Resistance 1000 megohms min. at 20°C 500 Vdc 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062” DA at 10 to 55 Hz Shock 10 g functional Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 6 grams CONTACTS Arrangement SPST (1 Form A), DPST (2 Form A) DPST (1 Form A and 1 Form B) Ratings Resistive load: Max. switched power: 300 W or 2500 VA (SPST) 240 W or 2000 VA (DPST) Max. switched current: 10 A (SPST) 8 A (DPST) Max. switched voltage: 150 VDC or 380 VAC* *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR SPST 10 A at 250 VAC general use, 30k cycles 8 A at 30 VDC resistive, 30k cycles 1/3 HP at 250 VAC B300 Pilot Duty DPST 8 A at 250 VAC general use, 30k cycles 8 A at 30 VDC resistive, 30k cycles 1/3 HP at 250 VAC 1/4 HP at 125 VAC Material Silver nickel, silver tin oxide, gold plating optional Resistance < 50 milliohms initially (6 V 1 A voltage drop method) Vrms Vrms Vrms Vrms coil to contact (-1A, -1AB) coil to contact (-2A) between contacts between contact sets COIL Power At Pickup Voltage 137 mW ( 2A single side stable, 2 coil latching) (typical) 98 mW (1 coil latching or 1A or 1AB single side stable) Max. Continuous Dissipation 0.75 W at 20°C (68°F) ambient Temperature Rise 30°C (54°F) at nominal coil voltage Max. Temperature 105°C (221°F) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. 12/07/09 AZ880 AZ RELAY ORDERING DATA AZ880 COIL SPECIFICATIONS - 1 FORM A AND 1 FORM A/1 FORM B Nominal Coil VDC 3 Must. Operate VDC 2.1 5 6 Max. Continuous VDC ORDER NUMBER* 1 Form A 1 Form A 1 Form B 5.8 Coil Resistance ± 10% 45 AZ880-1A-3D AZ880-1AB-3D 3.5 9.7 125 AZ880-1A-5D AZ880-1AB-5D 4.2 11.6 180 AZ880-1A-6D AZ880-1AB-6D 9 6.3 17.4 405 AZ880-1A-9D AZ880-1AB-9D 12 8.4 23.2 720 AZ880-1A-12D AZ880-1AB-12D 24 16.8 46.5 2880 AZ880-1A-24D AZ880-1AB-24D *Add “E” after “1A” or “1AB” for Silver Tin Oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “E” for epoxy sealed version. AZ880 COIL SPECIFICATIONS - 2 FORM A ORDER NUMBER* Nominal Coil VDC 3 Must. Operate VDC 2.1 Max. Continuous VDC 4.9 Coil Resistance ± 10% 32.1 5 3.5 AZ880-2A-3D 8.2 89.3 AZ880-2A-5D 6 9 4.2 9.8 129 AZ880-2A-6D 6.3 14.7 289 AZ880-2A-9D 12 8.4 19.6 514 AZ880-2A-12D 24 16.8 39.3 2056 AZ880-2A-24D 2 Form A *Add “E” after “2A” for Silver Tin Oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “E” for epoxy sealed version. AZ880P1 COIL SPECIFICATIONS - SINGLE COIL LATCHING Nominal Coil VDC 3 Must. Operate VDC 2.1 Max. Continuous VDC 5 3.5 6 ORDER NUMBER* 5.8 Coil Resistance ± 10% 45 2 Form A 1 Form A 1 Form B 9.7 125 AZ880P1-1A-3D AZ880P1-2A-3D AZ880P1-1AB-3D AZ880P1-1A-5D