Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Type AFC Capacitors are the choice for high-frequency filtering. At 100 kHz, most ratings can handle more than twice the ripple current of type AHA. With solid performance at temperatures down to –55 ° C, Type AFC has more than 90% capacitance retention at –20 ° C and 1 kHz. With low impedance to beyond 100 kHz, it is ideal for higher power DC/DC converters. The vertical cylindrical cases make for easy automatic mounting and reflow soldering, and offer big savings and higher capacitance compared to tantalum capacitors. Highlights • +105 °C, Up to 1000 Hour Load Life • Capacitance Range: 1 µF to 1500 µF • Voltage Range: 6.3 Vdc to 50 Vdc Specifications Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current: Dissipation Factor: Ripple Current Multiplier: –55 °C to +105 °C 6.3, 10, 16, 25 & 50 Vdc 1.0 µF to 1500 µF ±20% @ 120 Hz and +20 °C 0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater) See ratings table 50/60 Hz 120 Hz 1 kHz 10 kHz 100 kHz Frequency 0.70 Load Life: 1000 h @ +105 °C ∆ Capacitance ±20% DF: ≤200% of limit DCL: ≤100% of limit .0.75 0.90 0.95 1.00 Shelf Life: 1000 h @ +105 °C ∆ Capacitance ±20% DF: ≤200% of limit DCL: ≤100% of limit AFC Series Marking Outline Drawing Case Dimensions Case Dimensions in (mm) Code D ± 0.5 L A ± 0.2 H (max) I (ref) W P (ref) K B 4.0 5.4 +.1,-.2 4.3 5.5 1.8 0.65 ± 0.1 1.0 0.35 + 0.15/-0.20 C 5.0 5.4 +.1,-.2 5.3 6.5 2.2 0.65 ± 0.1 1.5 0.35 + 0.15/-0.20 D 6.3 5.4 +.1,-.2 6.6 7.8 2.4 0.65 ± 0.1 1.8 0.35 + 0.15/-0.20 E 8.0 6.2 ±.3 8.3 9.5 3.4 0.65 ± 0.1 2.2 0.35 + 0.15/-0.20 F 8.0 10.2 ±.3 8.3 10.0 3.4 0.90 ± 0.2 3.2 0.70 ± 0.20 G 10.0 10.2 ±.3 10.3 12.0 3.5 0.90 ± 0.2 4.6 0.70 ± 0.20 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C Ratings Table Cap (µF) Catalog Part Number 22.0 47.0 100.0 220.0 330.0 1000.0 1500.0 AFC226M06B12T AFC476M06C12T AFC107M06D16T AFC227M06E16T AFC337M06F24T AFC108M06G24T AFC158M06G24T 33.0 100.0 150.0 220.0 470.0 1000.0 Max. Max. Dissipation Max. Impedance DCL Factor @ ESR @ @ 100 kHz 2 min 120 Hz 120 Hz20 °C 20 °C (mA) 20 °C (Ω) (Ω) 6.3 Vdc (8 Vdc Surge) 3.0 3.0 6.3 13.9 20.8 63.0 94.5 0.26 0.26 0.26 0.26 0.26 0.26 0.26 AFC336M10C12T AFC107M10E16T AFC157M10E16T AFC227M10F24T AFC477M10G24T AFC108M10G24T 3.3 10.0 15.0 22.0 47.0 100.0 0.19 0.19 0.19 0.19 0.19 0.22 10.0 22.0 47.0 68.0 100.0 220.0 330.0 470.0 680.0 AFC106M16B12T AFC226M16C12T AFC476M16D16T AFC686M16E16T AFC107M16E16T AFC227M16G24T AFC337M16G24T AFC477M16G24T AFC687M16G24T 3.0 3.5 7.5 10.9 16.0 35.2 52.8 75.2 108.8 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 6.8 22.0 33.0 47.0 68.0 100.0 220.0 330.0 470.0 AFC685M25B12T AFC226M25D16T AFC336M25D16T AFC476M25E16T AFC686M25F24T AFC107M25F24T AFC227M25G24T AFC337M25G24T AFC477M25G24T 3.0 5.5 8.3 11.8 17.0 25.0 55.0 82.5 117.5 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 1.0 