www.eicsemi.com GN2S GLASS PASSIVATED JUNCTION SILICON SURFACE MOUNT PRV : 700 Volts Io : 1.25 Amperes SMB (DO-214AA) Glass passivated chip High current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.14 ± 0.38 4.65 ± 0.30 * * * * * * 5.30 ± 0.22 FEATURES : 0.1 ± 0.1 0.22 ± 0.07 2.1 ± 0.15 2.28 ± 0.15 3.62 ± 0.32 MECHANICAL DATA : * Case : SMB Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.1079 gram Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Repetitive Peak Reverse Voltage VRRM 700 V Maximum RMS Voltage VRMS 490 V Maximum DC Blocking Voltage VDC 700 V Minimum Average Output Forward Current Ta = 25 °C Tc = 55 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) IO 1.25 3.75 A IFSM 80 A Maximum Forward Voltage at IF = 2.0 A, Tc = 25 °C VF 1.0 V Maximum DC Reverse Current Ta = 25 °C IR 2.0 μA at rated DC Blocking Voltage Ta = 100 °C IR(H) 20 μA Typical Junction Capacitance (Note1) CJ 75 pF Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Note : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC Page 1 of 1 Rev. 01 : September 28, 2012