10/08 PADA ENGINEERING S.r.l. PADA ViaENGINEERING G.B. Pirelli 11 S.r.l. I – 61030 Saltara (PU) - Italy Via G.B. Pirelli 11 I – 61030 Saltara - Italy Tel. +39 0721(PU) 899555 Fax +39 0721 897064 Tel. +39 0721 899555 Fax +39 0721 897064 Email: [email protected] Web: www.pada.it Email: [email protected] Web: www.pada.it EasyClick EasyClick is a new generation of heat sinks developed to shorten the assembling time. With the new EasyClick, in PCB applications, the electronic devices (TO 220, TO 247, etc) can be easily fixed on EasyClick the heat sink by means of rapid clutch steel clips. 1 2 04 EasyClick 06 Mounting Procedure 10 EasyClick Profiles 13 Profiles Table 14 Clips Table 15 Profiles Clips Matching Table Ea s y C li c k Contents 3 EasyClick Easy Click is a new generation of heat sinks conceived by our Research & Development Dept. together with some of our major customers. This product range, developed for PCB, allows the shortening of the assembling time by means of rapid clutch steel clips. The advantages of this system are the following: - no screws, rivets or other mechanical pieces are necessary for the assembly - more safety for mechanical mating: clips seats spring up with light pressure exerted on the spring itself - more flexibility: various clips are available for different clamping forces (3,5 and 8 kg) - lower costs thanks to the optimum clips and profile groove fitting 4 EasyClick - lower stress on components: clamping forces are gauged and perpendicular to the components centre. EasyClick 5 Mounting Procedure 1. Positioning 2. Mounting Direction F 3.Coupling 4.Component Unlock 6 Ea s y C li c k F: Clamping Force Ea s y C li c k EasyClick Profiles 7 EasyClick 8 EasyClick 9 EasyClick Profiles 8665 8665 8671 8671 8665 1.130 kg/m 8674 8674 8671 1.810 kg/m 8674 1.287 kg/m 31,7 31,7 30 2,4 30 2,4 30 30 40 45 58,7 30 40 45 58,7 30 30 30 32 32 2,1 2,1 8 2,1 2,1 2,4 8 8 6 2,4 8 6 8691 8691 0.785 kg/m 8692 8692 1.277 kg/m 8691 8693 8693 1.448 kg/m 8693 8692 38 2,4 38 17 2,4 54,1 17 2 54,1 2 37,3 31,5 30 37,3 31,5 30 54 26 26 13 2,5 2,5 2,5 54 30 13 8 6 8 2,5 8 30 7 8 7 2,4 6 2,4 10 EasyClick 6 Drawings scale 1:1 Dimensions are subject to extrusion tolerances EN 755 - 9 (Aluminium and aluminium alloys) EasyClick Profiles 8695 8694 8695869586958695 8694869486948694 8694 8701870187018701 8695 1.070 kg/m 8701 0.529 kg/m 1.219 kg/m 30 30 2,4 30 30 30 30 2,4 2,4 2,4 2,4 32,1 45 6 6 6 30 6 6 47,2 26,6 32,1 32,132,132,1 26,626,626,626,6 47,247,247,247,2 25 30 30 30 30 2,4 25 25 25 25 2,4 2,4 2,4 2,4 7,5 2,4 2,4 2,4 2,4 2,4 2,5 30 30 30 30 2,5 2,5 2,5 2,5 17,6 17,617,617,617,6 45 45 45 45 8701 3,2 7,5 7,5 7,5 7,5 11 3,2 3,2 3,2 3,2 8 11 11 11 11 8 8702 8 8 8 8705 8703 87028702 87028702 8702 8705870587058705 8703870387038703 8703 3.279 kg/m 8705 0.897 kg/m 1.532 Kg/m 63,5 63,563,563,563,5 30 50 30 30 30 30 50 50 50 50 2,5 2,5 2,5 2,5 2,5 33,6 33,633,633,633,6 31,5 26 2631,5 26 31,531,5 2631,5 26 60 60 60 60 29,6 29,629,629,629,6 2,5 2,5 2,5 2,5 2,5 60 13 60 60 60 60 54 54 13 13 13 13 2,4 2,4 2,4 2,4 2,4 8 8 8 8 30 30 30 30 30 8 3,2 50 50 50 50 