Type 730P, Metallized Polypropylene Film Capacitors

Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
The 730P series is designed and manufactured for use in many
demanding power applications. They are non-inductively wound
using the most reliable metallized polypropylene film available.
A wide range of capacitance values, voltage ratings, lead
terminations and sizes offer the designer an array of options to
best meet the form, fit and function requirements specified.
Highlights
Specifications
- Excellent AC performance
- Low power dissipation
- Low dielectric absorption
- Close tolerance
- High stability
- Compliant to RoHS directive 2002/95/EC
Capacitance Range
0.022 to 10.0 µF
Capacitance Tolerance
±20% , ±10%, ±5%
Rated Voltage
100 to 630 Vdc (70 VRMS to 275 VRMS , 60 to 400 Hz)
Operating Temperature Range
–55 ºC to 85 ºC
Voltage Derating
At +105 ºC, 50%of +85 ºC rating
ESR
20 kHz to 100 kHz
Dissipation Factor
0.1% maximum - Measure all units at 1000 Hz, at +25 ºC
Insulation Resistance
Measured at 100 WVDC after a 2 min charge:
At +25 ºC: 200 000 MΩ/µF or 400 000 MΩ minimum
At +85 ºC: 10 000 MΩ/µF or 20 000 MΩ minimum
At +105 ºC: 1000 MΩ/µF or 2000 MΩ minimum
DC Voltage Test
200% of rated voltage for 2 minutes
AC Voltage Test
130% of rated RMS voltage at 60 Hz for 15 seconds
Vibration Test (Condition B)
No mechanical damage, short, open or intermittent circuits
DC Life Test
150% of rated voltage for 1000 h at +85 ºC.
No open or short circuits. No visible damage.
Maximum Δ CAP ±1.0%
Minimum IR = 50% of initial limit
Maximum DF = 0.12%
Humidity Test
95% relative humidity at +40 ºC for 250 h.
No visible damage.
Maximum Δ CAP ±1.0%
Minimum IR = 20% of initial limit
Maximum DF = 0.12%
AC Life Test
110% of rated RMS voltage at 60 Hz for 1000 h at +85 ºC
Maximum Δ CAP ±5%
Minimum IR = 50% of initial limit
Maximum DF = 0.12%
Physical Characteristics
Lead Pull: 5 lb (2.3 g) for one min. No physical damage.
Lead Bend: After three complete consecutive bend. No damage.
Dimensions
RoHS Compliant
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
Part Numbering System
730P
106
X
CDE Type
Number
Capacitance in µF
10 µF
5
2
XXX
Tolerance
5 = ±5%
9 = ±10%
Voltage
1 = 100 Vdc
2 = 250 Vdc
4 = 400 Vdc
6 = 630 Vdc
Special
Construction
Ratings
Case Size
CAPACITANCE
Catalog Part
D
L
(μF)
Number
Inches [MM]
Inches [MM]
0.22
730P224X9100
