www.eicsemi.com EG1A ULTRA FAST RECOVERY RECTIFIER DIODE PRV : 600 Volts Io : 0.6 Ampere DO - 41 FEATURES : * * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free 1.00 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) 0.205 (5.2) 0.166 (4.2) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.339 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Peak Reverse Voltage VRM 600 V Maximum Peak Reverse Surge Voltage VRSM 600 V Maximum Average Rectified Forward Current IF(AV) 0.6 A IFSM 10 A Maximum Forward Voltage at IF = 0.6 A VF 2.0 V Maximum Reverse Current at VR = VRM , Ta = 25°C IR 0.1 mA Maximum Reverse Current at VR = VRM , Ta = 100°C IR(H) 0.5 mA Maximum Reverse Recovery Time ( Note 1 ) Trr 100 ns Junction Temperature Range TJ - 40 to + 150 °C Storage Temperature Range TSTG - 40 to + 150 °C Maximum Peak Forward Surge Current ( 50 Hz, Half-cycle, Sine wave, Single Shot ) Note: (1) Reverse Recovery Test Conditions : IF = 100 mA, IRP = 100 mA. Page 1 of 2 Rev. 02 : March 25, 2005 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( EG1A ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 100 µF specimen 100 mA IF 100 mA IRP 10 Ω 20µS 0.1 IRP 200µS Trr NOTE : IF = IRP = 100 mA TO 10 mA FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 10 0.10 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 8 6 4 2 0 175 1 AMBIENT TEMPERATURE, ( °C) FIG.4 - TYPICAL FORWARD CHARACTERISTICS 4 6 10 20 40 60 100 FIG.5 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 FORWARD CURRENT, AMPERES 2 NUMBER OF CYCLES AT 50Hz 1.0 Ta = 25 °C 0.1 0.01 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.001 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005