50 60 60 60 60 8 3,2 3,2 3,2 3,2 60 Drawings scale 1:1 Dimensions are subject to extrusion tolerances EN 755 - 9 (Aluminium and aluminium alloys) 8 8 8 8 EasyClick 60 11 EasyClick Profiles 8706 8707 8706 8710 8707 1.375 kg/m 8710 2.309 kg/m 2.900 kg/m 30 34 4,3 2,5 27 77,1 75 50 6 6 6 25 30 29 2,7 3,2 2,4 6,7 8 8 8712 8712 8728 1.417 kg/m 8729 1.053 kg/m 1.663 kg/m 22,5 38 2,4 27 38 2,4 2,4 54 65 60 54 6 30 29 6 31,5 30 2,4 3 5,5 2,5 2,4 3 5 2,4 12 EasyClick 7,5 4,3 Drawings scale 1:1 Dimensions are subject to extrusion tolerances EN 755 - 9 (Aluminium and aluminium alloys) Profiles Table Profile Weight Type 8665 1.130 A 5.5 8671 1.810 A 5.3 kg/m Rth@L=100mm °C/W 8674 1.287 A 5.0 8691 0.785 A 10.3 8692 1.277 A 5.4 8693 1.448 A 3.5 8694 1.070 A 5.3 8695 0.529 A 8.6 8701 1.219 B 6.4 8702 3.279 A 2.0 8703 0.897 A 7.7 8705 1.532 B 5.2 8706 1.375 A 5.6 8707 2.309 A 3.2 8710 2.900 A 2.9 8712 1.417 A 3.5 8728 1.053 B 5.9 8729 1.663 A 5.4 Rth values are referred to a temperature difference of 45°C between heatsink and room temperature. These values have been calculated on a raw profile placed in vertical position. TYPE “A” TYPE “B” EasyClick Hooking System: 13 Clips Table 14 EasyClick Type Nominal F L B H Type A kg mm mm mm 7700 7701 5 3 24 24 15 15 19 19 X X 7702 7703 7704 7705 5 3 3 3 20 20 20 24 15 15 8 10 15 15 15 19 X X X X 7706 7707 7708 7709 7710 7711 7714 7715 7716 7717 5 5 3 3 5 5 8 8 3 5 20 24 24 29 24 29 20 24 24 24 10 10 15 15 15 15 14 15 10 10 15 19 17 22 17 22 15 19 17 17 X X Type B X X X X X X X X EasyClick Profiles Clips Matching Table 15 Profiles clips matching table Component Profile Thickness 7700 7701 7702 7703 7704 7705 7706 7707 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 77 mm 8665 8671 8674 8691 8692 8693 8694 8695 8701 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 35 25 35 25 25 25 35 35 4.5 45 30 45 30 30 30 45 45 5 55 35 55 35 35 35 55 55 4 2 4.5 3 5 8702 8703 8705 3 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 4 2 4.5 3 5 8706 8707 8710 8712 3 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 4 8728 16 EasyClick 8729 2 4.5 3 5 3 4 35 25 35 25 25 25 25 35 4.5 45 30 45 30 30 30 30 45 5 55 35 55 35 35 35 35 55 Force Applied on the Component (N) as a fuction of Component Thickness and Clip Type 7708 7709 7710 7711 7714 7715 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 7716 7717 25 25 35 35 25 35 30 30 45 45 30 45 35 35 55 55 35 55 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 25 25 35 35 25 35 30 30 45 45 30 45 35 35 55 55 35 55 35 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 5 70 70 5 80 80 5 90 90 25 25 35 35 25 30 30 45 45 30 45 35 35 55 55 35 55 5 70 70 5 80 80 5 90 90 EasyClick 07 17 18 EasyClick Notes EasyClick Notes 19 20 EasyClick Notes 10/08 PADA ENGINEERING S.r.l. PADA ViaENGINEERING G.B. Pirelli 11 S.r.l. I – 61030 Saltara (PU) - Italy Via G.B. Pirelli 11 I – 61030 Saltara - Italy Tel. +39 0721(PU) 899555 Fax +39 0721 897064 Tel. +39 0721 899555 Fax +39 0721 897064 Email: [email protected] Web: www.pada.it Email: [email protected] Web: www.pada.it EasyClick