Fixed and Pluggable Metric Pin Spacing

NEXT
FIND IT
FIXED PRINTED CIRCUIT
Metric Pin Spacinga
Tubular Screw Clamp
Extremely small "footprint" and the highest circuit
density available
Extremely small "footprint" and the highest circuit
density available
For use when standard size printed
circuit terminal blocks are too large for
available space or where a very small
circuit board is utilized.
Our new subminiature design offers a
low profile, an extremely small "footprint"
and the highest circuit density available.
•
•
•
Multipole, Single Mold Design
Up to 7 Circuits Per Inch
Pin Spacing is Maintained When
Terminal Blocks are Placed End-to-End
With Wire Protector
Housing Material: Polyamide 6.6
Standard Color: Gray
a
Blocks with US (Inch) pin spacing
begin on page 110.
Ratings
IEC/VDE
AK550
AK555
Front Wire Entry
Top Wire Entry
Pin Spacing 3.5mm (.138)
Stripping Length 5.5mm (.217)
Screw Hole Diameter 2.5mm (.098)
Wire Range
0.25-1.0mm2
28-16 AWG
28-16 AWG
(File No. E101811)
(File No. LR68503)
No. of
Poles
Ordering Information
Terminal Block, mm Pin Spacing
Current
6A
6A
6A
Type
Voltage
125V
300V
150V
Length L
mm (in.)
Cat. No.
2
3
4
5
6
7
AK550/2wp
AK550/3wp
AK550/4wp
AK550/5wp
AK550/6wp
AK550/7wp
29.002
29.003
29.004
29.005
29.006
29.007
7.00 (
10.50 (
14.00 (
17.50 (
21.00 (
24.50 (
8
9
10
11
12
13
AK550/8wp
AK550/9wp
AK550/10wp
AK550/11wp
AK550/12wp
AK550/13wp
29.008
29.009
29.010
29.011
29.012
29.013
28.00
31.50
35.00
38.50
42.00
45.50
14
15
16
AK550/14wp
AK550/15wp
AK550/16wp
29.014
29.015
29.016
L
➤
Pin Spacing 3.5mm (.138)
Stripping Length 5.5mm (.217)
Screw Hole Diameter 2.5mm (.098)
Std. Pk.
Type
100
100
50
50
50
30
AK555/2wp
AK555/3wp
AK555/4wp
AK555/5wp
AK555/6wp
AK555/7wp
29.102
29.103
29.104
29.105
29.106
29.107
7.00 (
10.50 (
14.00 (
17.50 (
21.00 (
24.50 (
(1.10)
(1.24)
(1.38)
(1.52)
(1.65)
(1.79)
30
30
30
20
20
20
AK555/8wp
AK555/9wp
AK555/10wp
AK555/11wp
AK555/12wp
AK555/13wp
29.108
29.109
29.110
29.111
29.112
29.113
28.00
31.50
35.00
38.50
42.00
45.50
49.00 (1.93)
52.50 (2.07)
56.00 (2.21)
20
20
15
AK555/14wp
AK555/15wp
AK555/16wp
29.114
29.115
29.116
➤
➤1.75mm
➤
6.5mm
L
➤
.28)
.41)
.55)
.69)
.83)
.97)
100
100
50
50
50
30
(1.10)
(1.24)
(1.38)
(1.52)
(1.65)
(1.79)
30
30
30
20
20
20
49.00 (1.93)
52.50 (2.07)
56.00 (2.21)
20
20
15
➤1.75mm
➤
8.3mm
3.8mm
2mm
➤
➤
➤ ➤
➤
3.5mm
➤ ➤
Dimensions
mm
0.90
1.75
2.00
3.50
132
in.
0.035
0.069
0.079
0.138
mm
3.80
6.50
8.30
6.5mm
➤ ➤
➤
2mm➤
➤
➤
3.5mm
2mm
8.3mm
➤
➤
➤ ➤ Ø0.9mm
Std. Pk.
➤
➤
➤
➤
➤ ➤
➤
3.5mm
➤ ➤
Voltage
125V
300V
150V
Length L
mm (in.)
Cat. No.
➤
2mm➤
Current
6A
6A
6A
.28)
.41)
.55)
.69)
.83)
.97)
➤
➤
Wire Range
0.25-1.0mm 2
28-16 AWG
28-16 AWG
Ø0.9mm
•
•
•
in.
0.150
0.256
0.327
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
3.5mm
➤
PREVIOUS
HOME
NEXT
FIND IT
FIXED PRINTED CIRCUIT
Metric Pin Spacinga
Tubular Screw Clamp
For wire-to-board connections in
applications with strict budgets and
where infrequent wire terminations are
expected.
Our "mini" design offers a low profile and
a small "footprint".
The popular AK500 is now offered in a
single mold design as Type AK502.
Please contact Altech for ordering
information.
AK500
Multipole, Modular Design
Wire Protector Standard
Housing Material: Polyamide 6.6
Standard Color: Gray
Front Wire Entry
Pin Spacing 5mm (.197)
Stripping Length 6mm (.236)
Screw Hole Diameter 3mm (.118)
Blocks with US (Inch) pin spacing
begin on page 110.
Ratings
IEC/VDE
Wire Range
0.5-1.5mm2
22-14 AWG
22-14 AWG
(File No. E101811)
(File No. LR68503)
No. of
Poles
Ordering Information
Terminal Block, mm Pin Spacing
Top Wire Entry
Type
Current
16A
15A
15A
Pin Spacing 5mm (.197)
Stripping Length 5mm (.197)
Screw Hole Diameter 3mm (.118)
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
Wire Range
0.5-1.5mm 2
22-14 AWG
22-14 AWG
Std. Pk.
30.702
30.703
30.704
30.705
30.706
30.707
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK505/2wp
AK505/3wp
AK505/4wp
AK505/5wp
AK505/6wp
AK505/7wp
30.752
30.753
30.754
30.755
30.756
30.757
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
8
9
10
11
12
14
AK500/8wp
AK500/9wp
AK500/10wp
AK500/11wp
AK500/12wp
AK500/13wp
30.708
30.709
30.710
30.711
30.712
30.713
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
AK505/8wp
AK505/9wp
AK505/10wp
AK505/11wp
AK505/12wp
AK505/13wp
30.758
30.759
30.760
30.761
30.762
30.763
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
15
16
16
17
18
19
AK500/14wp
AK500/15wp
AK500/16wp
AK500/17wp
AK500/18wp
AK500/19wp
30.714
30.715
30.716
30.717
30.718
30.719
70.00
75.00
80.00
85.00
90.55
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
AK505/14wp
AK505/15wp
AK505/16wp
AK505/17wp
AK505/18wp
AK505/19wp
30.764
30.765
30.766
30.767
30.768
30.769
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
20
21
22
23
24
AK500/20wp
AK500/21wp
AK500/22wp
AK500/23wp
AK500/24wp
30.720
30.721
30.722
30.723
30.724
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
AK505/20wp
AK505/21wp
AK505/22wp
AK505/23wp
AK505/24wp
30.770
30.771
30.772
30.773
30.774
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
➤
➤➤
L
➤
➤
7.5mm
➤
10mm
2.7mm
10mm
4.5mm
➤
➤ ➤ ø0.9mm
2.6mm ➤ ➤
➤
3.5mm➤
➤
➤
➤
2.6mm ➤
➤
5mm ➤
➤
0.6mm
➤
➤
5mm
7.5mm
➤
➤ ➤
➤
➤
➤
➤
in.
0.146
0.177
0.197
0.295
0.394
0.591
L
➤
➤➤
➤
➤
➤
mm
3.70
4.50
5.00
7.50
10.00
15.00
Length L
mm (in.) Std. Pk.
Cat. No.
AK500/2wp
AK500/3wp
AK500/4wp
AK500/5wp
AK500/6wp
AK500/7wp
Dimensions
in.
0.024
0.035
0.039
0.043
0.102
0.106
0.138
Type
Voltage
250V
300V
300V
2
3
4
5
6
7
0.6mm
mm
0.60
0.90
1.00
1.10
2.60
2.70
3.50
Current
16A
15A
15A
2.7mm
Ø1mm
a
AK505
➤
3.7mm
➤
➤
➤ ➤
1.1mm
➤ ➤1.1mm
•
•
•
•
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
133
PREVIOUS
HOME
NEXT
FIND IT
FIXED PRINTED CIRCUIT
Metric Pin Spacinga
Tubular Screw Clamp
For wire-to-board connections in
applications with strict budgets and
where infrequent wire terminations are
expected.
The popular AK100 is now offered in a
single mold design as Type AK102.
Please contact Altech for ordering
information.
• Multipole, Modular Design
• Wire Protector Standard
• Housing Material: Polyamide 6.6
• Standard Color: Gray
a
Blocks with US (Inch) pin spacing
begin on page 110.
