One-Touch Locking Style Small Sized Circular Connectors CM10 Series with-D Type ◆ OUTLINE CM10 series with -D has black trivalent chromium treatment and is a connector which is in compliance with RoHS directive. D type is a small sized waterproof circular connector with push on and turnoff unlocking mechanism. The plug will be easily locked with the receptacle when you push on. Rotating the coupling ring, the plug will be unlocked when you need to unmate. The plug can not be unmated from the receptacle by such an unexpected force like the cable being pulled. CM10 with -D has a solid construction with the metal shell. The weight of the connector is lighter with the light metal backshell and the resin clamp nut than the CM10 series connectors which we had released earlier. CM10 Wa t e r p r o o f IP 67 series with -D can be used with a wide range of applications since it is small size and waterproof connector. ◆ FEATURES 1. Solid structure with a metal shell 2. One touch and reliable locking mechanism of push on and turnoff Lock Type Push-On 3. With a grounding contact (Position 10) 4. Angle plug available for low-profile mounting 5. Finish : Black trivalent chromium treatment (RoHS compliant finish) ◆ SPECIFICATIONS 2 Contacts Item 10 Contacts Rated Current 3A Max. ／ Contact Rated Voltage 200V AC(r.m.s.) Max Dielectric Withstanding Voltage 1,500V AC(r.m.s.) ／ 1 minute Insulation Resistance Operating Temperature Range -25℃ to +85℃ Conductor Size ＃ 22 Protection Rate Applicable Wire IP67 when mated (Receptacle : Individually waterproof) Receptacle Receptacle ・Soldering only, 20AWG max. ・Soldering Use,：20AWG Max Plug Plug ・Crimp：16AWG-20AWG ・Crimp：20AWG-28AWG ・Soldering Use,：16AWG Max. ・Soldering Use,：20AWG Max. ◆ MATERIAL/FINISH Item 900V AC(r.m.s.) ／ 1 minute 1,000M Ω Min. at 500V DC RoHS Compliant Compliant Item Receptacle Plug Synthetic Rubber/Black Socket Cover Insulator Plastic(UL94V-0)/Black Pin Rear Insulator Plastic(UL94V-0)/Black Socket Insulator Plastic(UL94V-0)/Black Pin Contact Copper Alloy/Gold Plating Fixed Pin Copper Alloy/Nickel Plating O Ring(Mounting Side) Synthetic Rubber/Black Socket Contact Copper Alloy/Gold Plating Receptacle Shell Zinc Alloy/Trivalent Chromium Finish(Black） Coupling Ring Zinc Alloy/Trivalent Chromium Finish(Black） Retaining Ring Copper Alloy/Nickel Plating O Ring(Mating Side) Synthetic Rubber/Black Ground Lug Copper Alloy/Gold Plating Plug Shell Zinc Alloy/Trivalent Chromium Finish(Black） Spring Stainless Steel Backshell Aluminum Alloy/Trivalent Chromium Finish(Black) Bushing Synthetic Rubber/Black Cable Clamp Plastic(UL94V-0)/White Clamp Nut Plastic(UL94V-0)/Black Retaining Ring Stainless Steel Pin Front Insulator ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. 100929 http://www.ddknet.co.jp CM10 Series Unit：mm ○ 10-Contact Plug ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. Right Angle Plug 34 φ21 φ21 (φ21) Straight Plug (51.4) Straight Plug P/N Right Angle Plug P/N Cable Outside Dia. CM10-SP10S-S-D CM10-AP10S-S-D φ 4.0 ∼φ 6.0 CM10-SP10S-M-D CM10-AP10S-M-D φ 6.0 ∼φ 9.0 CM10-SP10S-L-D CM10-AP10S-L-D φ 9.0 ∼φ 11.6 (32.5) Note: The applicable cable outside diameter is in the case of cabtyre cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. ○ Contact of 10-Contact Plug Loose Piece Contact Applicable Wire Contact P/N (100 pcs in 1 bag ) Item Crimping Type Soldering Type Conductor Size Insulation Dia. Hand Tool P/N CM10-#22SC(C1)(D8)-100 20 ∼ 22AWG φ 1.10 ∼φ 1.87 357J-50446T CM10-#22SC(C2)(D8)-100 23 ∼ 28AWG φ 0.80 ∼φ 1.50 357J-50447T CM10-#22SC(C4)(D8)-100 22 ∼ 24AWG φ 0.95 ∼φ 1.69 357J-52667T CM10-#22SC(S1)(D8)-100 20 AWG Max. Extraction Tool P/N 