One-Touch Locking Style Small Sized Circular Connectors CM10 Series (D6) Type ◆ OUTLINE CM10 series (D6) type is a small sized waterproof circular connector with push on locking and turnoff unlocking mechanism. The plug will be easily locked with the receptacle when you push on. Rotating the coupling ring, the plug will be unlocked when you need to unmate. The plug can not be unmated from the receptacle by such an unexpected force like the cable being pulled. CM10 with (D6) has a solid construction with the metal shell. The weight of the connector is lighter with the light metal backshell and the resin clamp nut than the CM10 series connectors which we had released earlier. CM10 series Wa t e r p r o o f IP 67 with (D6) can be used with a wide range of applications since it is small size and waterproof connector. ◆ FEATURES ◆ SPECIFICATIONS 1. Solid structure with a metal shell Lock Type Push-On 2. One touch and reliable locking mechanism of push on and turnoff 3. With a grounding contact (Position 10) 4. Angle plug available for low-profile Item 5. Lighter in weight by 30% than CM10 Rated Voltage Dielectric Withstanding Voltage 200V AC(r.m.s.) Max. 1500V AC(r.m.s.) ／ 1 minute Insulation Resistance -25℃ to +85℃ ＃ 22 Protection Rate IP67 when mated (Receptacle : Individually waterproof) Receptacle, Cable Receptacle RoHS ◆ MATERIAL/FINISH Plug Plug ・Crimp：16AWG-20AWG ・Crimp：20AWG-28AWG ・Soldering Use,：16AWG Max. ・Soldering Use,：20AWG Max. Compliant Compliant Item Receptacle Plug Pin Front Insulator Synthetic Rubber/Black Socket Cover Insulator Pin Rear Insulator Plastic(UL94V-0)/Black Socket Insulator Plastic(UL94V-0)/Black Pin Contact Copper Alloy/Gold Plating Fixed Pin Copper Alloy/Nickel Plating O Ring(Mounting Side) Synthetic Rubber/Black Socket Contact Copper Alloy/Gold Plating Receptacle Shell Zinc Alloy/Nickel Plating Coupling Ring Zinc Alloy/Nickel Plating Retaining Ring Copper Alloy/Gold Plating O Ring(Mating Side) Synthetic Rubber/Black Ground Lug Copper Alloy/Gold Plating Plug Shell Zinc Alloy/Nickel Plating Plastic(UL94V-0)/Black Spring Stainless Steel Backshell Aluminum Alloy/Nickel Plating Synthetic Rubber/Black Bushing Synthetic Rubber/Black Pin Rear Insulator Plastic(UL94V-0)/Black Cable Clamp Plastic(UL94V-0)/White Screw Stainless Steel Clamp Nut Plastic(UL94V-0)/Black Pin Contact Copper Alloy/Gold Plating Retaining Ring Stainless Steel Receptacle Shell Zinc Alloy/Nickel Plating Backshell Zinc Alloy/Nickel Plating Bushing Synthetic Rubber/Black Pin Front Insulator Receptacle, Cable Receptacle ・Soldering only, 20AWG max. ・Soldering Use,：20AWG Max Applicable Wire Item 900V AC(r.m.s.) ／ 1 minute 1,000M Ω Min. at 500V DC Operating Temperature Range without (D6) 090804 3A Max. ／ Contact Conductor Size mounting Item 10 Contacts 2 Contacts Rated Current Cable Receptacle Cable Clamp Plastic(UL94V-0)/White Clamp Nut Zinc Alloy/Nickel Plating Ground Lug Copper Alloy/Gold Plating ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp CM10 Series Unit：mm ○ 10-Contact Plug ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. Right Angle Plug 34 φ21 φ21 (φ21) Straight Plug (51.4) (32.5) Straight Plug P/N Right Angle Plug P/N CM10-SP10S-S(D6) CM10-AP10S-S(D6) Cable Outside Dia. φ 4.0 ∼φ 6.0 CM10-SP10S-M(D6) CM10-AP10S-M(D6) φ 6.0 ∼φ 9.0 CM10-SP10S-L(D6) CM10-AP10S-L(D6) φ 9.0 ∼φ 11.6 Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. ○ Contact of 10-Contact Plug Loose Piece Contact Applicable Wire Contact P/N (100 pcs in 1 bag ) Item Crimping Type Soldering Type Hand Tool P/N Conductor Size Insulation Dia. CM10-#22SC(C1)(D8)-100 20 ∼ 22AWG φ 1.10 ∼φ 1.87 357J-50446T CM10-#22SC(C2)(D8)-100 23 ∼ 28AWG φ 0.80 ∼φ 1.50 357J-50447T CM10-#22SC(S1)(D8)-100 20 AWG Max. Extraction Tool P/N 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Contact P/N Applicable Wire ( 5,000 pcs on 1 reel ) Conductor Size The semi-automatic crimping machine is required when you terminate the reel contacts. Semi-Automatic Crimping Machine Insulation Dia. 1set P/N Extraction Tool P/N Applicator P/N CM10-#22SC(C1)(D8)-5000 20 ∼ 22AWG φ 1.10 ∼φ 1.87 AP-A50539T AP-A50539T-1 CM10-#22SC(C2)(D8)-5000 23 ∼ 28AWG φ 0.80 ∼φ 1.50 AP-A50540T AP-A50540T-1 357J-50548T 1. Both of AP50539T and AP50540T are the set part numbers which include both of the semi-automatic crimping machines and the applicators (stripper crimpers). 