www.eicsemi.com 5.0SMDJ12A - 170CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VR : 12 - 170 Volts SMC (DO-214AB) PPK : 5,000 Watts FEATURES : * Glass passivated junction chip * 5000W Peak Pulse Power * Excellent clamping capability * Low incremental surge resistance * Pb / RoHS Free 7.0 ± 0.20 8.0 ± 0.15 1.1 ± 0.3 0.1 ± 0.1 0.20± 0.07 3.0 ± 0.2 2.3 ± 0.2 5.8 ± 0.15 MECHANICAL DATA * * * * * Case : SMC Molded plastic Epoxy : UL94V-0 rate flame retardant Lead : Lead Formed for Surface Mount Mounting position : Any Weight : 0.21 gram Dimensions in millimeters MAXIMUM RATINGS (Ta = 25°C) Rating Peak Pulse Power Dissipation on 10/1000 µs waveform Symbol Value Unit PPPK 5000 W PD 6.5 W VF 5.0 V IFSM 300 A TJ, TSTG - 65 to + 150 °C (1) (2) Power Dissipation on infinite heat sink at Ta = 50°C Maximum Instantaneous Forward Voltage at 100 A for Unidirectional only Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load(Note 3) for Unidirectional only Operating and Storage Temperature Range Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. (3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 3 Rev. 02: October 8, 2012 www.eicsemi.com ELECTRICAL CHARACTERISTICS (Rating at 25°C ambient temperature unless otherwise specified) Part Number Part Number (Uni-directional) (Bi-directional) Reverse Stand Off Voltage VWM Breakdown Voltage @ IT IT Maximum Reverse Leakage @ VR IR (V) Min. Max. (mA) (μA) (A) (V) VBR (V) Maximum Peak Pulse Current IPPM Maximum Clamping Voltage @ IPP VC 5.0SMDJ12A 5.0SMDJ12CA 12 13.30 14.70 10.0 1000 252 19.9 5.0SMDJ13A 5.0SMDJ13CA 13 14.40 15.90 10.0 1000 233 21.5 5.0SMDJ14A 5.0SMDJ14CA 14 15.60 17.20 10.0 500 216 23.2 5.0SMDJ15A 5.0SMDJ15CA 15 16.70 18.50 1.0 200 205 24.4 5.0SMDJ16A 5.0SMDJ16CA 16 17.80 19.70 1.0 100 193 26.0 5.0SMDJ17A 5.0SMDJ17CA 17 18.90 20.90 1.0 50 181 27.6 5.0SMDJ18A 5.0SMDJ18CA 18 20.00 22.10 1.0 25 172 29.2 5.0SMDJ20A 5.0SMDJ20CA 20 22.20 24.50 1.0 10 155 32.4 5.0SMDJ22A 5.0SMDJ22CA 22 24.40 26.90 1.0 5 141 35.5 5.0SMDJ24A 5.0SMDJ24CA 24 26.70 29.50 1.0 5 129 38.9 5.0SMDJ26A 5.0SMDJ26CA 26 28.90 31.90 1.0 5 119 42.1 5.0SMDJ28A 5.0SMDJ28CA 28 31.10 34.40 1.0 5 110 45.4 5.0SMDJ30A 5.0SMDJ30CA 30 33.30 36.80 1.0 5 103 48.4 5.0SMDJ33A 5.0SMDJ33CA 33 36.70 40.60 1.0 5 93.9 53.3 5.0SMDJ36A 5.0SMDJ36CA 36 40.00 44.20 1.0 5 86.1 58.1 5.0SMDJ40A 5.0SMDJ40CA 40 44.40 49.10 1.0 5 77.6 64.5 5.0SMDJ43A 5.0SMDJ43CA 43 47.80 52.80 1.0 5 72.1 69.4 5.0SMDJ45A 5.0SMDJ45CA 45 50.00 55.30 1.0 5 68.8 72.7 5.0SMDJ48A 5.0SMDJ48CA 48 53.30 58.90 1.0 5 64.7 77.4 5.0SMDJ51A 5.0SMDJ51CA 51 56.70 62.70 1.0 5 60.7 82.4 5.0SMDJ54A 5.0SMDJ54CA 54 60.00 66.30 1.0 5 57.5 87.1 5.0SMDJ58A 5.0SMDJ58CA 58 64.40 71.20 1.0 5 53.5 94.0 5.0SMDJ60A 5.0SMDJ60CA 60 66.70 73.70 1.0 5 51.7 97.0 5.0SMDJ64A 5.0SMDJ64CA 64 71.10 78.60 1.0 5 48.6 103 5.0SMDJ70A 5.0SMDJ70CA 70 77.80 86.00 1.0 5 44.3 113 5.0SMDJ75A 5.0SMDJ75CA 75 83.30 92.10 1.0 5 41.4 121 5.0SMDJ78A 5.0SMDJ78CA 78 86.70 95.80 1.0 5 39.7 126 5.0SMDJ85A 5.0SMDJ85CA 85 94.40 104.00 1.0 5 36.5 137 5.0SMDJ90A 5.0SMDJ90CA 90 100.0 111.0 1.0 5 34.3 146 5.0SMDJ100A 5.0SMDJ100CA 100 111.0 123.0 1.0 5 30.9 162 5.0SMDJ110A 5.0SMDJ110CA 110 122.0 135.0 1.0 5 28.3 177 5.0SMDJ120A 5.0SMDJ120CA 120 133.0 147.0 1.0 5 26.0 194 5.0SMDJ130A 5.0SMDJ130CA 130 144.0 159.0 1.0 5 24.0 209 5.0SMDJ150A 5.0SMDJ150CA 150 167.0 184.0 1.0 5 20.6 238 5.0SMDJ160A 5.0SMDJ160CA 160 178.0 197.0 1.0 5 19.3 263 5.0SMDJ170A 5.0SMDJ170CA 170 189.0 209.0 1.0 5 18.2 275 Notes: (1) For Bi-directional devices having VR of 20 Volts and under the IR limit is doubled. (2) "SMDJ" will be omitted on marking of the diode. Page 2 of 3 Rev. 02: October 8, 2012 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( 5.0SMDJ12A - 170CA ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 120 300 PEAK FORWARD SURGE CURRENT, (A) PEAK PULSE POWER OR CURRENT DERATING IN PERCENTAGE, % FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 250 200 150 100 50 0 0 0 25 50 75 100 125 150 175 10 1 Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PEAK PULSE POWER RATING CURVE 1000 PPPK , PEAK POWER (kW) 8 PD, STEADY STATE POWER DISSIPATION, (W) 100 6 4 2 100 10 1.0 0.1μs 0 0 25 50 75 100 125 150 175 200 1.0μs 10μs 100μs 1.0ms 10ms tp, PULSE WIDTH TA, AMBIENT TEMPERATURE ( °C) tr = 10μs 100 Peak Value IPPM FIG.6 - TYPICAL JUNCTION CAPACITANCE Ta=25 °C Pulse Width (td) is defined as that point where the peak current decays to 50% of IPPM Half Value - IPPM 2 50 10x1000 μs Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 CJ, JUNCTION CAPACITANCE (pF) PEAK PULSE CURRENT - % IPPM FIG.5 - PULSE WAVEFORM T, TIME(ms) VBR, REVERSE BREAKDOWN VOLTAGE (V) Page 3 of 3 Rev. 02: October 8, 2012