Type THF Solid Tantalum Capacitors Hermetically Sealed Axial Lead Solid Tantalum Capacitors The Type THF is ideal for use in switching regulators and high frequency power supplies because of its high ripple current and low ESR capabilities. It is an axial lead solid tantalum capacitor constructed with a rugged hermetically sealed metal case, insulated with an outer polyester wrap. The THF assures a small case size for high capacitance, and is extremely stable over the rated temperature range. Highlights ♦ ♦ ♦ ♦ ♦ ♦ ♦ High Ripple Current Low ESR Lower Impedance at High Frequency Extremely Stable Capacitance Long Life Moisture & Solvent Resistant Small Size Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: DC Leakage: 5.6 µF to 330 µF 6 WVdc to 50 WVdc @ 85 ºC –55 ºC to +125 ºC ( With proper derating) ±10% (K), ±20% (M) At +25 ºC - (See Ratings) At +85 ºC - 10 x Ratings limit At +125 ºC - 12.5 x Ratings limit Outline Drawing Uninsulated 1.50 ±.250 (38.1 ±6.35) 1.50 ±.250 (38.1 ±6.35) C + D L d D Insulated L D L Case ±.005 ±.031 ±.010 ±.031 Code (±.13) (±.79) (±.25) (±.79) Inches (mm) d Quantity C ±.001 Per Maximum (±.03) Reel F .279(7.09) .650(16.51) .289(7.34) .686(17.42) .822(20.88) .025(.64) 500 G .341(8.66) .750(19.05) .351(8.92) .786(19.96) .922(23.42) .025(.64) 400 Part Numbering System THF 157 M 006 P 1 F Case Code F Type Capacitance Tolerance Voltage Polar Mylar Sleeve THF 565 = 5.6 µF K = ±10% 006 = 6 Vdc P = Polar 1 186 = 18.6 µF M = ±20% 020 = 20 Vdc 157 = 150 µF G 050 = 50 Vdc CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type THF Solid Tantalum Capacitors Ratings Max Cap Max Max Max Ripple Catalog Case DCL DF % ESR (ohms) RMS Amps Part Number Code @ +25 ºC @ +25 ºC @ +25 ºC @ 40 kHz (µA) 1 kz 100 kHz +25ºC (µF) 6 WVdc @ 85 ºC 4 WVdc @ 125 ºC 150 THF157K006P1F F 4.5 10 0.065 3.3 180 THF187K006P1F F 5.5 10 0.060 3.4 270 THF277K006P1G G 6.5 10 0.050 4.1 330 THF337K006P1G G 7.5 12 0.045 4.3 2.9 10 WVdc @ 85 ºC 7 WVdc @ 125 ºC 82 THF826K010P1F F 4 8 0.085 100 THF107K010P1F F 5 8 0.075 3.0 120 THF127K010P1F F 6 8 0.070 3.2 180 THF187K010P1G G 9 8 0.060 3.7 220 THF227K010P1G G 10 10 0.055 3.9 6 0.100 2.6 15 WVdc @ 85 ºC 10 WVdc @ 125 ºC 56 THF566K015P1F F 4 68 THF686K015P1F F 5 6 0.095 2.7 120 THF127K015P1G G 9 8 0.070 3.5 150 THF157K015P1G G 10 8 0.065 3.6 20 WVdc @ 85 ºC 13 WVdc @ 125 ºC 27 THF276K020P1F F 2.5 5 0.145 2.2 33 THF336K020P1F F 3.5 5 0.130 2.3 39 THF396K020P1F F 4.0 5 0.120 2.4 47 THF476K020P1F F 4.5 6 0.110 2.5 56 THF566K020P1G G 5.5 6 0.100 2.9 68 THF686K020P1G G 7.0 6 0.095 3.0 82 THF826K020P1G G 8.0 6 0.085 3.1 100 THF107K020P1G G 10.0 8 0.075 3.3 4 0.161 1.5 35 WVdc @ 85 ºC 23 WVdc @ 125 ºC 10 THF106K035P1F F 4.0 22 THF226K035P1F F 4.0 4 0.160 2.1 27 THF276K035P1G G 4.5 4 0.145 2.4 33 THF336K035P1G G 5.5 5 0.130 2.5 39 THF396K035P1G G 7.0 5 0.120 2.6 47 THF476K035P1G G 8.0 5 0.110 2.7 50 WVdc @ 85 ºC 33 WVdc @ 125 ºC 5.6 THF565K050P1F F 2.2 3 0.300 1.5 6.8 THF685K050P1F F 2.2 3 0.275 1.6 8.2 THF825K050P1F F 2.5 3 0.250 1.6 10.0 THF106K050P1F F 2.5 3 0.230 1.7 12.0 THF126K050P1F F 3.0 3 0.210 1.8 15.0 THF156K050P1F F 4.0 3 0.190 1.9 18.0 THF186K050P1F F 4.5 4 0.175 2.0 22.0 THF226K050P1G G 5.5 4 0.160 2.3 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type THF Solid Tantalum Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com