10/08 PADA ENGINEERING S.r.l. Via G.B. Pirelli 11 I – 61030 Saltara (PU) - Italy Tel. +39 0721 899555 Fax +39 0721 897064 Email: [email protected] Web: www.pada.it SuperPlate SuperPlate: an efficient way to manage complex electronic systems having high concentrated power. Water cooling is becoming more and more the solution to dissipate the high power of last generation power (IGBTs) modules: Pada is on your side with more than 10 years experience. SuperPlate can be manufactured with copper tubes, stainless steel tubes or drilled through holes: SuperPlate contact us to find together the solution “tailored” to your needs. 1 2 06 SuperPlate 08 Tubes Technology 14 Through Holes Technology 17 Milled Channels Technology 18 Thermal Analysis SuperPlate Contents 3 SuperPlate 4 SuperPlate 5 SuperPlate Our forced water cooling system SuperPlate allows to manage complex electronic systems having concentrated power in an efficient and cost - effective way. Among the advantages of our SuperPlate the most remarkable one is the possibility of separating the area where power is generated, which is generally narrow, from the dissipation area. Furthermore, this system allows to avoid noise and problems due to vibration. SuperPlate can be easily assembled in a typical cooling system consisting of the following: one pump, one expansion tank, one heat exchanger and, of course, SuperPlate. Forced liquid cooler system Q in Electronic equipment Heat exchanger Q out Pump Expansion and storage tank 6 SuperPlate Usage diagram SuperPlate Our water cooled plates can dissipate high power on surfaces of limited area. The plate can be used mounting the components on both sides of the plate itself. The thermal performances of the heat sinks will be used at their best if the components are mounted on the tube side of the plate. SuperPlate can be divided into three groups: - Plates with tubes tecnology - Plates with through holes technology - Plates with milled channels technology The plates with tubes technology can be realized using tubes made of: - Copper - Stainless Steel On the other hand, through holes can be: - Drilled by means of special CNC machines - Extruded. Electronic device High conductive epoxy resin Copper tube SuperPlate Aluminium plate 7 Tubes Technology Herebelow some simple plate layouts and thermal results. Two pipes SuperPlate 450x120x25 mm 10 mm Copper Tube Connectors Thermal results Power modules mounted on 1 side 2 sides Waterflow Q 8 L/min 8 L/min Power dissipation Pd 2000 W 2000 W Tin water Ti 16°C 16°C Tout water Tu 19,6°C 19,6°C Tsurface max Ts 35,6°C 35,2°C Thermal resistance Rth 0,0098 0,0096 Plate thickness: 25 mm Four pipes SuperPlate 305x135x15 mm 10 mm Copper Tube Thermal results Power modules mounted on 1 side 2 sides Waterflow Q 8 L/min 8 L/min Power dissipation Pd 2500 W 2500 W Tin water Ti 16°C 16°C Tout water Tu 20,5°C 20,5°C Tsurface max Ts 34,5°C 34,5°C Thermal resistance Rth 0,0074 0,0066 8 SuperPlate Plate thickness: 15 mm Tubes Technology Copper/Stainless Steel tube technology consists of: - One plate, usually of aluminium. - One canalization system, with copper or stainless steel pipes, suitably bent and equipped with connectors. The realization process of a water cooled plate consists of the following steps: - Milling of the groove on the Aluminium Plate; - Copper/Stainless Steel Tube bending; - Tube insertion (pressing) in the special groove of the plate; - Special resin application to eliminate possible thermal/mechanical discontinuities; - Resin hardening; - Final Plate surface milling (of both aluminium and tube). SuperPlate is normally used with water (glycol addition if necessary) as cooling fluid. The system is normally tested at a pressure of 10 bar. All the bearing surfaces of the components, side with holes, are suitably milled to obtain ideal flatness (0.01/150 mm) and roughness values (Ra = 1.2 μm). SuperPlate, available in several dimensions and configurations, according to Customers’ specific design, can be also manufactured with special terminals on the pipes and welded assembling flanges. The stainless steel tubes technology, developed together with some of our major customers, is well suitable for food industry applications or where the cooling water flows on an open circuit. This application, even if steel is less conductive than copper, guarantees best resistance against corrosion. Pipes are made of copper/stainless steel, with outside diameter of 10 mm and thickness of 1 mm. Plates used for assembling are made of aluminium, their thickness is between 12 mm and 30 mm. We are able to develop customized solutions upon Customer’s specific request. SuperPlate GAS connectors can be brazewelded at the 10 mm pipes ends. 9 10 SuperPlate Tubes Technology SuperPlate Tubes Technology 11 12 SuperPlate Tubes Technology SuperPlate Tubes Technology 13 Through Holes Technology Besides the technology already described with copper or steel tubes, we develop SuperPlate where the cooling medium flows through deep holes. The heatsink is entirely made of aluminium and the cooling water flows through a circuit consisting in holes drilled in the plate. If this technology can be adopted, we would suggest to put a mechanical filtration unit to protect the moving parts from damages caused by possible residual burrs due to the drilling process. Through holes technology has to be used if components under voltage are mounted on the plate. Using this technology both water cooled plate sides will have equivalent thermal features. Through Holes SuperPlate 150x150x20 mm Thermal results Power modules mounted on 1 side 2 sides Waterflow Q 10 L/min 10 L/min Power dissipation Pd 2500 W 2500 W Tin water Ti 16°C 16°C Tout water Tu 19,2°C 19,6°C Tsurface max Ts 54°C 47°C Thermal resistance Rth 0,0150 0,0120 Plate thickness: 20 mm Through Holes SuperPlate 190x140x25 mm Thermal results Power modules mounted on 1 side 2 sides Waterflow Q 10 L/min 10 L/min Power dissipation Pd 1800 W 1800 W Tin water Ti 16°C 16°C Tout water Tu 19,2°C 19,2°C Tsurface max Ts 36°C 33°C Thermal resistance Rth 0,0110 0,0094 14 SuperPlate Plate thickness: 25 mm SuperPlate Through Holes Technology 15 16 SuperPlate Through Holes Technology Milled Channels Technology Plate with milled channels and welded cover. New developed system to improve the temperature distribution on the plate under the power modules. Channel layout to enhance the creation of a turbolent waterflow (better thermal conductivity). SuperPlate Available in aluminium and copper. 17 Thermal Analysis Herebelow some SuperPlate thermal simulations carried out by Flotherm Software. 145x25/280mm with copper tubes (D=10mm).Cooling medium = 100% Water. Total power loss Pd = 1500 W T amb. = 30 °C Water Flow: Q = 9 L/min Tw = 20 °C Maximum temperature on the cold plate: Ts = 40°C 145x25/280mm with copper tubes (D=10mm). Cooling medium = 100% Water. 18 SuperPlate Total power loss Pd = 1000 W T amb. = 35 °C Water Flow: Q = 6 L/min Tw = 40 °C Maximum temperature on the cold plate: Ts = 66°C SuperPlate Notes 19 20 SuperPlate Notes 10/08 PADA ENGINEERING S.r.l. Via G.B. Pirelli 11 I – 61030 Saltara (PU) - Italy Tel. +39 0721 899555 Fax +39 0721 897064 Email: [email protected] Web: www.pada.it SuperPlate