AK100
AK105
Front Wire Entry
Top Wire Entry
Pin Spacing 5mm (.197)
Stripping Length 6mm (.236)
Screw Hole Diameter 4mm (.158)
Pin Spacing 5mm (.197)
Stripping Length 5mm (.197)
Screw Hole Diameter 3mm (.118)
Wire Range
0.5-2.5mm 2
22-14 AWG
22-14 AWG
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
No. of
Poles
Ordering Information
Terminal Block, mm Pin Spacing
Current
16A
15A
15A
Type
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
Wire Range
0.5-2.5mm 2
22-14 AWG
22-14 AWG
Std. Pk.
Current
16A
15A
15A
Type
Cat. No.
Voltage
250V
300V
300V
Length L
mm (in.)
Std. Pk.
2
3
4
5
6
7
AK100/2wp
AK100/3wp
AK100/4wp
AK100/5wp
AK100/6wp
AK100/7wp
30.002
30.003
30.004
30.005
30.006
30.007
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK105/2wp
AK105/3wp
AK105/4wp
AK105/5wp
AK105/6wp
AK105/7wp
30.052
30.053
30.054
30.055
30.056
30.057
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
8
9
10
11
12
13
AK100/8wp
AK100/9wp
AK100/10wp
AK100/11wp
AK100/12wp
AK100/13wp
30.008
30.009
30.010
30.011
30.012
30.013
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
AK105/8wp
AK105/9wp
AK105/10wp
AK105/11wp
AK105/12wp
AK105/13wp
30.058
30.059
30.060
30.061
30.062
30.063
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
14
15
16
17
18
19
AK100/14wp
AK100/15wp
AK100/16wp
AK100/17wp
AK100/18wp
AK100/19wp
30.014
30.015
30.016
30.017
30.018
30.019
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
AK105/14wp
AK105/15wp
AK105/16wp
AK105/17wp
AK105/18wp
AK105/19wp
30.064
30.065
30.066
30.067
30.068
30.069
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
20
21
22
23
24
AK100/20wp
AK100/21wp
AK100/22wp
AK100/23wp
AK100/24wp
30.020
30.021
30.022
30.023
30.024
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
AK105/20wp
AK105/21wp
AK105/22wp
AK105/23wp
AK105/24wp
30.070
30.071
30.072
30.073
30.074
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
L
➤
➤➤
➤
➤
9mm
➤
0.7mm
L
➤
➤➤
➤
➤
9mm
➤
4.5mm
5mm ➤
4mm
➤
➤
➤ ➤
➤
➤
➤
➤
5mm
➤
3.1mm
➤
12.5mm
➤
➤
Ø1mm
➤
➤
➤
3.1mm ➤
➤
in.
0.157
0.177
0.197
0.295
0.354
0.394
0.492
0.591
0.886
0.984
➤
mm
4.00
4.50
5.00
7.50
9.00
10.00
12.50
15.00
22.50
25.00
➤
➤
➤
134
in.
0.024
0.028
0.035
0.039
0.043
0.079
0.102
0.106
0.122
0.134
0.138
➤ ➤
➤
➤
3.4mm
➤
12.5mm
3.4mm
Ø1mm
➤
➤
Dimensions
mm
0.60
0.70
0.90
1.00
1.10
2.00
2.60
2.70
3.10
3.40
3.50
➤
0.7mm
2mm
2m
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
3.5mm
PREVIOUS
HOME
AK110
Front Wire Entry
30.102
30.103
30.104
30.105
30.106
30.107
15.00 ( .59)
22.50 ( .89)
30.00 (1.18)
37.50 (1.48)
45.00 (1.77)
52.50 (2.08)
100
100
50
50
50
30
AK110/8wp
AK110/9wp
AK110/10wp
AK110/11wp
AK110/12wp
AK110/13wp
30.108
30.109
30.110
30.111
30.112
30.113
60.00
67.50
75.00
82.50
90.00
97.50
(2.36)
(2.66)
(2.95)
(3.25)
(3.54)
(3.84)
AK110/14wp
AK110/15wp
AK110/16wp
AK110/17wp
AK110/18wp
AK110/19wp
30.114
30.115
30.116
30.117
30.118
30.119
105.00
112.50
120.00
127.50
135.00
142.50
AK110/20wp
AK110/21wp
AK110/22wp
AK110/23wp
AK110/24wp
30.120
30.121
30.122
30.123
30.124
150.00
157.50
165.00
172.50
180.00
Length L
mm (in.)
Std. Pk.
AK115/2wp
AK115/3wp
AK115/4wp
AK115/5wp
AK115/6wp
AK115/7wp
30.152
30.153
30.154
30.155
30.156
30.157
15.00 ( .59)
22.50 ( .89)
30.00 (1.18)
37.50 (1.48)
45.00 (1.77)
52.50 (2.08)
100
100
50
50
50
30
30
30
30
20
20
20
AK115/8wp
AK115/9wp
AK115/10wp
AK115/11wp
AK115/12wp
AK115/13wp
30.158
30.159
30.160
30.161
30.162
30.163
60.00
67.50
75.00
82.50
90.00
97.50
(2.36)
(2.66)
(2.95)
(3.25)
(3.54)
(3.84)
30
30
30
20
20
20
(4.13)
(4.43)
(4.73)
(5.02)
(5.32)
(5.61)
20
20
15
15
15
15
AK115/14wp
AK115/15wp
AK115/16wp
AK115/17wp
AK115/18wp
AK115/19wp
30.164
30.165
30.166
30.167
30.168
30.169
105.00
112.50
120.00
127.50
135.00
142.50
(4.13)
(4.43)
(4.73)
(5.02)
(5.32)
(5.61)
20
20
15
15
15
15
(5.91)
(6.20)
(6.50)
(6.79)
(7.09)
15
10
10
10
10
AK115/20wp
AK115/21wp
AK115/22wp
AK115/23wp
AK115/24wp
30.170
30.171
30.172
30.173
30.174
150.00
157.50
165.00
172.50
180.00
(5.91)
(6.20)
(6.50)
(6.79)
(7.09)
15
10
10
10
10
L
➤
9mm
➤
➤
12.5mm
➤ ➤
3.4mm
4mm
3.1mm
7.5mm➤
➤
➤
➤
34.402
34.403
34.404
34.405
34.406
34.407
15.00 ( .59)
25.00 ( .99)
35.00 (1.38)
45.00 (1.77)
55.00 (2.17)
65.00 (2.56)
AK600/8wp
AK600/9wp
AK600/10wp
AK600/11wp
AK600/12wp
34.408
34.409
34.410
34.411
34.412
➤
75.00
85.00
95.00
105.00
115.00
➤
L
➤
➤
Std. Pk.
100
50
30
30
20
20
(2.95)
(3.35)
(3.74)
(4.13)
(4.53)
20
15
15
10
10
7.5mm
➤
➤
0.6mm
3.5mm
2.6mm ➤
➤
7.5mm
3.5mm➤
➤
➤ ➤ Ø0.9mm
➤
➤ ➤ 2mm
➤
7.5mm
➤
➤
➤ ➤ ø1mm
➤
3.4mm
12.5mm
➤
➤
➤
➤
➤
➤ 3.1mm
9mm
AK600/2wp
AK600/3wp
AK600/4wp
AK600/5wp
AK600/6wp
AK600/7wp
➤ ➤
➤
➤
➤
4.5mm
➤
➤
➤
➤
➤
➤
0.7mm
Length L
mm (in.)
2.7mm
➤
Cat. No.
Type
➤
➤
Voltage
500V
300V
300V
➤
L
Cat. No.
Type
Current
16A
15A
15A
Ø1mm
0.7mm➤ ➤
➤
Voltage
500V
300V
300V
➤
AK110/2wp
AK110/3wp
AK110/4wp
AK110/5wp
AK110/6wp
AK110/7wp
Wire Range
0.5-1.5mm 2
22-14 AWG
22-14 AWG
Current
16A
15A
15A
10mm
Std. Pk.
Wire Range
0.5-2.5mm2
22-14 AWG
22-14 AWG
➤
Length L
mm (in.)
Pin Spacing 10mm (.394)
Stripping Length 6mm (.236)
Screw Hole Diameter 3mm (.118)
➤
Cat. No.
