Wire-wound Chip Inductors - Open CT0603HCF Series From 1.6 nH to 26 nH www.ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CT0603HCF-1N6_ G = ±2%, J = ±5%, K = ±10% * = J or K only L Test Q Q Test SRF Part Inductance Freq. Fact. Freq. Min. Number (nH) (MHz) Min. (MHz) (MHz) DCR Max. (W) IDC Max. (mA) CT0603HCF-1N6_* CT0603HCF-3N6_* CT0603HCF-3N9_* CT0603HCF-6N8_* CT0603HCF-7N5_* 1.6 3.6 3.9 6.8 7.5 250 250 250 250 250 24 24 25 35 35 250 250 250 250 250 12500 5900 5900 5800 3700 .030 .048 .054 .054 .059 2400 2300 2200 2100 2100 CT0603HCF-100_ CT0603HCF-120_ CT0603HCF-150_ CT0603HCF-180_ CT0603HCF-220_ CT0603HCF-240_ 10 12 15 18 22 24 250 250 250 250 250 250 38 38 38 40 42 42 250 250 250 250 250 250 3700 3000 2800 2800 2400 2400 .071 .075 .080 .099 .099 .105 2000 2000 1900 1900 1800 1800 PHYSICAL DIMENSIONS Size A Max. mm inches B Max. C D Max. E F G H 1.80 1.12 1.02 0.76 0.33 0.86 0.38 1.00 0.071 0.044 0.040 0.030 0.013 0.034 0.015 0.039 Not Shown at Actual Size CHARACTERISTICS Description: SMD ceramic core wire-wound chip inductor high current. Applications: Telecommunication equipment, mobile phones, small size pagers, computers, printers and relevant equipment. Also, audio & video applications and the automotive electronics industry. High frequency applications. Operating Temperature: -40°C to +125°C Inductance Tolerance: ±2%, ±5%, ±10% Testing: Inductance and Q are tested on an HP4287A at specified frequency. Packaging: Tape & Reel. Miscellaneous: RoHS Compliant. Marking: Reels are marked with inductance code and tolerance. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. PAD LAYOUT Unit: mm (inch) Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 06.11.12