MUR1100E

MUR1100E
ULTRAFAST RECTIFIERS
PRV : 1000 Volts
Io : 1.0 Amperes
DO - 41
FEATURES :
0.107 (2.7)
0.080 (2.0)
* Ultrafast 75 Nanoescond Recovery Time
1.00 (25.4)
MIN.
* High Temperature
0.205 (5.2)
0.166 (4.2)
* Low Forward Voltage
* Low Leakage Current
* Pb / RoHS Free
0.034 (0.86)
0.028 (0.71)
MECHANICAL DATA
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.339 gram
1.00 (25.4)
MIN.
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL
VALUE
UNIT
Maximum Repetitive Peak Reverse Voltage
VRRM
1000
V
Maximum Working Reverse Voltage
VRWM
1000
V
Maximum DC Blocking Voltage
VDC
1000
V
Maximum Average Forward Current
IF(AV)
1.0 @ TA = 95 ºC
A
Maximum Non-repetitive Peak Forward Surge Current
IFSM
35
A
VF
1.75
V
Maximum Instantaneous Forward Voltage at IF = 1 Amp. (Note 1)
IR
10 ( TJ = 25 °C )
µA
Rated DC Blocking Voltage
IR(H)
600 ( TJ = 100 °C )
µA
Maximum Reverse Recovery Time ( Note 2 )
Trr
75
ns
Junction Temperature Range
TJ
- 65 to + 175
°C
Storage Temperature Range
TSTG
- 65 to + 175
°C
Maximum Instantaneous Reverse Current at
Notes :
(1) Pulse Test : Pulse Width = 300 µs, Duty Cycle ≤ 2.0%
(2) Reverse Recovery Test Conditions : IF = 0.5A, IR = 1A ; Irr = 0.25 A
Page 1 of 2
Rev. 01 : September 1, 2005
RATING AND CHARACTERISTIC CURVES ( MUR1100E )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
Trr
10 Ω
+ 0.5
D.U.T.
0
PULSE
GENERATOR
( NOTE 2 )
+
50 Vdc
(approx)
1Ω
- 0.25
OSCILLOSCOPE
( NOTE 1 )
- 1.0 A
SET TIME BASE FOR 15 ns/cm
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
1 cm
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
FIG. 2 - DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
1.25
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
RATED VR
RөJA = 50 ºC/W
1.0
0.75
SQUARE WAVE
0.5
0.25
PEAK FORWARD SURGE CURRENT,
AMPERES
3. All Resistors = Non-inductive Types.
FIG. 3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
50
40
30
20
10
8.3ms SINGLE HALF SINE-WAVE
0
0
0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE, ( °C)
1
2
4
6
10
20
40
60
100
NUMBER OF CYCLES AT 60Hz
FIG. 4 - TYPICAL FORWARD CHARACTERISTICS
FORWARD CURRENT, AMPERES
10
TJ = 25 °C
1
Pulse Width = 300 µs
2% Duty Cycle
0.1
0.01
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
FORWARD VOLTAGE, VOLTS
Page 2 of 2
Rev. 01 : September 1, 2005