0.275 [7.0]
0.75 [19.0]
ESR
(mΩ)
20 Khz
to
100 Khz
Maximum Ripple Current
(Arms ) at 20 Khz
Case Temperature (2) at
+25°C
+35°C
+45°C
+55°C
+65°C
+75°C
+85°C
2.3
2.3
2.3
2.3
2.3
1.8
1.0
100VDC
-
0.27
730P274X9100
0.298 [7.6]
0.75 [19.0]
-
2.6
2.6
2.6
2.6
2.4
1.9
1.1
0.33
730P334X9100
0.324 [8.2]
0.75 [19.0]
-
2.8
2.8
2.8
2.8
2.6
2.2
1.2
0.39
730P394X9100
0.347 [8.8]
0.75 [19.0]
-
3.1
3.1
3.1
3.1
2.9
2.3
1.3
0.47
730P474X9100
0.376 [9.6]
0.75 [19.0]
37
3.7
3.4
3.1
2.8
2.5
2.0
1.4
0.56
730P564X9100
0.321 [8.2]
1.00 [25.4]
35
3.9
3.6
3.3
2.9
2.6
2.1
1.5
0.68
730P684X9100
0.348 [8.8]
1.00 [25.4]
33
4.1
3.8
3.5
3.1
2.8
2.2
1.6
0.82
730P824X9100
0.377 [9.6]
1.00 [25.4]
31
4.3
4.0
3.6
3.2
2.9
2.3
1.7
1.0
730P105X9100
0.421 [10.7]
1.00 [25.4]
26
5.5
5.1
4.7
4.2
3.6
2.8
2.6
1.2
730P125X9100
0.454 [11.5]
1.00 [25.4]
24
5.7
5.3
4.9
4.4
3.8
3.0
2.8
1.5
730P155X9100
0.500 [12.7]
1.00 [25.4]
20
6.1
5.5
5.1
4.6
4.0
3.2
3.1
1.8
730P185X9100
0.541 [13.7]
1.00 [25.4]
19
6.3
5.7
5.3
4.8
4.1
3.4
3.0
2.0
730P205X9100
0.486 [12.3]
1.25 [31.8]
18
6.5
6.0
5.5
4.9
4.2
3.5
3.2
2.2
730P225X9100
0.507 [12.9]
1.25 [31.8]
18
6.8
6.3
5.7
5.1
4.4
3.6
3.3
2.7
730P275X9100
0.554 [14.1]
1.25 [31.8]
17
7.1
6.5
6.0
5.3
4.6
3.7
3.4
3.0
730P305X9100
0.581 [14.8]
1.25 [31.8]
16
7.3
6.7
6.2
5.5
4.8
3.9
3.5
3.3
730P335X9100
0.606 [15.4]
1.25 [31.8]
16
7.4
6.8
6.4
5.6
4.9
4.0
3.6
3.9
730P395X9100
0.654 [16.6]
1.25 [31.8]
15
7.6
6.9
6.6
5.8
5.1
4.1
3.7
4.0
730P405X9100
0.537 [13.6]
1.75 [44.5]
15
7.8
7.0
6.7
5.9
5.2
4.2
3.8
4.7
730P475X9100
0.577 [14.7]
1.75 [44.5]
15
8.1
7.4
6.8
6.0
5.3
4.3
3.9
5.0
730P505X9100
0.593 [15.1]
1.75 [44.5]
14
8.3
7.6
7.0
6.2
5.4
4.4
4.0
5.6
730P565X9100
0.624 [15.8]
1.75 [44.5]
14
8.4
7.7
7.1
6.4
5.5
4.5
4.1
6.0
730P605X9100
0.644 [16.4]
1.75 [44.5]
14
8.5
7.8
7.2
6.5
5.6
4.6
4.2
6.8
730P685X9100
0.682 [17.3]
1.75 [44.5]
13
8.5
8.0
7.4
6.7
5.7
4.7
4.3
8.0
730P805X9100
0.735 [18.7]
1.75 [44.5]
13
8.6
8.3
7.7
6.8
6.0
4.8
4.4
8.2
730P825X9100
0.743 [18.9]
1.75 [44.5]
13
8.8
8.6
8.0
7.0
6.1
4.9
4.5
10.0
730P106X9100
0.815 [20.7]
1.75 [44.5]
12
9.0
9.0
8.5
7.6
6.6
5.4
4.9
Notes
Other capacitance values and voltage ratings are available upon request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/μF. The maximum rate voltage change is 10 V/μs.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
Case Size
CAPACITANCE
Catalog Part
D
L