Type
Top Wire Entry
➤
Voltage
500V
300V
300V
AK600
Front Wire Entry
4.5mm
Current
16A
15A
15A
AK115
Pin Spacing 7.5mm (.295)
Stripping Length 5mm (.197)
Screw Hole Diameter 3.5mm (.138)
➤
➤
Wire Range
0.5-2.5mm 2
22-14 AWG
22-14 AWG
FIND IT
➤
➤
Pin Spacing 7.5mm (.295)
Stripping Length 6mm (.236)
Screw Hole Diameter 3.5mm (.138)
NEXT
2mm
➤
10mm
➤
➤➤
1.1mm
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
135
PREVIOUS
HOME
NEXT
FIND IT
FIXED PRINTED CIRCUIT
Metric Pin Spacinga
Screw-Cage Clamp
Minimum clearance, small footprint conserves
valuable PCB real estate
For wire-to-board connections in
industrial applications and where
frequent wire terminations occur.
• Multipole, Modular Design
• Housing Material: Polyamide 6.6
• Standard Color: AK300 is Gray,
all others are green
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
No. of
Poles
Terminal Block, mm Pin Spacing
Pin Spacing 5.08mm (.200)c
Stripping Length 7mm (.276)
Screw Hole Diameter 3.5mm (.138)
Wire Range
0.5-2.5mm 2
22-12 AWG
22-12 AWG
Wire Range
0.5-1.5mm2
28-14 AWG
28-14 AWG
Type
AK300/2
AK300/3
AK300/4
AK300/5
AK300/6
AK300/7
30.602
30.603
30.604
30.605
30.606
30.607
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
8
9
10
11
12
13
AK300/8
AK300/9
AK300/10
AK300/11
AK300/12
AK300/13
30.608
30.609
30.610
30.611
30.612
30.613
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
14
15
16
17
18
19
AK300/14
AK300/15
AK300/16
AK300/17
AK300/18
AK300/19
30.614
30.615
30.616
30.617
30.618
30.619
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
20
21
22
23
24
AK300/20
AK300/21
AK300/22
AK300/23
AK300/24
30.620
30.621
30.622
30.623
30.624
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
Dimensions
mm
5.00
5.08
6.50
8.10
9.00
10.00
10.50
12.50
13.50
15.00
15.24
19.00
Std. Pk.
2
3
4
5
6
7
2.7mm ➤
in.
0.020
0.024
0.031
0.035
0.039
0.071
0.098
0.106
0.118
0.138
0.157
0.173
0.177
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
➤
mm
0.50
0.60
0.80
0.90
1.00
1.80
2.50
2.70
3.00
3.50
4.00
4.40
4.50
Current
16A
15A
15A
in.
0.197
0.200
0.256
0.319
0.354
0.394
0.413
0.492
0.531
0.591
0.600
0.748
L
➤
➤ ➤ 0.6mm
➤ 1mm ➤ ➤
5mm
➤ ➤
Current
16A
15A
15A
Type
AK(Z)250/2
AK(Z)250/3
AK(Z)250/4
AK(Z)250/5
AK(Z)250/6
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
32.402
32.403
32.404
32.405
32.406
10.16
15.24
20.32
25.40
30.48
Std. Pk.
(.40)
(.60)
(.80)
(1.00)
(1.20)
100
100
50
50
50
0.6mm
➤
12.5mm
➤
L
➤
1.8mm
Ordering Information
Pin Spacing 5mm (.197)
Stripping Length 7mm (.276)
Screw Hole Diameter 3.5mm (.138)
8.1mm
➤
10mm
Blocks with US (Inch) pin spacing
begin on page 110.
AK(Z)250
Front Wire Entry
4.5mm ➤ ➤➤ 12.5mm ➤
a
AK300
45˚ Wire Entry
3.5mm
0.8mm
2.5mm
➤ ➤
6.5mm
➤
➤
1mm
c
0.5mm
➤ ➤
4mm
➤ ➤
Appropriate for use in metric pin spacings up to the number
of poles shown.
138
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
Test probe openings on back
for access to pins
Open Bottom Design
AK350
AK700
AK351
Front Wire Entry
Front Wire Entry
Front Wire Entry
Pin Spacing 5mm (.197)
Stripping Length 6mm (.236)
Screw Hole Diameter 4.0mm (.158)
Pin Spacing 5mm (.197)
Stripping Length 6mm (.236)
Screw Hole Diameter 4.0mm (.158)
Wire Range
0.5-2.5mm2
22-12 AWG
28-14 AWG
Wire Range
0.5-2.5mm 2
22-12 AWG
28-14 AWG
Current
16A
16A
16A
Type
Cat. No.
Voltage
250V
300V
300V
Length L
mm (in.)
Std. Pk.
Current
16A
16A
16A
Type
Pin Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 3.5mm (.138)
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
Wire Range
0.5-4mm2
22-12 AWG
22-12 AWG
Std. Pk.
Current
16A
15A
15A
Type
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
Std. Pk.
AK350/2
AK350/3
AK350/4
AK350/5
AK350/6
AK350/7
32.002
32.003
32.004
32.005
32.006
32.007
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK351/2
AK351/3
AK351/4
AK351/5
AK351/6
AK351/7
33.002
33.003
33.004
33.005
33.006
33.007
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK700/2
AK700/3
AK700/4
AK700/5
AK700/6
AK700/7
30.802
30.803
30.804
30.805
30.806
30.807
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK350/8
AK350/9
AK350/10
AK350/11
AK350/12
AK350/13
32.008
32.009
32.010
32.011
32.012
32.013
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
AK351/8
AK351/9
AK351/10
AK351/11
AK351/12
AK351/13
33.008
33.009
33.010
33.011
33.012
33.013
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
AK700/8
AK700/9
AK700/10
AK700/11
AK700/12
AK700/13
30.808
30.809
30.810
30.811
30.812
30.813
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
AK350/14
AK350/15
AK350/16
AK350/17
AK350/18
AK350/19
32.014
32.015
32.016
32.017
32.018
32.019
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
AK351/14
AK351/15
AK351/16
AK351/17
AK351/18
AK351/19
33.014
33.015
33.016
33.017
33.018
33.019
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
AK700/14
AK700/15
AK700/16
AK700/17
AK700/18
AK700/19
30.814
30.815
30.816
30.817
30.818
30.819
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
AK350/20
AK350/21
AK350/22
AK350/23
AK350/24
32.020
32.021
32.022
32.023
32.024
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
AK351/20
AK351/21
AK351/22
AK351/23
AK351/24
33.020
33.021
33.022
33.023
33.024
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
AK700/20
AK700/21
AK700/22
AK700/23
AK700/24
30.820
30.821
30.822
30.823
30.824
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
➤
2.7mm➤ ➤
5mm ➤
➤
➤ ➤ 1mm
4.5mm ➤
➤
➤
9mm
➤
10.5mm
➤
➤
2.7mm ➤ ➤
5mm
➤ ➤
➤ ➤ 1mm
19mm
➤➤
0.8mm
➤ ➤
4.5mm➤
➤
2.7mm➤ ➤
5mm ➤ ➤
➤
3.5mm
13.5mm
4.4mm
➤ ➤
4mm
➤
➤
➤ 3mm
0.8mm➤ ➤
L
➤ ➤ 0.6mm
➤
➤➤ 0.6mm
13.5mm
9mm ➤
➤
➤
➤ 3.5mm
➤
➤
➤ 3mm
➤
➤ ➤ 0.6mm
L
➤
➤
➤
➤
➤
➤
L
➤
➤
➤ ➤ 0.9mm
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
5mm ➤
➤
139
PREVIOUS
HOME
NEXT
FIND IT
FIXED PRINTED CIRCUIT
DOUBLE AND SINGLE LEVEL
Metric Pin Spacinga
Screw-Cage Clamp
For wire-to-board connections in
industrial applications and where
frequent wire terminations occur.
Use Double Level where space requirements call for high density wiring.
• Multipole, Modular Design
• Housing Material: Polyamide 6.6
• Standard Color: Green
Blocks with US (Inch) pin spacing
begin on page 110.
AK750
Top Wire Entry
Front Wire Entry
Pin Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 3mm (.118)
Wire Range
0.5-4mm2
22-12 AWG
22-12 AWG
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
No. of Poles
AK705
AK400
AK750 AK710
AK790 AK793
Length L
mm (in.)
Cat. No.
Std. Pk.
Wire Range
0.5-4mm 2
22-12 AWG
22-12 AWG
Type
Length L
mm (in.)
Cat. No.
Std. Pk.
