Motor driver ICs PNP transistor array BA6254FS The BA6254FS has been developed as a low-saturation output, upper-side transistor array for low-voltage motor drive applications. The three PNP transistors have a common emitter. Applications Motor drivers Features 1) Output on resistance is low (0.4Ω Max.). 2) Three PNP transistors with common emitter. Absolute maximum ratings (Ta = 25C) 809 Motor driver ICs Block diagram Pin descriptions 810 BA6254FS Motor driver ICs BA6254FS Electrical characteristics (unless otherwise noted, Ta = 25C) Operation notes Observe the following points when using this IC. (1) Package power dissipation The power dissipated by the IC varies widely with the applied voltage and output current. Give full consideration to the package power dissipation rating when setting the supply voltage and the output current. (2) A.S.O. Make sure that the output current and supply voltage do not exceed the A.S.O. values. (3) Great care has been paid to the quality of this component. However, if the absolute maximum ratings for temperature, applied voltage, or power dissipation are exceeded, the IC may be destroyed. If the IC is destroyed, it is not possible to predict whether it will be in short mode or open mode, so if there is a chance that the maximum ratings of the IC will be exceeded, use appropriate physical protective measures (fuses etc.). Electrical characteristics curves 811 Motor driver ICs External dimensions (Units: mm) 812 BA6254FS