(μF)
Number
0.1
730P104X9250
0.279 [7.1]
0.75 [19.0]
0.12
730P124X9250
0.300 [7.6]
0.15
730P154X9250
0.327 [8.3]
0.18
730P184X9250
0.22
0.27
Inches [MM] Inches [MM]
ESR
(mΩ)
20 Khz
to
100 Khz
Maximum Ripple Current
(Arms ) at 20 Khz
Case Temperature (2) at
+25°C
+35°C
+45°C
+55°C
+65°C
+75°C
+85°C
-
1.5
1.5
1.5
1.5
1.5
1.5
0.9
0.75 [19.0]
-
1.9
1.9
1.9
1.9
1.9
1.7
1.1
0.75 [19.0]
-
2.3
2.3
2.3
2.3
2.3
1.9
1.1
0.353 [9.0]
0.75 [19.0]
-
2.7
2.7
2.7
2.7
2.5
2.0
1.2
730P224X9250
0.306 [7.8]
1.00 [25.4]
-
1.9
1.9
1.9
1.9
1.9
1.9
1.3
730P274X9250
0.333 [8.5]
1.00 [25.4]
-
2.4
2.4
2.4
2.4
2.4
2.2
1.4
0.33
730P334X9250
0.362 [9.2]
1.00 [25.4]
-
2.9
2.9
2.9
2.9
2.9
2.3
1.5
0.39
730P394X9250
0.389 [9.9]
1.00 [25.4]
-
3.4
3.4
3.4
3.2
2.9
2.3
1.6
0.47
730P474X9250
0.422 [10.7]
1.00 [25.4]
35
3.8
3.7
3.6
3.4
2.9
2.4
1.7
0.56
730P564X9250
0.464 [11.8]
1.00 [25.4]
33
3.9
3.8
3.7
3.5
3.1
2.5
1.8
0.68
730P684X9250
0.425 [10.8]
1.25 [31.8]
32
4.0
3.9
3.8
3.7
3.2
2.6
1.9
0.82
730P824X9250
0.471 [12.0]
1.25 [31.8]
31
4.2
4.1
4.0
3.9
3.4
2.8
2.0
1.0
730P105X9250
0.513 [13.0]
1.25 [31.8]
28
4.4
4.4
4.4
4.4
4.3
3.5
3.2
1.2
730P125X9250
0.554 [14.1]
1.25 [31.8]
27
4.7
4.6
4.5
5.0
4.5
3.7
3.3
1.5
730P155X9250
0.613 [15.6]
1.25 [31.8]
26
5.1
5.0
4.9
5.4
4.7
3.9
3.5
1.8
730P185X9250
0.667 [17.0]
1.25 [31.8]
25
5.9
5.8
5.7
5.7
5.0
4.1
3.7
2.0
730P205X9250
0.700 [17.8]
1.25 [31.8]
21
7.2
7.2
6.8
6.0
5.2
4.3
3.9
2.2
730P225X9250
0.610 [15.5]
1.75 [44.5]
20
8.4
7.5
7.0
6.3
5.4
4.5
4.1
2.7
730P275X9250
0.669 [17.0]
1.75 [44.5]
19
8.6
7.8
7.3
6.6
5.7
4.7
4.3
3.0
730P305X9250
0.703 [17.9]
1.75 [44.5]
18
9.0
8.3
7.6
6.8
5.9
4.8
4.4
3.3
730P335X9250
0.734 [18.6]
1.75 [44.5]
18
9.0
8.4
7.8
7.0
6.0
4.9
4.5
3.9
730P395X9250
0.794 [20.2]
1.75 [44.5]
17
9.0
8.5
8.0
7.2
6.2
5.0
4.6
4.0
730P405X9250
0.803 [20.4]
1.75 [44.5]
16
9.0
8.6
8.2
7.4
6.3
5.1
4.7
4.7
730P475X9250
0.866 [22.0]
1.75 [44.5]
16
9.0
8.8
8.5
7.7
6.6
5.3
4.9
5.0
730P505X9250
0.892 [22.7]
1.75 [44.5]
15
9.0
9.0
8.8
7.9
6.8
5.6
5.1
5.6
730P565X9250
0.941 [23.9]
1.75 [44.5]
15
9.0
9.0
8.9
8.0
7.0
5.8
5.3
6.0
730P605X9250
0.972 [24.7]
1.75 [44.5]
15
9.0
9.0
9.0
8.2
7.2
5.9
5.5
6.8
730P685X9250
0.882 [22.4]
2.25 [57.2]
15
9.0
9.0
9.0
8.4
7.4
6.0
5.6
8.0
730P805X9250
0.953 [24.2]
2.25 [57.2]
14
9.0
9.0
9.0
8.7
7.8
6.3
5.8
8.2
730P825X9250
0.964 [24.5]
2.25 [57.2]
14
9.0
9.0
9.0
8.8
7.9
6.4
5.9
10.0