AK705/2
AK705/3
AK705/4
AK705/5
AK705/6
AK705/7
35.102
35.103
35.104
35.105
35.106
35.107
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK750/4
AK750/6
AK750/8
AK750/10
AK750/12
AK750/14
31.004
31.006
31.008
31.010
31.012
31.014
12.50
17.50
22.50
27.50
32.50
37.50
( .49)
( .69)
( .89)
(1.08)
(1.28)
(1.48)
50
50
25
25
25
15
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
AK705/8
AK705/9
AK705/10
AK705/11
AK705/12
AK705/13
35.108
35.109
35.110
35.111
35.112
35.113
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
AK750/16
AK750/18
AK750/20
AK750/22
AK750/24
AK750/26
31.016
31.018
31.020
31.022
31.024
31.026
42.50
47.50
52.50
57.50
62.50
67.50
(1.67)
(1.87)
(2.07)
(2.26)
(2.46)
(2.66)
15
15
15
10
10
10
AK705/14
AK705/15
AK705/16
AK705/17
AK705/18
AK705/19
35.114
35.115
35.116
35.117
35.118
35.119
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
AK750/28
AK750/30
AK750/32
AK750/34
AK750/36
AK750/38
31.028
31.030
31.032
31.034
31.036
31.038
72.50
77.50
82.50
87.50
92.50
97.50
(2.85)
(3.05)
(3.25)
(3.45)
(3.64)
(3.84)
10
10
10
10
10
10
AK705/20
AK705/21
AK705/22
AK705/23
AK705/24
35.120
35.121
35.122
35.123
35.124
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
AK750/40
AK750/42
AK750/44
AK750/46
AK750/48
AK750/50
31.040
31.042
31.044
31.046
31.048
31.050
102.50
107.50
112.50
117.50
122.50
127.50
(4.03)
(4.23)
(4.43)
(4.63)
(4.82)
(5.02)
5
5
5
5
5
5
L
➤➤
0.6mm
10.5mm
➤
➤
➤
➤
➤
➤
11.1mm
➤
➤
0.9mm
11.5mm
9mm
➤
➤
4.4mm
4mm ➤
➤ ➤
18mm
3.4mm
➤
➤ ➤ 5mm
➤
➤
➤
➤
21.5mm
➤
➤ 2.5mm
➤
2.7mm➤
➤
➤
in.
0.413
0.425
0.437
0.453
0.492
0.591
0.709
0.748
0.846
0.854
0.886
0.984
1.236
1.339
➤ ➤
➤
mm
10.50
10.80
11.10
11.50
12.50
15.00
18.00
19.00
21.50
21.70
22.50
25.00
31.40
34.00
L
➤ ➤ 0.6mm
2.7mm➤ ➤
2.5mm➤ ➤
5mm ➤
34mm
➤
➤
140
in.
0.024
0.03
0.035
0.039
0.098
0.106
0.134
0.157
0.173
0.177
0.197
0.205
0.256
0.295
0.354
0.394
Voltage
250V
300V
300V
2
3
4
5
6
7
Dimensions
mm
0.60
0.80
0.90
1.00
2.50
2.70
3.40
4.00
4.40
4.50
5.00
5.20
6.50
7.50
9.00
10.00
Current
16A
15A
15A
4
6
8
10
12
14
➤
Terminal Block, mm Pin Spacing
Type
Voltage
250V
300V
300V
19mm
Ordering Information
Current
16A
15A
15A
Pin Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 4mm (.158)
➤
➤
4mm ➤ ➤
➤
a
AK705
➤
15mm
➤ ➤ 0.9mm
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
5mm
➤➤ ➤
PREVIOUS
HOME
NEXT
FIND IT
No pin offset
AK790
AK793
AK710
Front Wire Entry
Front Wire Entry
Front Wire Entry
Pin Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 4mm (.157)
Pin Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 4mm (.157)
Voltage
250V
300V
300V
Wire Range
0.5-4mm2
22-12 AWG b
22-12 AWG b
Current
16A
15A
15A
Wire Range
0.5-4mm2
22-12 AWG
22-12AWG
Voltage
250V
300V
300V
Cat. No.
Length L
mm (in.)
Std. Pk.
AK790/4
34.804
10.00 ( .39)
50
AK790/8
34.808
20.00 ( .79)
25
AK793/4
34.904
20.00 ( .79)
50
AK790/12
34.812
30.00 (1.18)
25
AK793/6
34.906
30.00 (1.18)
50
AK790/16
34.816
40.00 (1.58)
15
AK793/8
34.908
40.00 (1.58)
30
AK790/20
34.820
50.00 (1.97)
15
AK793/10
34.910
50.00 (1.97)
30
AK790/24
34.824
60.00 (2.36)
10
AK793/12
34.912
60.00 (2.36)
20
AK790/28
34.828
70.00 (2.76)
10
AK793/14
34.914
70.00 (2.76)
20
Type
Type
Cat. No.
Length L
mm (in.)
Std. Pk.
34.902
10.00 ( .39)
100
AK793/2
AK790/32
34.832
80.00 (3.15)
10
AK793/16
34.916
80.00 (3.15)
15
AK790/36
34.836
90.00 (3.54)
10
AK793/18
34.918
90.00 (3.54)
15
AK790/40
34.840
100.00 (3.94)
5
AK790/44
34.844
110.00 (4.33)
5
AK790/48
34.848
120.00 (4.72)
5
AK790/52
34.852
130.00 (5.12)
5
➤
➤
0.6mm
21.7mm
10.8mm
➤
➤➤
L
➤
➤
10.9mm
➤
➤
Cat. No.
Length L
mm (in.)
Std. Pk.
AK710/2
AK710/3
AK710/4
AK710/5
AK710/6
AK710/7
30.902
30.903
30.904
30.905
30.906
30.907
15.00 ( .59)
22.50 ( .89)
30.00 (1.18)
37.50 (1.48)
45.00 (1.77)
52.50 (2.08)
100
100
50
50
50
30
AK710/8
AK710/9
AK710/10
AK710/11
AK710/12
AK710/13
30.908
30.909
30.910
30.911
30.912
30.913
60.00
67.50
75.00
82.50
90.00
97.50
AK710/14
AK710/15
30.914
30.915
Type
L
➤
0.6mm➤ ➤
(2.36)
(2.66)
(2.95)
(3.25)
(3.54)
(3.84)
30
30
30
20
20
20
105.00 (4.13)
112.50 (4.43)
20
20
➤ 10.5mm ➤
➤
2.5mm
➤ ➤
➤
4.4mm
5.2mm
➤
15mm
➤ ➤
5mm
➤ ➤
0.9mm
➤
➤
➤ ➤ 0.9mm
➤ ➤
2.5mm
➤
4mm
➤ ➤
➤
31.4mm
16.4mm
5mm
➤ ➤
➤
0.9mm
➤ ➤ 5mm
➤
2.7mm
7.5mm
➤
➤
➤
Pending
Note: Missing No. of Poles available in 1997
b
➤➤
➤➤
➤
➤
2.7mm ➤
2.7mm
➤
5mm
3.4mm
➤ ➤ ➤➤
18mm
➤
➤
31.4mm
➤
➤
➤
➤
Voltage
500V
300V
300V
➤
L
➤
➤
0.6mm ➤
➤
Current
16A
15A
15A
19mm
Current
16A
15A
15A
➤ ➤➤
Wire Range
0.5-4mm2
22-12 AWG b
22-12 AWG b
Pin Spacing 7.5mm (.295)
Stripping Length 8mm (.315)
Screw Hole Diameter 3.5mm (.138)
9.3mm ➤
➤ 5mm
b
Pending
Note: Missing No. of Poles available in 1997
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
141
PREVIOUS
HOME
NEXT
FIND IT
FIXED PRINTED CIRCUIT
DOUBLE AND SINGLE LEVEL
Metric Pin Spacinga
Screw-Cage Clamp
For wire-to-board connections in
industrial applications and where
frequent wire terminations occur.
Use Double Level where space requirements call for high density wiring.
• Multipole, Modular Design
• Housing Material: Polyamide 6.6
• Standard Color: Green
Blocks with US (Inch) pin spacing
begin on page 110.
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
Pin Spacing 10mm (.394)
Stripping Length 8mm (.315)
Screw Hole Diameter 4mm (.158)
Wire Range
0.5-4mm2
22-12 AWG
22-12 AWG
Wire Range
0.5-4mm2
22-12 AWG
22-12 AWG
Current
16A
15A
15A
Voltage
630V
300V
300V
Voltage
630V
300V
300V
Length L
mm (in.)
Type
4
6
8
10
12
14
2
3
4
5
6
7
AK800/2
AK800/3
AK800/4
AK800/5
AK800/6
AK800/7
39.102
39.103
39.104
39.105
39.106
39.107
15.00
25.00
35.00
45.00
55.00
65.00
( .59)
( .99)
(1.38)
(1.77)
(2.17)
(2.56)
100
50
30
30
20
20
AK850/4
AK850/6
AK850/8
AK850/10
AK850/12
AK850/14
34.704
34.706
34.708
34.710
34.712
34.714
17.50
27.50
37.50
47.50
57.50
67.50
( .69)
(1.08)
(1.48)
(1.87)
(2.26)
(2.66)
50
25
15
15
10
10
16
18
20
22
24
8
9
10
11
12
AK800/8
AK800/9
AK800/10
AK800/11
AK800/12
39.108
39.109
39.110
39.111
39.112
75.00 (2.95)
85.00 (3.35)
95.00 (3.74)
105.00 (4.13)
115.00 (4.53)
20
15
15
10
10
AK850/16
AK850/18
AK850/20
AK850/22
AK850/24
34.716
34.718
34.720
34.722
34.724
77.50
87.50
97.50
107.50
117.50
(3.05)
(3.45)
(3.84)
(4.23)
(4.63)
10
10
10
10
10
Cat. No.
