www.eicsemi.com GR15-G-2 HIGH VOLTAGE FAST RECOVERY RECTIFIERS PRV : 1500 Volts Io : 0.5 Ampere DO-215AC FEATURES : 2.6 ± 0.2 4.3 ± 0.2 2.4 ± 0.2 * Glass passivated junction chip * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop 1.4 ± 0.2 6.2 ± 0.2 * Pb / RoHS Free Dimensions in millimeters MECHANICAL DATA : * Case : DO-215AC Molded plastic * Epoxy : UL94V-O rate flame retardant * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.060 gram (Approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL GR15-G-2 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 1500 V Maximum RMS Voltage VRMS 1050 V Maximum DC Blocking Voltage VDC 1500 V Maximum Average Forward Current IF(AV) 0.5 A IFSM 20 A Maximum Forward Voltage at IF = 0.1 A VF 2.0 V Maximum DC Reverse Current Ta = 25 °C IR 5.0 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA Maximum Reverse Recovery Time ( Note 1 ) Trr 300 ns Typical Junction Capacitance ( Note 2 ) CJ 5 pF Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Maximum Peak Forward Surge Current, 8.3ms Single half sine wave superimposed on rated load (JEDEC Method) Notes : (1) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC (3) Marking code “15G2” on diode Page 1 of 2 Rev. 01 : January 30, 2013 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( GR15-G-2 ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 W Trr 10 W + 0.5 A D.U.T. 0 + PULSE GENERATOR ( NOTE 2 ) 50 Vdc (approx) 1W - 0.25 A - 1.0 A OSCILLOSCOPE ( NOTE 1 ) SET TIME BASE FOR 50/100 ns/cm 1 cm NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 25 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD OUTPUT CURRENT, (A) 0.5 0.4 0.3 0.2 0.1 60Hz RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 8.3 ms SINGLE HALF SINE WAVE 20 Ta = 50 C 15 10 5 0 175 1 AMBIENT TEMPERATURE, ( °C) 6 10 20 40 60 100 FIG.5 - TYPICAL REVERSE CHARACTERISTICS 1.0 10 Pulse Width = 300 ms 2% Duty Cycle GR15-G-2 TJ = 100 C REVERSE CURRENT, (μA) FORWARD CURRENT, (A) 4 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS TJ = 25 C 0.1 0.01 1.0 0.1 TJ = 25 C 0.01 0.001 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 FORWARD VOLTAGE, (V) Page 2 of 2 2 2.4 2.6 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) Rev. 01 : January 30, 2013