730P106X9250
1.060 [26.9]
2.25 [57.2]
13
9.0
9.0
9.0
8.9
8.3
6.8
6.2
0.047
730P473X9400
0.258 [6.6]
0.75 [19.0]
-
1.0
1.0
1.0
1.0
1.0
1.0
0.9
0.056
730P563X9400
0.275 [7.0]
0.75 [19.0]
-
1.1
1.1
1.1
1.1
1.1
1.1
0.9
0.068
730P683X9400
0.297 [7.5]
0.75 [19.0]
-
1.4
1.4
1.4
1.4
1.4
1.4
1.0
250VDC
400VDC
Notes
Other capacitance values and voltage ratings are available upon request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/μF. The maximum rate voltage change is 10 V/μs.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
Case Size
D
L
ESR
(mΩ)
20 Khz
to
100 Khz
CAPACITANCE
Catalog Part
(μF)
Number
0.082
730P823X9400
0.320 [8.1]
0.75 [19.0]
-
0.10
730P104X9400
0.348 [8.8]
0.75 [19.0]
0.12
730P124X9400
0.299 [7.6]
1.00 [25.4]
0.15
730P154X9400
0.328 [8.3]
0.18
730P184X9400
0.353 [9.0]
0.22
730P224X9400
0.27
730P274X9400
0.33
730P334X9400
0.39
730P394X9400
0.47
0.56
Inches [MM] Inches [MM]
Maximum Ripple Current
(Arms ) at 20 Khz
Case Temperature (2) at
+25°C
+35°C
+45°C
+55°C
+65°C
+75°C
+85°C
1.7
1.7
1.7
1.7
1.7
1.6
1.1
-
2.0
2.0
2.0
2.0
2.0
1.9
1.3
-
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.00 [25.4]
-
1.7
1.7
1.7
1.7
1.7
1.7
1.6
1.00 [25.4]
-
2.1
2.1
2.1
2.1
2.1
2.1
1.7
0.385 [9.8]
1.00 [25.4]
-
2.6
2.6
2.6
2.6
2.6
2.5
1.8
0.421 [10.7]
1.00 [25.4]
-
3.1
3.1
3.1
3.1
3.1
2.7
1.9
0.469 [11.9]
1.00 [25.4]
-
3.8
3.8
3.8
3.8
3.5
2.9
2.0
0.503 [12.8]
1.00 [25.4]
-
4.1
4.1
4.1
4.1
3.7
3.1
2.1
730P474X9400
0.545 [13.8]
1.00 [25.4]
32.0
5.7
5.5
5.0
4.4
3.8
3.2
2.2
730P564X9400
0.506 [12.9]
1.25 [31.8]
31.0
5.7
5.7
5.3
4.4
4.1
3.3
2.3
400VDC
0.68
730P684X9400
0.551 [14.0]
1.25 [31.8]
30.0
5.7
5.7
5.5
4.8
4.3
3.5
2.4
0.82
730P824X9400
0.599 [15.2]
1.25 [31.8]
28.0
5.7
5.7
5.6
5.3
4.5
3.7
2.6
1.0
730P105X9400
0.655 [16.6]
1.25 [31.8]
27.0
5.7
5.7
5.7
5.7
5.7
4.7
4.3
1.2
730P125X9400
0.712 [18.1]
1.25 [31.8]
26.0
6.3
6.2
6.0
5.9
5.8
4.9
4.5
1.5
730P155X9400
0.658 [16.7]
1.75 [44.5]
25.0
7.0
6.9
6.7
6.6
6.5
5.2
4.7
1.8
730P185X9400
0.716 [18.2]
1.75 [44.5]
23.0
8.0
7.9
7.8
7.7
6.8
5.5
5.0
2.0
730P205X9400
0.752 [19.1]
1.75 [44.5]
21.0
9.0
9.0
9.0
8.0
7.0
5.7
5.2
2.2
730P225X9400
0.786 [20.0]
1.75 [44.5]
20.0
9.0
9.0
9.0
8.3
7.4
5.9
5.4
2.7
730P275X9400
0.865 [22.0]
1.75 [44.5]
19.0
9.0
9.0
9.0
8.6
7.6
6.0
5.6
3.0
730P305X9400
0.909 [23.1]
1.75 [44.5]
17.0
9.0
9.0
9.0
9.0
7.9
6.4
5.9
3.3
730P335X9400
0.951 [24.2]
1.75 [44.5]
