Revision - ON Semiconductor

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOT−883 (XDFN3), 1.0x0.6, 0.35P
CASE 506CB
ISSUE A
DATE 30 MAR 2012
SCALE 8:1
PIN ONE
REFERENCE
0.10 C
ÏÏ
ÏÏ
0.10 C
E
DIM
A
A1
b
D
D2
e
E
E2
L
TOP VIEW
NOTE 3
A
0.10 C
0.10 C
3X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. EXPOSED COPPER ALLOWED AS SHOWN.
A B
D
A1
SIDE VIEW
C
SEATING
PLANE
E2
1
e
0.10
M
b
C A B
0.05
M
C
3X
2X
GENERIC
MARKING DIAGRAM*
XX M
D2
e/2
MILLIMETERS
MIN
MAX
0.340 0.440
0.000 0.030
0.075 0.200
0.950 1.075
0.620 BSC
0.350 BSC
0.550 0.675
0.425 0.550
0.170 0.300
XX = Specific Device Code
M = Date Code
*This information is generic. Please refer
to device data sheet for actual part
marking. Pb−Free indicator, “G”, may
or not be present.
L
BOTTOM VIEW
RECOMMENDED
SOLDER FOOTPRINT*
1.10
2X
2X
0.43
1
0.20
0.41
0.55
PACKAGE
OUTLINE
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
98AON65407E
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
STATUS: ON SEMICONDUCTOR STANDARD
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
NEW STANDARD:
© Semiconductor Components Industries, LLC, 2002
Case Outline Number:
http://onsemi.com
SOT−883 (XDFN3), 1.0X0.6, 0.35P
DESCRIPTION:
October, 2002
− Rev. 0
PAGE 1 OFXXX
2
1
DOCUMENT NUMBER:
98AON65407E
PAGE 2 OF 2
ISSUE
REVISION
DATE
O
RELEASED FOR PRODUCTION. REQ. BY I. CAMBALIZA.
17 NOV 2011
A
CHANGED DESCRIPTION TO SOT−883 (XDFN3) AND CORRECTED MARKING
DIAGRAM AND DIMENSION D2. REQ. BY I. CAMBALIZA.
30 MAR 2012
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any
liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over
time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under
its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© Semiconductor Components Industries, LLC, 2012
March, 2012 − Rev. A
Case Outline Number:
506CB