Certificate TH97/10561QM GR2S GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER PRV : 700 Volts Io : 1.125 Amperes SMB (DO-214AA) Glass passivated chip High current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free 1.1 ± 0.3 4.8 ± 0.15 5.4 ± 0.15 FEATURES : * * * * * * * Certificate TW00/17276EM 0.22 ± 0.07 2.0 ± 0.1 2.3 ± 0.2 3.6 ± 0.15 MECHANICAL DATA : Dimensions in millimeters * Case : SMB Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.1079 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% RATING SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 700 V Maximum RMS Voltage VRMS 490 V Maximum DC Blocking Voltage VDC 700 V Minimum Average Output Forward Current Ta = 25 °C Tc = 55 °C IO 1.125 3.500 A Peak Forward Surge Current, IFSM 70 A Maximum Peak Forward Voltage at I F = 2.0 A, Tc = 25 °C VF 1.1 V Maximum DC Reverse Current Ta = 25 °C IR 2 μA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 20 μA Maximum Reverse Recovery Time ( Note 1 ) Trr 500 ns Typical Junction Capacitance ( Note 2 ) CJ 15 pF Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C 8.3ms Single half sine wave superimposed on rated load (JEDEC Method) Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 1.0 A, IR = 1.0 A, Irr = 0.5 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC Page 1 of 1 Rev. 00 : December 15, 2006