Std. Pk.
Type
➤
➤
10.5mm➤
➤
2.5mm ➤
21.5mm
➤
11.1mm➤
➤
➤
L
L
0.6mm
Std. Pk.
➤
➤
➤
➤
m➤
Cat. No.
➤
Length L
mm (in.)
Current
16A
15A
15A
No. of Poles
AK850 AK800
➤
➤
Terminal Block, mm Pin Spacing
Pin Spacing 10mm (.394)
Stripping Length 8mm (.315)
Screw Hole Diameter 3.5mm (.138)
➤
Ordering Information
AK850
Front Wire Entry
➤
a
AK800
Front Wire Entry
0.6mm
➤
➤➤
10mm
0.9mm
➤
34mm
4mm
➤➤
2.7mm
➤ ➤
10mm
➤
➤ ➤
➤
➤
➤➤➤➤ 4.4mm
19mm
➤
19mm
4mm
➤ ➤
➤
in.
0.413
0.437
0.591
0.748
0.846
0.984
1.339
➤
2.7mm
mm
10.50
11.10
15.00
19.00
21.50
25.00
34.00
➤
➤
➤➤
➤➤
142
in.
0.024
0.035
0.098
0.106
0.157
0.173
0.197
0.394
0.9mm
10mm
➤
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
5mm ➤
15mm ➤
➤
4.4mm
➤
Dimensions
mm
0.60
0.90
2.50
2.70
4.00
4.40
5.00
10.00
➤5mm
PREVIOUS
HOME
NEXT
FIND IT
FIXED PRINTED CIRCUIT
Metric Pin Spacinga
Dual Pin Screwless Spring
Clamp
Choose from 3 methods of clamp actuation:
Type AK(Z)3000 - Insert a small screwdriver
with a tip width up to 3mm (approx. 1/8") into
slot in housing and push to open clamp.
AK3001KD
45° Wire Entry
With Grooved Push Lever
Type AK(Z)3001KD - Push on grooved lever
with screwdriver to open clamp.
Type AK(Z)3001FD - Simply push flat lever
with finger to open clamp.
• Interlocking Sectional Design
• Stainless Steel Spring
• Front to Rear Pin Spacing,
5mm (.197 in.)
• Multipole Assemblies Supplied with End
Plate Installed.
• Housing Material: Polyamide 6.6
• Standard Color: Light Gray
Blocks with US (inch) pin spacing
begin on page 110.
Wire Range
0.5-2.5mm2
28-14 AWG
28-14 AWG
Ratings
IEC/VDE
Current
10A
15A
15A
Voltage
250V
300V
300V
Length L
mm (in.)
2
3
4
5
6
AK3000/1
AK3000/2
AK3000/3
AK3000/4
AK3000/5
AK3000/6
32.101
32.102
32.103
32.104
32.105
32.106
7.20 ( .28)
12.20 ( .48)
17.20 ( .67)
22.20 ( .87)
27.20 (1.07)
32.20 (1.28)
7
8
9
10
11
12
AK3000/7
AK3000/8
AK3000/9
AK3000/10
AK3000/11
AK3000/12
32.107
32.108
32.109
32.110
32.111
32.112
37.20
42.20
47.20
52.20
57.20
62.20
Type
b
(1.46)
(1.66)
(1.85)
(2.25)
(2.25)
(2.44)
200b
100
100
50
50
50
30
30
30
30
20
20
AK3001KD/1
AK3001KD/2
AK3000KD/3
AK3001KD/4
AK3001KD/5
AK3001KD/6
32.201
32.202
32.203
32.204
32.205
32.206
7.90
12.90
17.90
22.90
27.90
32.90
( .31)
( .50)
( .70)
( .90)
(1.10)
(1.30)
200b
100
100
50
50
50
AK3001KD/7
AK3001KD/8
AK3001KD/9
AK3001KD/10
AK3001KD/11
AK3001KD/12
32.207
32.208
32.209
32.210
32.211
32.212
37.90
42.90
47.90
52.90
57.90
62.90
(1.49)
(1.69)
(1.89)
(2.08)
(2.28)
(2.44)
30
30
30
30
20
20
200b
100
100
50
50
50
AK3001FD/1
AK3001FD/2
AK3001FD/3
AK3001FD/4
AK3001FD/5
AK3001FD/6
32.301
32.302
32.303
32.304
32.305
32.306
7.90 ( .31)
12.90 ( .50)
17.90 ( .70)
22.90 ( .90)
27.90 (1.10)
32.90 (1.30)
7
8
9
10
11
12
AK3001FD/7
AK3001FD/8
AK3001FD/9
AK3001FD/10
AK3001FD/11
AK3001FD/12
32.307
32.308
32.309
32.310
32.311
32.312
37.90
42.90
47.90
52.90
57.90
62.90
AP3001
32.200
➤
➤
14.2mm
➤
12.9mm
AK3001KD
m
L
➤
➤
4mm
➤
➤➤
12.9mm
➤
➤
➤
5mm 5mm
➤ ➤➤ ➤
3.65m
➤
0.7mm
14.2mm
➤
➤
4.7mm➤
➤
➤
➤➤
5mm
➤➤
30
30
30
30
20
20
50
➤➤
➤
5mm
➤
➤
3.65mm➤
➤ ➤
➤➤
➤➤➤
➤
➤
Supplied as 50 pole break apart assemblies, includes one
end plate. Order additional end plates separately
c
Up to 50 poles available, please consult Altech
5mm
➤
➤ ➤➤
➤
in.
0.228
0.370
0.508
0.559
14.2mm
➤
➤
2.7mm➤
(1.49)
(1.69)
(1.89)
(2.08)
(2.28)
(2.44)
12.9mm 9.4mm
L
50
12.9mm 9.4mm
32.100
Dimensions
b
Cat. No.
With Flat Push Lever
➤
mm
5.80
9.40
12.90
14.20
Type
Voltage
250V
300V
300V
Length L
mm (in.)
Std. Pk.
1b
2
3
4
5
6
AP3000
in.
0.028
0.106
0.144
0.157
0.185
0.197
Std. Pk.
Current
10A
15A
15A
With Grooved Push Lever
1
End Plate
mm
0.70
2.70
3.65
4.00
4.70
5.00
Wire Range
0.5-2.5mm2
28-14 AWG
28-14 AWG
➤
4mm
Terminal Block, mm Pin Spacing
Two through twelve pole assemblies
include one endplate
Pin Spacing 5mm (.197)
Stripping Length 6mm (.236)
5.8mm
Terminal Block, mm Pin Spacing
Two through twelve pole assemblies
include one endplate
45° Wire Entry
With Flat Push Lever
Cat. No.
No. of
Poles c
Ordering Information
AK3001FD
Pin Spacing 5mm (.197)
Stripping Length 6mm (.236)
4mm
a
AK3000
45° Wire Entry
Without Lever
5mm
➤
➤
5mm
➤ mm
3.65mm ➤ ➤
➤ ➤ 0.7mm
AK3001FD
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
143
PREVIOUS
HOME
NEXT
FIND IT
PLUGGABLE
PRINTED CIRCUIT
Metric Pin Spacinga
Tubular Screw Clamp Plug
For plug-in applications where infrequent
wire-to-board connections are made and
a very cost effective pluggable terminal
block is needed.
Multipole assemblies are offered in
modular interlocking design up to 12
poles or single mold construction up to
16 poles. While modular construction
reduces and simplifies inventory, the
single mold design provides maximum
strength.
Modular or Single Mold Design
Wire Protector Standard
Housing Material: Polyamide 6.6
Standard Color: Gray
•
•
•
•
a
Blocks with US (Inch) pin spacing
begin on page 110.
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
Ordering Information
No. of
Poles
Plug, mm Pole Spacing
AK132
AK130
Modular Plug
Single Mold Plug
Pole Spacing 5mm (.197)
Stripping Length 6mm (.236)
Screw Hole Diameter 3.5mm (.138)
Pole Spacing 5mm (.197)
Stripping Length 6mm (.236)
Screw Hole Diameter 3.5mm (.138)
Use with STL130, STL132, STL140 Headers
Use with STL130, STL132, STL140 Headers
Wire Range
0.5-1.5mm2
22-14 AWG
22-14 AWG
Wire Range
0.5-1.5mm2
22-14 AWG
22-14 AWG
Type
Current
10A
10A
10A
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
Std. Pk.
