High Density D-Subminiature Connector 17AE Series FEATURE ・ Right angle D-Sub connectors with SMT and DIP solder termination style. ・ Compatible to standard D-Sub connectors. ・ High temperature resin for reflow soldering process. ・ 2mm shorter than standard D-Sub connector's hight. ・ Screw and board lock mounting. SPECIFICATIONS Rated Voltage 300V AC(r.m.s.) Rated Current 3A / contact Dielectric Withstanding Voltage 1000V AC(r.m.s.) / 1 minute Insulation Resistance 1000M Ω (min.) at 500V DC Contact Resistance 20m Ω (max.) Operating Temperature -65℃∼ 125℃ RoHS MATERIAL / FINISH Compliant Compliant ITEM MATERIAL / FINISH Insulator PPS Resin / (UL94V-0) / Black Shell Steel / Ni Plating Contact Ground Tab Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating Copper Alloy / Sn-Ag Plating ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 090702 http://www.ddknet.co.jp 17AE Series Unit：mm ○ DIP Mounting Style without Jack Socket 1 7 AE -2 3 0 9 0 A-17E 4-FA FA: Lead Free Mating Style 1：Receptacle 2： Plug Ground Tab and Applicable PCB Sign Type PCB Thickness E4 Board Lock t ＝ 1.6 - 0.15 E5 Board Lock t ＝ 1.2 0.19 E6 Board Lock t ＝ 1.0 0.18 50 Tapping Groundd Tab Number of Contact 09, 15, 25 (Receptacle Only) Tail Cover A : without Cover B : with Cover(Plug) +0.25 - Contat Plating 7： Contact Area : Au(0.4 μ m) over Ni Plating Tail Area : Sn-Ag over Ni Plating 8： Contact Area : Au(Flash) over Ni Plaing Tail Area : Sn-Ag over Ni Plating ○ DIP Mounting Style with Jack Socket 1 7 AE -1 3 0 9 0 A-17E 4 HA2 -C A CA： Lead and Cadmium Free Jack Socket 1：Attached 2：Assembled Mating Style 1： Receptacle 2： Plug Thread Type A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC Number of Contact 09, 15, 25 (Receptacle Only) Jack Socket Part Number H： P/N:17L-003 □ 26-CF (Panel Thickness : 0.9 ∼ 1.3mm) K： P/N:17L-003 □ 32-CF (Panel Thickness : 0.5 ∼ 0.8mm) Tail Cover A： without Cover B： with Cover(Plug) Contat Plating 7： Contact Area : Au(0.4 μ m) over Nickel Plating Tail Area : Sn-Ag over Ni Plating 8： Contact Area : Au(Flash) over Ni Plaing Tail Area : Sn-Ag over Ni Plating Ground Tab and Applicable PCB Sign Type PCB Thickness E4 Board Lock t ＝ 1.6 - 0.15 E5 Board Lock t ＝ 1.2 0.19 E6 Board Lock t ＝ 1.0 0.18 50 Tapping Groundd Tab ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 +0.25 - 17AE Series Unit：mm ○ DIP Mounting Style Receptacle Connector A Number of B Contact C D B C D E 9 30.8 24.99 10.98 1.373 15.98 15 39.1 33.32 19.20 1.371 24.20 25 53.0 47.04 33.12 1.380 38.12 5.6 Thread Ｍ３ 0.5 A 4.5 0.5 A 1.6 Y Applicable PCB Mark 0.2 DDK 8.5 0.5 4 6 7 6.1 0.5 Y (2.5) 4.0 Shell：φ3.1 hole Tapping Ground Tab：Thread Ｍ３ ０． ５ 7.7 0.5 12 0.4 A （PCB Surface） 10.5 4.5 L Ｙ−Ｙ Section Board Lock Ground Tab Type (17AE-13 □□ 0A-1 □ E □ -FA) 3.0 1 （PCB Surface） φ1.5 E Tapping Ground Tab Type (17AE-13 □□ 0A-1 □ 50-FA) PCB Part Number L Mark 17AE-13 □□ 0A-1 □ E4-FA 3.2 A 17AE-13 □□ 0A-1 □ E5-FA 2.8 B t ＝ 1.2 17AE-13 □□ 0A-1 □ E6-FA 2.6 C t ＝ 1.0 Thickness t ＝ 1.6 ○ DIP Mounting Style Plug Connector Number of A A B C D E 30.8 24.99 10.98 1.373 15.98 Contact B C 9 D 0.4 ９ 4.0 12 7.7 0.5 ６ １ ５ Shell ：φ 3.1 