MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS QFN48 CASE 485K−02 ISSUE C DATE 20 JUL 2004 1 48 NOTES: 1. DIMENSIONS AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS IN MILLIMETERS. 3. DIMENSION b APPLIES TO THE PLATED TERMINAL AND IS MEASURED ABETWEEN 0.25 AND 0.30 MM FROM TERMINAL 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. SCALE 2:1 ÈÈÈ ÈÈÈ ÈÈÈ D PIN 1 LOCATION A B E 2X 0.15 C 2X 0.15 C TOP VIEW GENERIC MARKING DIAGRAM* (A3) 0.10 C 48 A 48 X 0.08 C 1 SIDE VIEW A1 C 13 K 24 4X 12 25 E2 1 b 48 48 X NOTE 3 XXXXXXXXX XXXXXXXXX AWLYYWW SEATING PLANE EXPOSED PAD D2 L 48 X MILLIMETERS MIN NOM MAX 0.800 0.900 1.000 0.000 0.025 0.050 0.200 REF 0.180 0.250 0.300 7.000 BSC 5.260 5.360 5.460 7.000 BSC 5.260 5.360 5.460 0.500 BSC 0.200 −−−− −−−− 0.300 0.400 0.500 DIM A A1 A3 b D D2 E E2 e K L 36 A WL YY WW = Assembly Location = Wafer Lot = Year = Work Week *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ ”, may or may not be present. 37 e 0.10 C A B 0.05 C DOCUMENT NUMBER: BOTTOM VIEW 98AON11526D Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed STATUS: ON SEMICONDUCTOR STANDARD versions are uncontrolled except when stamped “CONTROLLED COPY” in red. NEW STANDARD: Semiconductor Components Industries, LLC, 2002 Case Outline Number: http://onsemi.com 48 PIN QFN, 7X7 MM 0.50 MM PITCH DESCRIPTION: October, 2002 − Rev. 0 PAGE 1 OFXXX 2 1 DOCUMENT NUMBER: 98AON11526D PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. S. MOHAMMED. 29 APR 2002 A CHANGED PROFILE TOL. AT SEATING PLANE WAS 0.08 (0.031). REQ. S. MOHAMMED. 29 MAR 2002 B MOVE DIMENSION LINES FOR “F” DIMENSION. CHANGED DIM “E” AND “F” WAS 5.70 (0.224) , 5.90 (0.232).ADDED DIM “P”. ADDED EXPOSED PAD NOTE. CHANGED NOTE 3. REQ. BY S. MOHAMMED. 12 MAR 2003 C CONVERTED TO ASME FORMAT. REQ. BY P. CELAYA 20 JUL 2004 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Semiconductor Components Industries, LLC, 2004 July, 2004 − Rev. 02C Case Outline Number: 485K