AZ7695 25 AMP MINIATURE POWER RELAY FEATURES • • • • • • • • • Low cost 25 Amp switching 80 Amp inrush current Short Circuit Rating 5000 A rms, 250 VAC Quick connect and PCB terminals Flux tight construction Class F insulation system available UL, CUR file E44211 TUV 50251020 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) Life Expectancy Mechanical Electrical Ratings Resistive load: Operate Time (max) 20 ms at nominal coil voltage Release Time (max) 10 ms at nominal coil voltage (with no coil suppression) Max. switched power: 6250 VA Max. switched current: 25 A Max. switched voltage: 250 VAC, 30 VDC Rated Load UL, CUR TUV 25A at 250 VAC/30 VDC Resistive, 100k ops, 850C 25A at 250 VAC General use, 100k ops, 850C 2 HP at 240 VAC Motor, 100k ops, 850C 25 FLA / 85 LRA at 250 VAC, 100k ops, 850C 16A/20A/25A 250VAC; cos phi=0, 95 100k ops, 85°C 16A/20A/25A 30VDC; 100k ops, 85°C 16A/20A/25A 250VAC; cos phi=0, 75 100k ops, 85°C NO: 70A/80A for 0,07s 250VAC; cos phi=0, 65 100k ops, 85°C NC: 25A for 4, 93s 250VAC; cos phi=0, 95 100k ops, 85°C Minimum operations 1 x 107 1 x 105 at 25 A 250 VAC Res. Dielectric Strength 5,000 VAC coil to contact (at sea level for 1 min.) 1,000 VAC between open contacts 10,000 V surge contact to coil Insulation Resistance 1000 megohms min. at 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (266°F) Vibration 0.059" DA at 10–55 Hz Shock Operating 10 g Non-Operating 100 g Material silver tin oxide Enclosure P.B.T. polyester Resistance < 100 milliohms initially (6V, 1 A voltage drop method) Terminals Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. COIL Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 23 grams Power At Pickup Voltage (typical) 441 mW Max. Continuous Dissipation 1.5 W at 20°C (73.4°F) ambient Temperature Rise 60°C (140°F) at nominal coil voltage Temperature NOTES Max. 105°C (221°F) 1. All values at 23°C (68°F). Max. 155°C (311°F) Class F 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 3/17/2015 AZ7695 RELAY ORDERING DATA COIL SPECIFICATIONS - PCB TERMINALS WITH QUICK CONNECT TERMINALS Nominal Coil VDC 5 Must Operate VDC 3.5 Max. Continuous VDC 6.5 ORDER NUMBER* Coil Resistance ± 10% 28 Form A (SPST) AZ7695–1A–5D 6 4.2 7.8 40 AZ7695–1A–6D 9 6.3 11.7 90 AZ7695–1A–9D 12 8.4 15.6 160 AZ7695–1A–12D 18 12.6 23.4 360 AZ7695–1A–18D 24 16.8 31.2 640 AZ7695–1A–24D 48 33.6 62.4 2560 AZ7695–1A–48D COIL SPECIFICATIONS - PCB TERMINALS Nominal Coil VDC 5 Must Operate VDC 3.5 Max. Continuous VDC 6.5 6 4.2 7.8 ORDER NUMBER* Coil Resistance ± 10% 28 Form A (SPST) AZ7695–1A–5DK 40 AZ7695–1A–6DK 9 6.3 11.7 90 AZ7695–1A–9DK 12 8.4 15.6 160 AZ7695–1A–12DK 18 12.6 23.4 360 AZ7695–1A–18DK 24 16.8 31.2 640 AZ7695–1A–24DK 48 33.6 62.4 2560 AZ7695–1A–48DK * For epoxy seal change “DK” to “DEK”. For Class F insulation system add suffix “F” to part number. MECHANICAL DATA 0#" 6%23)/. 0#" 15)#+ #/..%#4 6%23)/. ;= -!8 ;= ;= X ;= -!8 ;= ;= ;= -!8 ;= -!8 ;= X ;= ;= -!8 ;= -!8 ;= X ;= X ;= X ;= X ;= X ;= 7)2).' $)!'2!4YPICAL FOR BOTH VERSIONS 0# "/!2$ ,!9/54 4YPICAL FOR BOTH VERSIONS ;= ;= X ;= ;= ;= X ;= X ;= X ;= ;= 6IEWED TOWARD TERMINALS ;= 6IEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/17/2015