hole Tapping Ground Tab：Thread Ｍ３ 0.5 A 4.5 0.5 A 8.5 0.5 5.9 X L 1.6 0.5 (PCB Surface) 0.2 7.0 6.0 4.0 B (2.5) Applicable PCB Mark X Ｘ−Ｘ Section Board Lock Ground Tab Type (17AE-23 □□ 0A-1 □ E □ -FA) 1 10.5 4.5 Thread Ｍ３ 0.5 φ1.5 E 3.0 （PCB Surface） Tapping Ground Tab Type (17AE-23 □□ 0A-1 □ 50-FA) PCB Part Number L Mark 17AE-23 □□ 0A-1 □ E4-FA 3.2 A Thickness t ＝ 1.6 17AE-23 □□ 0A-1 □ E5-FA 2.8 B t ＝ 1.2 17AE-23 □□ 0A-1 □ E6-FA 2.6 C t ＝ 1.0 ※ Tail cover is common to SMT style plug connector. Part Number : 17AE-09A-700 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 17AE Series Unit：mm ○ SMT Mounting Style without Jack Socket 1 7 AE -2 3 0 9 0 A-9 7E 1-FA FA： Lead Free Mating Style 1： Receptacle 2： Plug Ground Tab and Applicable PCB Number of Contact 09, 15, 25 (Receptacle Only) Tail Cover A： without Cover B： with Cover(Plug) Sign Type E1 Board Lock (Single Tine) PCB Thickness t ＝ 1.6 E2 Board Lock (Single Tine) t ＝ 1.2 0.19 E3 Board Lock (Single Tine) t ＝ 1.0 0.18 E7 Board Lock t ＝ 1.6 - 0.15 E8 Board Lock t ＝ 1.2 0.19 E9 Board Lock t ＝ 1.0 0.18 50 Tapping Ground Tab +0.25 - 0.15 +0.25 - Contat Plating 7： Contact Area : Au(0.4 μ m) over Ni Plating Tail Area : Sn-Ag over Ni Plating 8： Contact Area : Au(Flash) over Ni Plaing Tail Area : Sn-Ag over Ni Plating ○ SMT Mounting Style with Jack Socket 1 7 AE -1 3 0 9 0 A-9 7E 1 HA2 -C A CA： Lead and Cadmium Free Jack Socket 1：Attached 2：Assembled Mating Style 1： Receptacle 2： Plug Thread Type A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC Number of Contact 09, 15, 25 (Receptacle Only) Jack Socket Part Number H： P/N:17L-003 □ 26-CF (Panel Thickness : 0.9 ∼ 1.3mm) K： P/N:17L-003 □ 32-CF (Panel Thickness : 0.5 ∼ 0.8mm) Tail Cover A： without Cover B： with Cover(Plug) Ground Tab and Applicable PCB Contat Plating 7： Contact Area : Au(0.4 μ m) over Ni Plating Tail Area : Sn-Ag over Ni Plating 8： Contact Area : Au(Flash) over Ni Plaing Tail Area : Sn-Ag over Ni Plating Sign Type E1 Board Lock (Single Tine) t ＝ 1.6 E2 Board Lock (Single Tine) t ＝ 1.2 0.19 E3 Board Lock (Single Tine) t ＝ 1.0 0.18 E7 Board Lock t ＝ 1.6 - 0.15 E8 Board Lock t ＝ 1.2 0.19 E9 Board Lock t ＝ 1.0 0.18 50 Tapping Ground Tab ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 PCB Thickness +0.25 - 0.15 +0.25 - 17AE Series Unit：mm ○ SMT Mounting Style Receptacle Connector A B C Number of D 12 Contact A B C D E 9 30.8 24.99 10.98 1.373 15.98 15 39.1 33.32 19.20 1.371 24.20 25 53.0 47.04 33.12 1.380 38.12 Y Thread Ｍ３ 0.5 5.6 10.5 （PCB Surface） 1 0.3 3.5 0.5 0.4 8.5 0.5 4 6 7 6.1 0.5 (2.5) Y 4.5 Shell ：φ3.1 hole Tapping Ground Tab：Thread Ｍ３ ０． ５ φ1.5 E Ｙ−Ｙ Section Tapping Ground Tab Type (17AE-13 □□ 0A-9 □ 50-FA) A A 4.5 A Double-tine Board Lock 4.5 Single-tine Board Lock Applicable PCB Mark A （PCB Surface） L L （PCB Surface） Single-tine Board Lock Ground Tab Type (17AE-13 □□ 0A-9 □ E □ -FA) Board Lock Ground Tab Type (17AE-13 □□ 0A-9 □ E □ -FA) Part Number L Mark PCB Thickness Part Number L Mark PCB Thickness 17AE-13 □□ 0A-9 □ E7-FA 4.0 A t ＝ 1.6 17AE-13 □□ 0A-9 □ E1-FA 4.0 A t ＝ 1.6 17AE-13 □□ 0A-9 □ E8-FA 3.6 B t ＝ 1.2 17AE-13 □□ 0A-9 □ E2-FA 3.6 B t ＝ 