Current
10A
10A
10A
Type
30.302
30.303
30.304
30.305
30.306
30.307
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
AK132/2wp
AK132/3wp
AK132/4wp
AK132/5wp
AK132/6wp
AK132/7wp
30.322
30.323
30.324
30.325
30.326
30.327
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .99)
(1.18)
(1.38)
100
100
50
50
50
30
8
9
10
11
12
13
14
AK130/8wp
AK130/9wp
AK130/10wp
AK130/11wp
AK130/12wp
30.308
30.309
30.310
30.311
30.312
40.00
45.00
50.00
55.00
60.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
30
30
30
20
20
AK132/8wp
AK132/9wp
AK132/10wp
AK132/11wp
AK132/12wp
AK132/13wp
AK132/14wp
30.328
30.329
30.330
30.331
30.332
30.333
30.334
40.00
45.00
50.00
55.00
60.00
65.00
70.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
(2.76)
30
30
30
20
20
20
20
AK132/15wp
AK132/16wp
30.335
30.336
75.00 (2.95)
80.00 (3.15)
20
15
L
13.5mm
➤
➤
Dimensions
in.
0.366
0.425
0.531
2.7mm
5mm
5mm
➤
STL(Z)130
STL(Z)132
144
13.5mm
➤
10.8mm
➤
10.8mm
0.7mm
mm
9.30
10.80
13.50
Std. Pk.
AK130/2wp
AK130/3wp
AK130/4wp
AK130/5wp
AK130/6wp
AK130/7wp
L
in.
0.028
0.106
0.197
Length L
mm (in.)
Cat. No.
2
3
4
5
6
7
15
16
mm
0.70
2.70
5.00
Voltage
250V
300V
300V
9.3mm
2.7mm
➤
➤
STL(Z)130
STL(Z)132
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
9.3mm
➤
PREVIOUS
HOME
NEXT
FIND IT
PLUGGABLE
PRINTED CIRCUIT
Metric Pin Spacinga
Pin Headers
Smaller pin diameter for 1.0mm (.0394")
through-holes
STL130, STL132 (Straight) and STL140
(Right Angle) Pin Headers are used with
the highly cost effective Tubular Screw
Clamp Plugs, Types AK130 and AK132.
in lighter duty applications where
infrequent wire to board connections
must be made. Type STL132 features a
reduced pin diameter of 1.0mm (.0394")
on the soldering side.
STL130
Straight Pin Header
Open pin headers are supplied in strips
up to 16 poles or in standard 24 pole
lengths. The Pin Header strip features
breakaway construction that eliminates
cutting or sawing.
Blocks with US (Inch) pin spacing
begin on page 110.
Pin Spacing 5mm (.197)
Use with AK130 and AK132 Plugs
Use with AK130, AK132 Plugs
Ratings
Current
Voltage
10A
250V
c
10A
300V c
c
c
10A
300V
Length L
Cat. No.
mm (in.)
Std. Pk.
IEC/VDE
(File No. E101811)
(File No. LR68503)
Type
Cat. No.
Voltage
250V
300V c
300V c
Length L
mm (in.)
Std. Pk.
STL130/2
STL130/3
STL130/4
STL130/5
STL130/6
STL130/7
30.352
30.353
30.354
30.355
30.356
30.357
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .98)
(1.18)
(1.38)
100
100
50
50
50
30
STL132/2
STL132/3
STL132/4
STL132/5
STL132/6
STL132/7
32.502
32.503
32.504
32.505
32.506
32.507
10.00 ( .39)
15.00 ( .59)
20.00 ( .79)
25.00 ( .98)
30.00 (1.18)
35.00 (1.38)
8
9
10
11
12
13
14
STL130/8
STL130/9
STL130/10
STL130/11
STL130/12
STL130/13
STL130/14
30.358
30.359
30.360
30.361
30.362
30.363
30.364
40.00
45.00
50.00
55.00
60.00
65.00
70.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
(2.76)
30
30
30
20
20
20
20
STL132/8
STL132/9
STL132/10
STL132/11
STL132/12
STL132/13
STL132/14
32.508
32.509
32.510
32.511
32.512
32.513
32.514
40.00
45.00
50.00
55.00
60.00
65.00
70.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
(2.76)
30
30
30
20
20
20
20
15
16
STL130/15
STL130/16
30.365
30.366
75.00 (2.95)
80.00 (3.15)
20
20
STL132/15
STL132/16
32.515
32.516
75.00 (2.95)
80.00 (3.15)
20
20
24
STL130/24
30.374
120.00 (4.72)
20
STL132/24
32.524
120.00 (4.72)
20
2
3
4
5
6
7
STL140/2
STL140/3
STL140/4
STL140/5
STL140/6
STL140/7
30.472
30.473
30.474
30.475
30.476
30.477
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .98)
(1.18)
(1.38)
100
100
50
50
50
50
8
9
10
11
12
13
14
STL140/8
STL140/9
STL140/10
STL140/11
STL140/12
STL140/13
STL140/14
30.478
30.479
30.480
30.481
30.482
30.483
30.484
40.00
45.00
50.00
55.00
60.00
65.00
70.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
(2.76)
30
30
30
20
20
20
20
15
16
STL140/15
STL140/16
30.485
30.486
75.00 (2.95)
80.00 (3.15)
20
20
24
STL140/24
30.494
120.00 (4.72)
20
➤
Ø1.3mm
Ø1.3mm
➤
➤
➤
➤
STL(Z)140
➤➤
100
100
50
50
50
30
➤ ➤ Ø1.3mm
12.5mm
➤
➤
➤
L
➤
➤
➤
➤
➤
➤
STL(Z)130
c
L
12.5mm
➤ 2mm
➤
11.8mm ➤
➤
5.5mm
➤
➤
2mm
➤ ➤
➤ ➤
➤
3.5mm
2.8mm ➤
➤
2.8mm
L
2mm
➤
➤
➤
Dimensions
mm
in.
mm
in.
1.00
0.039
5.50
0.217
1.30
0.051
6.00
0.236
2.00
0.079
11.80
0.465
2.80
0.110
12.50
0.492
3.50
0.138
15.00
0.591
5.00
0.197
b
To insure proper pin positioning, install header into AK130 or
AK132 Plug before soldering into board
➤
Right Angle Pin Header,
mm Pin Spacing
Type
Current
10A
10A c
10A c
2
3
4
5
6
7
➤
Straight Pin Header,
mm Pin Spacing
No. of
Poles
3.5mm
Ordering Information
Straight Pin Header
Pin Spacing 5mm (.197)
6mm
➤
➤
a
STL132
STL140
Right Angle Pin Header b
• Straight and Right Angle
• Strip Material: Polyamide 6.6
• Standard Color: Gray
➤ ➤ Ø1mm
5mm
Pending, STL140, STL132
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
145
PREVIOUS
HOME
NEXT
FIND IT
STANDARD PLUGGABLE
PRINTED CIRCUIT
Metric Pin Spacinga
Screw-Cage Clamp Plug
For standard industrial plug-in applications where multiple wire-to-board
connections must be made quickly and
simultaneously.
Reduce wiring mistakes, downtime and
facilitate troubleshooting. Simply unplug
defective board and plug in a new one.
Horizontal and Vertical Headers are
available in open and closed end
designs. Refer to pages 148 to 149.
• Multipole, Single Mold Construction
• Industry Standard Compatible
• Locking Tabs Prevent Unplugging
• Optional Keying Prevents Mispluggingb
• Housing Material: Polyamide 6.6
• Standard Color: Green
a
Blocks with US (Inch) pin spacing
begin on page 110.
AK950
Wire Entry in Same Direction as Plug-In
Pole Spacing 5mm (.197)
Stripping Length 7mm (.276)
Screw Hole Diameter 3.5mm (.138)
Use with STL950, STL955 Headers
Wire Range
0.5-2.5mm 2
22-12 AWG
28-14 AWG
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
No. of
Poles
Ordering Information
Plug, mm Pole Spacing
Type
Current
12A
15A
15A
Voltage
250V
300V
300V
Length L
mm (in.)
Cat. No.
Std. Pk.