2.2 3.3 4.7 6.8 10.0 22.0 33.0 47.0 100.0 220.0 330.0 AFC105M35B12T AFC225M35B12T AFC335M35B12T AFC475M35B12T AFC685M35C12T AFC106M35C12T AFC226M35D16T AFC336M35E16T AFC476M35E16T AFC107M35G24T AFC227M35G24T AFC337M35G24T 3.0 3.0 3.0 3.0 3.0 3.5 7.7 11.6 16.5 35.0 77.0 115.5 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 100.0 220.0 AFC105M50B12T AFC225M50B12T AFC335M50B12T AFC475M50C12T AFC106M50D16T AFC226M50E16T AFC336M50F24T AFC476M50G24T AFC107M50G24T AFC227M50G24T 3.0 3.0 3.0 3.0 5.0 11.0 16.5 23.5 50.0 110.0 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Max. Ripple Current @ 105 °C 100 kHz (mA) Case Size (mm) Quantity Code DxL per Reel 19.60 9.20 4.30 2.00 1.30 0.43 0.29 3.00 1.80 1.00 0.40 0.30 0.15 0.15 60 95 140 230 450 670 670 B C D E F G G 4 x 5.4 5 x 5.4 6.3 x 5.4 8 x 6.2 8 x 10.2 10 x 10.2 10 x 10.2 2000 1000 1000 1000 500 500 500 9.60 3.20 2.10 1.40 0.67 0.36 1.80 0.40 0.40 0.30 0.15 0.15 95 230 230 450 670 670 C E E F G G 5 x 5.4 8 x 6.2 8 x 6.2 8 x 10.2 10 x 10.2 10 x 10.2 1000 1000 1000 500 500 500 26.50 12.10 5.70 3.90 2.70 1.20 0.80 0.60 0.40 3.00 1.80 1.00 0.40 0.40 0.15 0.15 0.15 0.15 60 95 140 230 230 670 670 670 670 B C D E E G G G G 4 x 5.4 5 x 5.4 6.3 x 5.4 8 x 6.2 8 x 6.2 10 x 10.2 10 x 10.2 10 x 10.2 10 x 10.2 2000 1000 1000 1000 1000 500 500 500 500 34.10 10.60 7.00 4.90 3.40 2.30 1.10 0.70 0.50 3.00 1.00 1.00 0.40 0.30 0.30 0.15 0.15 0.15 60 140 140 230 450 450 670 670 670 B D D E F F G G G 4 x 5.4 6.3 x 5.4 6.3 x 5.4 8 x 6.2 8 x 10.2 8 x 10.2 10 x 10.2 10 x 10.2 10 x 10.2 2000 1000 1000 1000 500 500 500 500 500 199.00 90.40 60.30 42.40 29.30 19.90 9.10 6.00 4.20 2.00 0.90 0.60 3.00 3.00 3.00 3.00 1.80 1.80 1.00 0.40 0.40 0.20 0.15 0.15 60 60 60 60 95 95 140 230 230 670 670 670 B B B B C C D E E G G G 4 x 5.4 4 x 5.4 4 x 5.4 4 x 5.4 5 x 5.4 5 x 5.4 6.3 x 5.4 8 x 6.2 8 x 6.2 10 x 10.2 10 x 10.2 10 x 10.2 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 199.00 90.50 60.30 42.40 19.90 9.10 6.00 4.20 2.00 0.90 5.00 5.00 5.00 3.00 2.00 0.70 0.60 0.30 0.30 0.30 30 30 30 50 70 120 300 500 500 500 B B B C D E F G G G 4 x 5.4 4 x 5.4 4 x 5.4 5 x 5.4 6.3 x 5.4 8 x 6.2 8 x 10.2 10 x 10.2 10 x 10.2 10 x 10.2 2000 2000 2000 1000 1000 1000 500 500 500 500 10 Vdc (13 Vdc Surge) 16 Vdc (20 Vdc Surge) 25 Vdc (31 Vdc Surge) 35 Vdc (44 Vdc Surge) 50 Vdc (63 Vdc Surge) Part Numbering System AFC 106 M 16 B 12T I I I I I I Type Capacitance Capacitance Voltage Case Packaging 105 = 1.0 µF Tolerance 06 = 6.3 Vdc 25 = 25 Vdc 106 = 10.0 µF M = ±20% 10 = 10 Vdc 35 = 35 Vdc 16 = 16 Vdc 50 = 50 Vdc 107 = 100.0 µF 108 = 1000 µF Code Information –F RoHS Compliant 12 = Carrier tape Width (mm) T = Tape & Reel B = bulk CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C Typical Performance Curves CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type AFC –55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com