1.2 17AE-13 □□ 0A-9 □ E9-FA 3.4 C t ＝ 1.0 17AE-13 □□ 0A-9 □ E3-FA 3.4 C t ＝ 1.0 ※ Insert the single lock pin first, and double lock pin next. It requires about a half insertion force to mount the connector on the PCB. PCB ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 17AE Series Unit：mm ○ SMT Mounting Style Plug Connector A B C D Number of Contact A B C D 9 30.8 24.99 10.98 1.373 ９ 12 ６ １ ５ Shell ：φ 3.1 hole Tapping Ground Tab：Thread Ｍ３ 0.5 0.5 5.9 X 24.99 1 4.5 10.5 Ｘ−Ｘ Section 3.5 0.5 7 4 6 0.3 Thread Ｍ３ 0.5 (2.5) X （PCB Surface） φ1.5 Tail Cover (17AE-09A-700) 15.98 With Tail Cover (17AE-23 □□ 0B-9 □□□ ) 6 0.5 4.0 Tapping Ground Tab Type (17AE-23 □□ 0A-9 □ 50-FA) A A 4.5 A 4.5 A Double-tine Board Lock Single-tine Board Lock Applicable PCB Mark （PCB Surface） L L （PCB Surface） Board LockGround Tab Style (17AE-23 □□ 0A-9 □ E □ -FA) Part Number L Mark 17AE-23 □□ 0A-9 □ E7-FA 4.0 17AE-23 □□ 0A-9 □ E8-FA 3.6 17AE-23 □□ 0A-9 □ E9-FA 3.4 Single-tine Board Lock Ground Tab Style (17AE-23 □□ 0A-9 □ E □ -FA) PCB Thickness Part Number L Mark PCB Thickness A t ＝ 1.6 17AE-23 □□ 0A-9 □ E1-FA 4.0 A t ＝ 1.6 B t ＝ 1.2 17AE-23 □□ 0A-9 □ E2-FA 3.6 B t ＝ 1.2 C t ＝ 1.0 17AE-23 □□ 0A-9 □ E3-FA 3.4 C t ＝ 1.0 ※ Insert the single lock pin first, and double lock pin next. It requires about a half insertion force to mount the connector on the PCB. PCB ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6 17AE Series Unit：mm ○ PCB Mounting Dimensions(Reference) ● SMT Mounting Style Tapping Ground Tab Style （17AE- □ 3 □□ OA-9 □ 50 □□□ - □□） 0.1 C 0.05 +0.1 0 φ1.55 0.05 hole (5) Land 0.1 4.0 2.0 G 0.05 0.1 E 1.0 2.5 D B Board Lock GroundTab Style （17AE- □ 3 □□ OA-9 □ E □□□□ - □□） (B) 6.5 φ3.2 0.05 Through Hole 2.5 0.05 D 0.05 G 0.1 E G 9 24.99 10.98 1.373 15.98 4.51 15 33.32 19.20 1.371 24.20 4.56 25 47.04 33.12 1.380 38.12 4.46 0.1 0.1 +0.1 0 0.05 φ1.55 hole Land 4.0 0.1 D 4.0 C 0.9 3.0 B 2.0 PCB Mounting Dimensions Number of Contact B E C 1.0 0.03 3.0 3.0 3.0 0.9 3.0 0.1 φ5.5 Land 0.03 φ3.2 0.05 Through Hole R2.8 Land ● DIP Mounting Style Board Lock Ground Tab Type （17AE- □ 3 □□ OA-1 □ E □□□□ - □□） Tapping Ground Tab Type （17AE- □ 3 □□ OA-1 □ 50 □□□ - □□） C 0.1 +0.1 0 φ1.55 0.05 hole Land 4.0 2.0 D 0.05 G 0.1 (5) 0.05 0.1 2.5 0.1 1.6 B E (B) 3.0 6.5 φ3.2 0.05 Through Hole B 0.1 E 0.1 C 0.05 +0.1 0 φ1.55 G C D E Tapping Type Board LockType 9 24.99 10.98 1.373 15.98 4.51 3.51 15 33.32 19.20 1.371 24.20 4.56 3.56 25 47.04 33.12 1.380 38.12 4.46 3.46 3.0 B 0.1 Number of Contact hole 1.6 2.0 φ0.8 0.08 Through Hole PCB Mounting Dimensions 2.5 0.05 D 0.05 G 0.1 0.1 3.0 0.1 φ5.5 Land φ5.5 Land φ3.2 0.05 Through Hole φ0.8 Jack Socket 0.08 Panel Cut-out Dimensions （Panel Mounting Type) B ● Jack Socket Material/Finish :Copper Alloy/Nickel Plating H : PCB Thickness 17L-003 □ 26-CF 4.8 0.9 ∼ 1.3 17L-003 □ 32-CF 5.3 0.5 ∼ 0.8 5 2-3.2 4-R3.4 10 Thread Ｍ3 0.5 Thead Number of Contact B F 9 24.99 20.5 15 33.32 28.8 25 47.04 42.5 H G □：Thread Size A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC 0.1 11.4(min.) G 10.3 G 5.8 Part Number 0.1 F(min.) Panel ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 7 hole