2
3
4
5
6
7
AK950/2
AK950/3
AK950/4
AK950/5
AK950/6
AK950/7
37.702
37.703
37.704
37.705
37.706
37.707
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .98)
(1.18)
(1.38)
100
100
50
50
50
30
8
9
10
11
12
13
AK950/8
AK950/9
AK950/10
AK950/11
AK950/12
AK950/13
37.708
37.709
37.710
37.711
37.712
37.713
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
14
15
16
17
18
19
AK950/14
AK950/15
AK950/16
AK950/17
AK950/18
AK950/19
37.714
37.715
37.716
37.717
37.718
37.719
70.00
75.00
80.00
85.00
90.00
95.00
(2.76)
(2.95)
(3.15)
(3.35)
(3.54)
(3.74)
20
20
15
15
15
15
20
21
22
23
24
AK950/20
AK950/21
AK950/22
AK950/23
AK950/24
37.720
37.721
37.722
37.723
37.724
100.00
105.00
110.00
115.00
120.00
(3.94)
(4.13)
(4.33)
(4.53)
(4.72)
15
10
10
10
10
L
15mm
3.1mm
17.3mm
Dimensions
mm
2.70
3.10
5.00
b
in.
0.106
0.122
0.197
mm
9.00
15.00
17.30
in.
0.354
0.591
0.681
2.7mm
5mm
9mm
For Keying, refer to Accessories on page 150.
146
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
PREVIOUS
HOME
NEXT
FIND IT
STANDARD PLUGGABLE
PRINTED CIRCUIT
Metric Pin Spacinga
Screw-Cage Clamp Plug
For standard industrial plug-in applications where multiple wire-to-board
connections must be made quickly and
simultaneously.
Two wire entry options increase plug
accessibility. The shape of the plug
facilitates plug-in and removal.
Horizontal and Vertical Headers are
available in open and closed end
designs. Refer to pages 148 to 149.
• Multipole, Single Mold Construction
• Industry Standard Compatible
• Locking Tab Prevents Unplugging
• Optional Keying Prevents Mispluggingb
• Housing Material: Polyamide 6.6
• Standard Color: Green c
a
Blocks with US(inch) spacing
begin on page 110.
Ratings
IEC/VDE
d
d
No. of
Poles
Ordering Information
Plug,
mm Pole Spacing
BU06e
BU08f
Wire Entry Perpendicular to Plug-In
Wire Entry Perpendicular to Plug-In
(On Locking Tab Side)
(On Scalloped Side)
Pole Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 3.5mm (.138)
Pole Spacing 5mm (.197)
Stripping Length 8mm (.315)
Screw Hole Diameter 3.5mm (.138)
Use with STL950, STL955 Headers
Use with STL950, STL955 Headers
Wire Range
0.5-2.5mm2
22-10 AWG
22-10 AWG
Wire Range
0.5-2.5mm 2
22-10 AWG
22-10 AWG
Current
12A
15A
15A
Type
Cat. No.
Voltage
250V
300V
300V
Length L
mm (in.)
Std. Pk.
Type
Current
12A
15A
15A
Voltage
250V
300V
300V
Cat. No.
Length L
mm (in.)
2
3
4
5
6
7
BU06/2
BU06/3
BU06/4
BU06/5
BU06/6
BU06/7
36.202
36.203
36.204
36.205
36.206
36.207
10.00
15.00
20.00
25.00
30.00
35.00
( .39)
( .59)
( .79)
( .98)
(1.18)
(1.38)
100
100
50
50
50
30
BU08/2
BU08/3
BU08/4
BU08/5
BU08/6
BU08/7
36.252
36.253
36.254
36.255
36.256
36.257
10.00 ( .39)
15.00 ( .59)
20.00 ( .79)
25.00 ( .98)
30.00 (1.18)
35.00 (1.38)
8
9
10
11
12
13
BU06/8
BU06/9
BU06/10
BU06/11
BU06/12
BU06/13
36.208
36.209
36.210
36.211
36.212
36.213
40.00
45.00
50.00
55.00
60.00
65.00
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
BU08/8
BU08/9
BU08/10
BU08/11
BU08/12
BU08/13
36.258
36.259
36.260
36.261
36.262
36.263
40.00
45.00
50.00
55.00
60.00
65.00
14
15
16
17
18
19
20
BU06/14
BU06/15
BU06/16
BU06/17
BU06/18
BU06/19
BU06/20
36.214
36.215
36.216
36.217
36.218
36.219
36.220
70.00 (2.76)
75.00 (2.95)
80.00 (3.15)
85.00 (3.35)
90.00 (3.54)
95.00 (3.74)
100.00 (3.94)
20
20
15
15
15
15
15
BU08/14
BU08/15
BU08/16
BU08/17
BU08/18
BU08/19
BU08/20
36.264
36.265
36.266
36.267
36.268
36.269
36.270
L
➤
12.5mm
➤
➤
➤
L
➤
100
100
50
50
50
30
(1.58)
(1.77)
(1.97)
(2.17)
(2.36)
(2.56)
30
30
30
20
20
20
70.00 (2.76)
75.00 (2.95)
80.00 (3.15)
85.00 (3.35)
90.00 (3.54)
95.00 (3.74)
100.00 (3.94)
20
20
15
15
15
15
15
12.5mm
➤
➤
➤
➤
➤
Std. Pk.
Dimensions
in.
0.492
1.043
26.5mm
mm
12.50
26.50
e
Available late 1995
8.3mm
➤ ➤ 5mm
➤
For Keying, please refer to Accessories, page 150.
Gray available, please consult Altech
Pending
➤ ➤ 5mm
f
➤
➤
d
➤
c
➤
➤
b
8.3mm
in.
0.197
0.327
26.5mm
mm
5.00
8.30
Available late 1995
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
147
PREVIOUS
HOME
NEXT
FIND IT
PLUGGABLE
PRINTED CIRCUIT
Metric Pin Spacinga
Headers
Horizontal or vertical headers offer
different wire entry options and enhance
plug accessibility. Closed end headers
prevent misplugging.
• Multipole, Single Mold Construction
• Industry Standard Compatible
• Horizontal and Vertical
• Open and Closed Ends
• Housing Material: Polyamide 6.6
• Standard Color: Green
Blocks with US (Inch) pin spacing
begin on page 110.
Pin Spacing 5mm (.197)
Use with AK950, BU06, BU08 Plugs
Use with AK950, BU06, BU08 Plugs
Current
12A
15A
15A
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
No. of
Poles
Current
12A
15A
15A
Voltage
250V
300V
300V
Cat. No.
Length L
mm (in.)
Std. Pk.
100
100
50
50
50
30
Voltage
250V
300V
300V
Cat. No.
Length L
mm (in.)
Std. Pk.
STL950/2-o
STL950/3-o
STL950/4-o
STL950/5-o
STL950/6-o
STL950/7-o
37.352
37.353
37.354
37.355
37.356
37.357
9.80 ( .39)
14.80 ( .58)
19.80 ( .78)
24.80 ( .98)
29.80 (1.17)
34.80 (1.37)
100
100
50
50
50
30
Type
2
3
4
5
6
7
STL950/2-w
STL950/3-w
STL950/4-w
STL950/5-w
STL950/6-w
STL950/7-w
37.552
37.553
37.554
37.555
37.556
37.557
11.20 ( .44)
16.20 ( .64)
21.20 ( .84)
26.20 (1.03)
31.20 (1.23)
36.20 (1.43)
8
9
10
11
12
13
STL950/8-w
STL950/9-w
STL950/10-w
STL950/11-w
STL950/12-w
STL950/13-w
37.558
37.559
37.560
37.561
37.562
37.563
41.20
46.20
51.20
56.20
61.20
66.20
(1.62)
(1.82)
(2.02)
(2.21)
(2.41)
(2.61)
30
30
30
20
20
20
STL950/8-o
STL950/9-o
STL950/10-o
STL950/11-o
STL950/12-o
STL950/13-o
37.358
37.359
37.360
37.361
37.362
37.363
39.80
44.80
49.80
54.80
59.80
64.80
(1.57)
(1.76)
(1.96)
(2.16)
(2.35)
(2.55)
30
30
30
20
20
20
14
15
16
17
18
19
STL950/14-w
STL950/15-w
STL950/16-w
STL950/17-w
STL950/18-w
STL950/19-w
37.564
37.565
37.566
37.567
37.568
37.569
71.20
76.20
81.20
86.20
91.20
96.20
(2.80)
(3.00)
(3.20)
(3.39)
(3.59)
(3.79)
20
20
15
15
15
15
STL950/14-o
STL950/15-o
STL950/16-o
STL950/17-o
STL950/18-o
STL950/19-o
37.364
37.365
37.366
37.367
37.368
37.369
69.80
74.80
79.80
84.80
89.80
94.80
(2.75)
(2.95)
(3.14)
(3.34)
(3.54)
(3.73)
20
20
15
15
15
15
20
21
22
23
24
STL950/20-w
STL950/21-w
STL950/22-w
STL950/23-w
STL950/24-w
37.570
37.571
37.572
37.573
37.574
101.20
106.20
111.20
116.20
121.20
(3.98)
(4.18)
(4.38)
(4.57)
(4.77)
15
10
10
10
10
STL950/20-o
STL950/21-o
STL950/22-o
STL950/23-o
STL950/24-o
37.370
37.371
37.372
37.373
37.374
99.80
104.80
109.80
114.80
119.80
(3.93)
(4.13)
(4.32)
(4.52)
(4.72)
15
10
10
10
10
➤
12mm
7.9mm
➤
➤
➤
➤
3.5mm
L
➤
➤
➤
➤
3.5mm
➤
12mm
8.4mm
➤
➤
7.9mm
➤
➤
L
➤
➤
Header, mm Pin Spacing
Type
➤
Ordering Information
Horizontal - Open Ends
Pin Spacing 5mm (.197)
8.4mm
a
STL950-O
STL950-W
Horizontal - Closed Ends
148
mm
5.00
7.90
8.40
12.00
in.