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Applicable Wire The semi-automatic crimping machine is required when you terminate the reel contacts. Semi-Automatic Crimping Machine Contact P/N ( 5,000 pcs on 1 reel ) Conductor Size Insulation Dia. CM10-#22SC(C1)(D8)-5000 20 ∼ 22AWG φ 1.10 ∼φ 1.87 AP-A50539T AP-A50539T-1 CM10-#22SC(C2)(D8)-5000 23 ∼ 28AWG φ 0.80 ∼φ 1.50 AP-A50540T AP-A50540T-1 CM10-#22SC(C4)(D8)-5000 22 ∼ 24AWG φ 0.95 ∼φ 1.69 AP-A52666T AP-A52666T-1 1set P/N Extraction Tool P/N Applicator P/N 357J-50548T 1. Both of AP50539T and AP50540T are the set part numbers which include both of the semi-automatic crimping machines and the applicators (stripper crimpers). 2. Each of AP50539T and AP50540T contains exactly the same semi-automatic machine. Therefore if you change the applicator, you can terminate both of CM10-#22SC(C1)(D8)-5000 and CM10-#22SC(C2)(D8)-5000 by one semi-automatic crimping machine. CM10-#22SC(C1)(D8)- □□□□ CM10-#22SC(C2)(D8)- □□□□ CM10-#22SC(S1)(D8)- □□□□ 15.6 15.6 15.6 6 6 1.65 2.45 2.65 6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CM10 Series Unit：mm ○ 2-Contact Plug ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. Right Angle Plug １ ２ １ ２ 34 φ21 φ21 (φ21) Straight Plug (51.4) (32.5) Straight Plug P/N Right Angle Plug P/N Cable Outside Dia. φ 4.0 ∼φ 6.0 CM10-SP2S-S-D CM10-AP2S-S-D CM10-SP2S-M-D CM10-AP2S-M-D φ 6.0 ∼φ 9.0 CM10-SP2S-L-D CM10-AP2S-L-D φ 9.0 ∼φ 11.6 Note: The applicable cable outside diameter is in the case of cabtyre cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. ○ Contact of 2-Contact Plug Loose Piece Contact Item Contact P/N ( 100 pcs in 1 bag ) Crimping Type Soldering Type Applicable Wire Conductor Size Insulation Dia. CM10-#22SC(C3)(D8)-100 16 ∼ 20AWG φ 1.87 ∼φ 2.45 CM10-#22SC(S2)(D8)-100 16AWG Max. Hand Tool P/N Extraction Tool P/N 357J-50448T 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Applicable Wire Contact P/N ( 4,000 pcs on 1 reel ) CM10-#22SC(C3)(D8)-4000 The semi-automatic crimping machine is required when you terminate the reel contacts. Semi-Automatic Crimping Machine Conductor Size Insulation Dia. 1set P/N Applicator P/N 16 ∼ 20AWG φ 1.87 ∼φ 2.45 AP-A50541T AP-A50541T-1 Extraction Tool P/N 1. Due to the construction of CM10-#22SC(C3)(D8)-4000 you can only make the crimping process by AP50541T. So the process of striping cable shall be made in advance. 2. AP50541T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper). CM10-#22SC(S2)(D8)- □□□□ CM10-#22SC(C3)(D8)- □□□□ 15.6 15.6 6 4 φ2.1 6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 357J-50548T CM10 Series Unit：mm ○ Receptacle 10 Pins ・Pin contact style only ・Soldering termination only CM10-R10P-D（D7） ・Conductor Size : 20 AWG Max. ・Individually waterproof P/N Contact No.10 grounded to shell with ground lug (7.9) Main key positon mark 8 10 10 8 4 7 +0.25 0 1 +0.2 3 φ12 +0.1 7 φ16.2 3 φ12 1 4 φ15.3 5.2 DDK 8.4 □17.26 □17.26 P/N CM10-R2P-D（D7) 4-M3 1-0.1 3min. 2 Pins 0.1 0 (13.6) □23.4 4-φ3.2 ( ) 1.7 Mounting Dimensions ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof (7.9) Main key positon mark 2 2 +0.25 0 1 φ16.2 +0.2 φ12 φ15.3 1 φ12 +0.1 5.2 DDK 4-φ3.2 □23.4 （ ） 1.7 □17.26 8.4 (13.6) 0 □17.26 0.1 1-0.1 3min. Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 4-M3 CM10 Series Unit：mm ○ Mated Dimensions Receptacle ＋ Straight Plug Receptacle ＋ Right Angle Plug 23.4 φ21 (33.5) φ21 (44.3) (52) 23.4 ○ Dust Cap for Receptacle & Cable Receptacle P/N CM10-R-DC 7 φ20.7 Color : Red φ14.8 φ16.3 Material : Plastic DDK 2 7.9 ○ Supporting Cover Straight Plug Right Angle Plug P/N CM10-AP-D-CV 30 22.8 35.6 P/N CM10-SP-CV 32 40 (27) ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 45