D-Sub Connectors Straight DIP Type 17JE Series FEATURE ● DIP-type connector mounted directly on PCB. Contact tail is straight, allowing vertical mounting of connector on PCB. ● Number of contacts : 9, 15, 25 and 37 ● Press-fabricated contacts. Standard surface finishing of contacts : Connections Au-plated (0.4 μ m)on Ni-substrata, tails Sn-Ag plated. ● To fasten engagement with counterpart, an engaging block and a hexagon-head nut can be attached, allowing connection of PCB's and metal shell's grounding and improving resistance against EMI. SPECIFICATIONS Rated Voltage 300V AC (r.m.s.) Rated Current 5A / Contact Dielectric Withstanding Voltage 1,000V AC (r.m.s.) / 1 minute Insulation Resistance 1,000M Ω min. at 500V DC Contact Resistance 15m Ω max. Operating Temperature - 25℃〜+ 85℃ MATERIAL / FINISH Item Material / Finish Insulator Polyamide Resin (UL94V-0)/ Black Shell Steel / Ni Plating Contact Eyelet 120928 RoHS Compliant Compliant Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag Plating over Ni Plating Brass / Ni Plating ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 17JE (DIP) Series Unit:mm ○ Straight DIP Type Connectors 1 7 J E - 1 3 2 5 0 - 3 7 - FA FA: Lead Free Mating Style 1:Socket Connctor Contact Plating 7 : Contact Area: Au( 0.4 μ m ) over Ni Plating Shell Plating 3:Nickel Plating Tail Area: Sn-Ag over Ni Plating Contact Tail Style Number of Contact 3:Straight DIP Type 09: 9 Pin 15:15 Pin 25:25 Pin 37:37 Pin Key Position 0:No Key Type 3 (Rear Mounting) A B 12.50 4- R3.4 6.1 Panel Thickness : 0.8 〜 1.3 ● Connector can be fastened on the panel. 7.0 0.3 Panel Mounting Dimensions 1 G E 3.2 E D DDK n/2 n n/2+1 G 0.5 2.84 F F 0.1 0.1 n-φ1.0 0.1Dia. Hole 2-φ3.2 0.1 Dia. Hole 0.1 D B 0.1 0.1 PCB Mounting Dimensions 9.0 E 1.0 C 0.1 1 7.8 2.84 n/2+1 n/2 10 Contact No. 0.7 11.4 min. H min. n 2-φ3.1 Dia.Hole 2-φ3.2 0.1 Dia. Hole B (Applicable PCB Thickness:t =1.6±0.19) Contact No. ANGLE ∼ Part Name Number of Contact A B C D E F 17JE-13090-37-FA 9 30.8 24.99 18.99 10.98 2.74 17JE-13150-37-FA 15 39.1 33.32 27.32 19.20 17JE-13250-37-FA 25 53.0 47.04 41.04 33.12 17JE-13370-37-FA 37 69.3 63.50 57.50 49.68 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 TITLE MATERIAL FINISH 17JE−13xx0−3x−FA REV. DRAWING No. K-511364 (1/2) G H 8.22 1.37 20.5 2.74 16.44 1.37 28.8 2.76 30.36 1.38 42.5 2.76 46.92 1.38 59.1 B 17JE (DIP) Series Unit:mm ○ Straight DIP Type Connectors 1 7 J E - 1 3 2 5 0 - 3 7 ( D 2 3 x ) - FA Mating Style FA: Lead Free 1:Socket Connctor Deviation Shell Plating With Board Lock Pin,Square Nuts and Jack Socket Assembled and fixed with adhesive. Jack Socket internal thread size"M" (D23A) : M2.6x0.45 (D23B) : M3x0.5 (D23C) : #4-40UNC 3:Nickel Plating Number of Contact 09: 9 Pin 15:15 Pin 25:25 Pin 37:37 Pin Contact Plating Key Position 7 : Contact Area : Au( 0.4 μ m ) over Ni Plating Tail Area : Sn-Ag over Ni Plating 0:No Key Contact Tail Style 3:Straight DIP Type A Contact number Internal thread size M(See Page 4) +0.3 K0 L +0.3 7.8 10.0 0 Front Shell 13.1 3.2 PANEL CUT OUT DIMENSIONS (REAR MOUNTING) (REFERENCE) Contact Ref. Y B 0.5 2.84 Section Y-Y H 5.5 Dia. hole(Land) G F n-Ø1.0 0.1 Dia.hole 2- 3.2 0.1 Dia.hole (Plated throught hole) 0.1 0.1 E 9.0 F 0.1 E B (H) Ref. G Number of Contact A B 17JE-13090-37(D23x)-FA 9 30.80 17JE-13150-37(D23x)-FA 15 39.10 17JE-13250-37(D23x)-FA 25 17JE-13370-37(D23x)-FA 37 Part Number 0.1 0.1 P.C.BOARD DIMENSIONS (REFERENCE) ( APPLICABLE THICKNESS :1.6 0.19) ( CONNECTOR MOUNTING SIDE VIEW ) Contact number J 2.84 0.1 (F) Ref. 4.0 0.7 D (B) Insulator (0.3) 6.1 6.8 Y 1.0 4-R0.3 Max. 4-R2.5 12.5 C L2 0.3 0.3 C L1 6.75 B C D E F 24.99 16.30 18.99 10.98 33.32 24.64 27.32 19.20 53.00 47.04 38.35 41.04 33.12 69.30 63.50 54.80 57.50 49.68 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 G H 2.74 8.22 1.37 2.74 16.44 1.37 2.76 30.36 1.38 2.76 46.92 1.38 J K L 31.99 32.59 18.50 40.32 40.92 26.80 54.04 54.64 40.50 70.50 71.11 57.00 17JE (DIP) Series Unit:mm ○ Mounting on Panel and PCB Panel Mounting Dimensions Screw Spacer Stud Connector Type 1 Panel K min. Stud Connector 4-R1 ※ Connector can not be fastened on the panel. PCB Stud (17L-002 □ ) □ thread Nut Connector Jack Socket 6.1 Ground Tab (Board Lock) Spacer Type 2 L min. Nut M 0.3 4-R2.5 M3 6.5 +0.3 Panel 10 0 (L=6) 13 min. Screw 0.2 PCB 6.5 □ thread B 0.1 Jack Socket (17L-003 □ 1) ※ Connector can not be fastened on the panel. Square Nut PCB Thickness:t =1.6 0.19 Type 3 □ thread Nut Connector Nut Spacer Ground Tab (Board Lock) H min. M3 4-R2.5 11.4 min. 4.8 2−φ3.2 0.1 Dia.Hole B 0.1 Jack Socket 7.8 Rear Mounting 10 Jack Socket (17L-003 □ 3) Square Nut ※ Connector can be fastened on the panel. (Panel Thickness : 0.8 〜 1.3) 3.6 φ3.3 Spacer (57D-149-6A) □ Thread Size A:M2.6×0.45(Standard) B:M3×0.5 C:#4-40UNC Number of Contact 09 B H K L M 24.99 20.5 34.09 31.0 18.5 15 33.32 28.8 42.42 39.3 26.8 25 47.04 42.5 56.14 53.2 40.7 37 63.50 59.1 72.60 69.5 57.0 Note: We do not provide pan-head screws and nuts for fixing the accessories. Please prepare them at your side. ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4