2. Each of AP50539T and AP50540T contains exactly the same semi-automatic machine. Therefore if you change the applicator, you can terminate both of CM10-#22SC(C1)(D8)-5000 and CM10-#22SC(C2)(D8)-5000 by one semi-automatic crimping machine. CM10-#22SC(C2)(D8)- □□□□ 15.6 15.6 15.6 6 6 2.45 6 2.65 CM10-#22SC(S1)(D8)- □□□□ 1.65 CM10-#22SC(C1)(D8)- □□□□ ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 CM10 Series Unit：mm ○ 2-Contact Plug ・Contact Style : Socket ・Termination：Solder or Crimp ・The contact is sold separately. Right Angle Plug １ ２ １ ２ 34 φ21 φ21 (φ21) Straight Plug (51.4) (32.5) Straight Plug P/N Right Angle Plug P/N Cable Outside Dia. CM10-SP2S-S(D6) CM10-AP2S-S(D6) φ 4.0 ∼φ 6.0 CM10-SP2S-M(D6) CM10-AP2S-M(D6) φ 6.0 ∼φ 9.0 CM10-SP2S-L(D6) CM10-AP2S-L(D6) φ 9.0 ∼φ 11.6 Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. ○ Contact of 2-Contact Plug Loose Piece Contact Contact P/N Item ( 100 pcs in 1 bag ) Applicable Wire Conductor Size Crimping Type CM10-#22SC(C3)(D8)-100 16 ∼ 20AWG Soldering Type CM10-#22SC(S2)(D8)-100 16AWG Max. Insulation Dia. φ 1.87 ∼φ 2.45 Hand Tool P/N Extraction Tool P/N 357J-50448T 357J-50548T 1. The packaging specification is 100 pcs of contacts per bag for sale. ２．Both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Contact P/N Applicable Wire ( 4,000 pcs on 1 reel ) CM10-#22SC(C3)(D8)-4000 The semi-automatic crimping machine is required when you terminate the reel contacts. Semi-Automatic Crimping Machine Conductor Size Insulation Dia. 1set P/N Applicator P/N 16 ∼ 20AWG φ 1.87 ∼φ 2.45 AP-A50541T AP-A50541T-1 Extraction Tool P/N 357J-50548T 1. Due to the construction of CM10-#22SC-(C3)(D8)-4000 you can only make the crimping process by AP50541T. So the process of striping cable shall be made in advance. 2. AP50541T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper). CM10-#22SC(C3)(D8)- □□□□ CM10-#22SC(S2)(D8)- □□□□ 15.6 15.6 6 4 φ2.1 6 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 CM10 Series Unit：mm ○ Straight Cable Receptacle Cable Outside Dia. CM10-CR10P-S φ 4.0 ∼φ 6.0 CM10-CR10P-M φ 6.0 ∼φ 9.0 CM10-CR10P-L φ 9.0 ∼φ 11.6 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・ Insulation Dia. : φ 1.87 Max. ・Contact No.10 grounded to shell with ground lug ３ １ １０ ８ ７ 18.9 21.0 10 Pins P/N ４ （51.3） P/N Cable Outside Dia. CM10-CR2P-S φ 4.0 ∼φ 6.0 CM10-CR2P-M φ 6.0 ∼φ 9.0 CM10-CR2P-L φ 9.0 ∼φ 11.6 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. 18.9 21.0 2 Pins （51.3） Note: The applicable cable outside diameter is in the case of cabtyre cable. Please contact the nearest sales office when you use a different cable. ○ Receptacle P/N 10 Pins P/N 2 Pins CM10-R10P(D3)-01 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof CM10-R2P(D3)-01 ・Pin contact style only ・Soldering termination only ・Conductor Size : 20 AWG Max. ・Individually waterproof Contact No.10 grounded to shell with ground lug (7.9) Main key positon mark 4 10 10 1 1 7 8 1 φ15.3 8 3 φ12 7 φ15.3 3 5.2 φ12 1 4 Main key positon mark (7.9) 5.2 2 2 DDK DDK 1.7 4-φ3.2 (13.6) □23.4 +0.25 0 (13.6) +0.2 □23.4 8.4 □17.26 φ12 +0.1 4-φ3.2 1.7 8.4 φ16.2 □17.26 ( ) □17.26 0.1 0 1-0.1 3 min. ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 Mounting Dimensions 4-M3 CM10 Series Unit：mm ○ Mated Dimensions Receptacle ＋ Straight Plug Receptacle ＋ Right Angle Plug 23.4 φ21 (33.5) φ21 (44.3) (52) 23.4 ○ Dust Cap for Receptacle & Cable Receptacle P/N 7 φ20.7 Material : Plastic φ14.8 φ16.3 CM10-R-DC DDK Color : Red 2 7.9 ○ Supporting Cover Straight Plug Right Angle Plug P/N CM10-AP-D-CV 30 22.8 35.6 (53) P/N CM10-SP-CV 32 40 (27) ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 45