AZ980 80 AMP MINI-ISO AUTOMOTIVE RELAY FEATURES • • • • 80 Amp contact rating – “Super ISO” High momentary carry current (500 A) High operating temperature (85°C) SPST - N.O. (1 Form A), SPDT (1 Form C) SPST - N.C. (1 Form B) • Quick connect terminals • ISO/TS 16949, ISO14001 CONTACTS GENERAL DATA Arrangement SPST - N.O. (1 Form A), SPST - N.C. (1 Form B), SPDT (1 Form C) Ratings Resistive load: Max. switched power: 1120 W (SPST) Form A 840 W (N.O.) Form C 840 W (N.C.) Form C, Form B Max. switched current: 80 A (SPST) Form A 60 A (N.O.) Form C 60 A (N.C.) Form C, Form B Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 80 A 14 VDC Res. Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 500 Vrms coil to contact (at sea level for 1 min.) 500 Vrms contact to contact Max. switched voltage: 30 VDC Material Silver tin oxide Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) 0.76 W Max. Continuous Dissipation 3.0 W at 20°C (68°F) Temperature Rise 56°C (101°F) at nominal coil voltage Temperature Insulation Resistance 100 megohms min. at 500 VDC, 20°C 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (211°F) Vibration 0.062" DA at 10-55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Copper alloy Quick Connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. 155°C (311°F) Weight 46 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 1/7/15 AZ980 RELAY ORDERING DATA COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil Must Operate Max. Continuous Coil Resistance SPST SPDT VDC VDC VDC ± 10% 6 3.9 7.8 20 AZ980–1A–6D AZ980–1C–6D 12 7.8 19.0 90 AZ980–1A–12D AZ980–1C–12D 24 15.6 37.9 360 AZ980–1A–24D AZ980–1C–24D * For SPST (N.C.) (1 Form B) relay, substitute “-1B” for “-1A”. Add suffix “R” for resistor in parallel with coil. Resistor values: 6V: 180 ohms, 12V: 680 ohms, 24V: 2700 ohms. Add suffix “D” for diode across coil (“+” pole of power supply at terminal #86). Add suffix “E” for epoxy sealed version. HARDWARE ORDERING DATA DESCRIPTION ORDER NUMBER Socket 4 Pin ST980 Socket 5 Pin ST980-1 MECHANICAL DATA Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1/7/15