16.0
9.0
9.0
9.0
9.0
8.1
6.6
6.3
3.9
730P395X9400
1.031 [26.2]
1.75 [44.5]
15.0
9.0
9.0
9.0
9.0
8.3
6.8
6.5
630VDC
0.022
730P223X9630
0.283 [7.2]
0.75 [19.0]
-
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.027
730P273X9630
0.307 [7.8]
0.75 [19.0]
-
1.0
1.0
1.0
1.0
1.0
1.0
0.9
0.033
730P333X9630
0.334 [8.5]
0.75 [19.0]
-
1.2
1.2
1.2
1.2
1.2
1.2
1.0
0.039
730P393X9630
0.358 [9.1]
0.75 [19.0]
-
1.4
1.4
1.4
1.4
1.4
1.4
1.0
0.047
730P473X9630
0.388 [9.9]
0.75 [19.0]
-
1.7
1.7
1.7
1.7
1.7
1.6
1.1
0.056
730P563X9630
0.418 [10.6]
0.75 [19.0]
-
2.1
2.1
2.1
2.1
2.1
1.7
1.2
0.068
730P683X9630
0.346 [8.8]
1.00 [25.4]
-
1.3
1.3
1.3
1.3
1.3
1.3
1.3
0.082
730P823X9630
0.374 [9.5]
1.00 [25.4]
-
1.6
1.6
1.6
1.6
1.6
1.6
1.6
0.10
730P104X9630
0.408 [10.4]
1.00 [25.4]
-
1.9
1.9
1.9
1.9
1.9
1.9
1.6
0.12
730P124X9630
0.443 [11.3]
1.00 [25.4]
-
2.3
2.3
2.3
2.3
2.3
2.3
1.8
0.15
730P154X9630
0.496 [12.6]
1.00 [25.4]
-
2.9
2.9
2.9
2.9
2.9
2.9
1.9
0.18
730P184X9630
0.538 [13.7]
1.00 [25.4]
-
3.5
3.5
3.5
3.5
3.5
2.7
1.9
Notes
Other capacitance values and voltage ratings are available on request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/μF. The maximum rate voltage change is 10 V/μs.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
Case Size
CAPACITANCE
Catalog Part
(μF)
Number
D
L
Inches [MM] Inches [MM]
ESR
(mΩ)
20 Khz
to
100 Khz
Maximum Ripple Current
(Arms ) at 20 Khz
Case Temperature (2) at
+25°C
+35°C
+45°C
+55°C
+65°C
+75°C
+85°C
630VDC
0.22
730P224X9630
0.496 [12.6]
1.25 [31.8]
-
2.8
2.8
2.8
2.8
2.8
2.8
2.3
0.27
730P274X9630
0.542 [13.8]
1.25 [31.8]
-
3.5
3.5
3.5
3.5
3.5
3.3
2.3
0.33
730P334X9630
0.593 [15.1]
1.25 [31.8]
-
4.3
4.3
4.3
4.3
4.3
3.5
2.4
0.39
730P394X9630
0.639 [16.2]
1.25 [31.8]
-
5.0
5.0
5.0
5.0
4.6
3.7
2.5
0.47
730P474X9630
0.696 [17.7]
1.25 [31.8]
28.0
6.8
6.3
5.8
5.2
4.5
3.6
2.6
0.56
730P564X9630
0.608 [15.4]
1.75 [44.5]
26.0
7.4
6.9
6.3
5.6
4.8
4.0
2.8
0.68
730P684X9630
0.664 [16.9]
1.75 [44.5]
25.0
7.8
7.2
6.6
5.9
5.1
4.2
2.9
0.82
730P824X9630
0.724 [18.4]
1.75 [44.5]
22.0
8.1
7.5
6.9
6.2
5.3
4.3
3.1
1.0
730P105X9630
0.794 [20.2]
1.75 [44.5]
18.0
8.6
7.9
7.3
6.5
5.6
4.6
3.6
Notes
Other capacitance values and voltage ratings are available on request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/μF. The maximum rate voltage change is 10 V/μs.
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.