AZ880P1-2A-5D 4.2 11.6 AZ880P1-1AB-5D 180 AZ880P1-1A-6D AZ880P1-2A-6D AZ880P1-1AB-6D 1 Form A 9 6.3 17.4 405 AZ880P1-1A-9D AZ880P1-2A-9D AZ880P1-1AB-9D 12 8.4 23.2 720 AZ880P1-1A-12D AZ880P1-2A-12D AZ880P1-1AB-12D 24 16.8 46.5 2880 AZ880P1-1A-24D AZ880P1-2A-24D AZ880P1-1AB-24D *Add “E” after “1A” or “2A” or “1AB” for Silver Tin Oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “E” for epoxy sealed version. AZ880P2 COIL SPECIFICATIONS - DUAL COIL LATCHING ORDER NUMBER* Nominal Coil VDC 3 Must. Operate VDC 2.1 Max. Continuous VDC AZ880P2-1A-3D AZ880P2-2A-3D AZ880P2-1AB-3D 5 3.5 8.2 89.3 AZ880P2-1A-5D AZ880P2-2A-5D AZ880P2-1AB-5D 6 4.2 9.8 129 AZ880P2-1A-6D AZ880P2-2A-6D AZ880P2-1AB-6D 9 6.3 14.7 289 AZ880P2-1A-9D AZ880P2-2A-9D AZ880P2-1AB-9D 12 8.4 19.6 514 AZ880P2-1A-12D AZ880P2-2A-12D AZ880P2-1AB-12D 24 16.8 39.3 2056 AZ880P2-1A-24D AZ880P2-2A-24D AZ880P2-1AB-24D 4.9 Coil Resistance ± 10% 32.1 1 Form A 2 Form A 1 Form A 1 Form B *Add “E” after “1A” or “2A” or “1AB” for Silver Tin Oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “R” for reversed polarity coil. Add suffix “E” for epoxy sealed version. 12/07/09 AZ880 AZ MECHANICAL DATA PC Board Layout Outline Dimensions Single side stable or 1 coil latching relay Single side stable or 1 coil latching relay 2A &1AB 1A 0.787MAX [20.0] 0.591MAX [15.0] 0.402MAX [10.2] 0.031 [0.80] 0.031 [0.8] 0.142 [3.6] 0.049 [1.25] 0.400 [10.16] 0.049 [1.25] 0.400 [10.16] 0.400 [10.16] 0.400 [10.16] 0.300 [7.62] [0.80] 0.400 [10.16] 0.300 [7.62] 0.400 [10.16] 0.400 [10.16] 0.016 [0.4] 0.031 [0.8] 0.400 [10.16] 4-Ø0.047 [Ø1.2] 0.787MAX [20.0] 2A &1AB 0.787MAX [20.0] 0.591MAX [15.0] 0.591MAX [15.0] 1A 2A &1AB 0.400 [10.16] 0.402MAX [10.2] 0.402MAX [10.2] 0.300 [7.62] 0.400 [10.16] 0.300 [7.62] 0.142 [3.6] 0.142 [3.6] 0.049 [1.25] 6-Ø0.047 [Ø1.2] 2 coil latching relay 2 coil latching relay 1A 0.300 [7.62] 0.402MAX [10.2] 0.142 [3.6] 0.016 [0.4] 0.300 [7.62] 2A &1AB 1A 0.591MAX [15.0] 0.787MAX [20.0] 0.400 [10.16] 0.100 [2.54] 0.300 [7.62] 0.031 [0.8] 0.016 [0.4] 0.400 [10.16] 0.400 [10.16] 0.049 [1.25] 0.100 [2.54] 0.031 [0.8] 0.300 [7.62] 0.016 [0.4] 0.400 [10.16] 0.400 [10.16] 0.400 [10.16] 0.100 [2.54] 0.100 [2.54] 6-Ø0.047 [Ø1.2] 8-Ø0.047 [Ø1.2] Viewed toward terminals Wiring Diagram Single side stable 2A 1A - - + + 2A 1A 1AB - - SET + 2 coil latching relay 1 coil latching relay + + RESET - - SET RESET + 1AB + - - SET + RESET + - 2A 1A - SET + - - RESET + SET + - 1AB - RESET + SET + - RESET + Viewed toward terminals. Relays shown in de-energized or reset state. Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 12/07/09