0.197
0.311
0.331
0.472
➤
in.
0.390
0.079
0.138
0.150
0.154
➤
Dimensions
mm
1.00
2.00
3.50
3.80
3.90
5mm
➤
➤ ➤ ➤ 1mm
➤ ➤
2mm
5mm
➤
➤ ➤ ➤ 1mm
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
➤ ➤
2mm
➤
PREVIOUS
HOME
NEXT
STL955-W
STL955-O
Vertical - Closed Ends
Vertical - Open Ends
Pin Spacing 5mm (.197)
Pin Spacing 5mm (.197)
Use with AK950, BU06, BU08 Plugs
Use with AK950, BU06, BU08 Plugs
Current
12A
15A
15A
Cat. No.
STL955/2-w
STL955/3-w
STL955/4-w
STL955/5-w
STL955/6-w
STL955/7-w
37.602
37.603
37.604
37.605
37.606
37.607
11.20 ( .44)
16.20 ( .64)
21.20 ( .84)
26.20 (1.03)
31.20 (1.23)
36.20 (1.43)
STL955/8-w
STL955/9-w
STL955/10-w
STL955/11-w
STL955/12-w
STL955/13-w
37.608
37.609
37.610
37.611
37.612
37.613
41.20
46.20
51.20
56.20
61.20
66.20
STL955/14-w
STL955/15-w
STL955/16-w
STL955/17-w
STL955/18-w
STL955/19-w
37.614
37.615
37.616
37.617
37.618
37.619
STL955/20-w
STL955/21-w
STL955/22-w
STL955/23-w
STL955/24-w
37.620
37.621
37.622
37.623
37.624
L
Cat. No.
STL955/2-o
STL955/3-o
STL955/4-o
STL955/5-o
STL955/6-o
STL955/7-o
37.402
37.403
37.404
37.405
37.406
37.407
9.80 ( .39)
14.80 ( .58)
19.80 ( .78)
24.80 ( .98)
29.80 (1.17)
34.80 (1.37)
(1.62)
(1.82)
(2.02)
(2.21)
(2.41)
(2.61)
30
30
30
20
20
20
STL955/8-o
STL955/9-o
STL955/10-o
STL955/11-o
STL955/12-o
STL955/13-o
37.408
37.409
37.410
37.411
37.412
37.413
39.80
44.80
49.80
54.80
59.80
64.80
(1.57)
(1.76)
(1.96)
(2.16)
(2.35)
(2.55)
30
30
30
20
20
20
71.20
76.20
81.20
86.20
91.20
96.20
(2.80)
(3.00)
(3.20)
(3.39)
(3.59)
(3.79)
20
20
15
15
15
15
STL955/14-o
STL955/15-o
STL955/16-o
STL955/17-o
STL955/18-o
STL955/19-o
37.414
37.415
37.416
37.417
37.418
37.419
69.80
74.80
79.80
84.80
89.80
94.80
(2.75)
(2.95)
(3.14)
(3.34)
(3.54)
(3.73)
20
20
15
15
15
15
101.20
106.20
111.20
116.20
121.20
(3.98)
(4.18)
(4.38)
(4.57)
(4.77)
15
10
10
10
10
STL955/20-o
STL955/21-o
STL955/22-o
STL955/23-o
STL955/24-o
37.420
37.421
37.422
37.423
37.424
99.80
104.80
109.80
114.80
119.80
(3.93)
(4.13)
(4.32)
(4.52)
(4.72)
15
10
10
10
10
8.4mm
➤
➤
➤
Type
➤
L
➤ ➤
➤
12mm
12mm
1mm
➤
➤
➤
7.9mm
➤
➤
➤
3.8mm
5mm
➤
3.9mm
➤
100
100
50
50
50
30
8.4mm
➤
➤
➤
➤
➤
➤
3.9mm
➤
5mm
Voltage
250V
300V
300V
Length L
mm (in.)
Std. Pk.
100
100
50
50
50
30
➤
➤
Current
12A
15A
15A
➤
Type
Voltage
250V
300V
300V
Length L
mm (in.)
Std. Pk.
FIND IT
➤
➤ ➤
3.8mm
➤
➤
7.9mm
➤
➤
1mm
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
149
PREVIOUS
HOME
NEXT
FIND IT
PRINTED CIRCUIT
ACCESSORIES
Convenient options that facilitate wire
termination and increase wiring efficiency.
KEYING INSERTS
Use KI Keying Inserts to prevent
misplugging of screw-cage clamp plugs
in adjoining headers without loss of
position. Incorrect plug installation can
cause serious electrical damage to
sensitive electronic circuits.
KI
KEYING INSERTS
Type KI-AK Keying Insert is a precision
molded profile that installs into parallel
slots provided on the plug housing. Type
KI-STL is a similar insert that installs into
slots molded into the header housing.
Cat. No.
KI-AK
37.903
50/300
➤
➤
Character
Imprint
Type
Cat. No.
AK950
AKZ950
AKZ1200
BU06
BU08
BU02
BU04
1 - 12
13 - 24
12 - 1
Blank
KSO112
KSO1324
KSO121
KSO00
30.096
30.097
30.098
30.099
3.1mm
➤
➤
Keying Inserts install quickly and easily
and are held securely in place by a
friction fit. You devise the pattern and
select the quantity of inserts required for
your application.
Type
Use With
Types
8mm
When two of these inserts are located in
corresponding slots on both the plug and
header, the pair cannot be joined
because the inserts interfere with one
another. If the inserts are installed into
separate slots on the plug and header,
the pair will engage as usual.
Std. Pk.
Wheels/
Inserts
KSO
MARKING LABELS
Packaged for convenient handling KI-AK
and KI-STL Inserts are supplied on
wheels of 6 inserts.
Factory keyed plugs and headers are
available, please consult Altech with
your keying requirements. Color: Red.
Molding Material: Polyamide 6.6.
MARKING LABELS
KI-STL 37.904
50/300
➤
➤
STL950
STL955
STLZ950
STLZ955
STLZ990
3.1mm
➤
10mm
➤
Use KSO preprinted pressure sensitive
labels for printed circuit board applications where changing requirements
make it impractical to order and inventory hot stamp imprinted terminal blocks.
Preprinted labels are quick and easy to
apply to all Fixed and Pluggable Printed
Circuit Terminal Blocks. Simply cut to
required length and peel strip from card.
Apply the strip to the terminal block by
exerting finger pressure.
Marking cards contain 25 strips and are
available in several standard number
combinations. Select from consecutive
ascending numbers 1 - 12, 13 - 24;
consecutive descending numbers 12 - 1;
and blank for hand marking. Custom
Marking Labels with special character
imprints are also available upon request.
Imprint is black on white labels. Material:
White PVC.
150
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
Std. Pk.
Cards/
Strips
5/125
5/125
5/125
5/125
PREVIOUS
HOME
NEXT
FIND IT
PRINTED CIRCUIT
ACCESSORIES
HOT STAMP IMPRINTING
iA
(1, 2, 3, 4, ...)
Consecutive, Ascending,
Left to Right
1
2
3
4
iB
(... 4, 3, 2, 1)
Consecutive, Descending
Left to Right
4
3
2
1
(1, 2, 3, 4, ...)
Upside Down, Consecutive
Descending, Left to Right
(... 4, 3, 2, 1)
Updside Down, Consecutive
Ascending, Left to Right
3
4
Hot Stamp Imprints up to 12 poles are
standard for US (inch) and metric (mm)
spacings. For pricing purposes, they are
considered to be one assembly.
1
Standard Imprints can be specified and
ordered by adding the required suffix
after the Cat. No. and Type designation.
Simply select the appropriate Ordering
Suffix for the required Imprint Sequence.
iD
2
Imprint Ordering
iC
4
Standard Imprint
• Character Style - DAVID
• Character Size: 8 Pt.,
2.4mm (3/32 in.) high
• Standard Imprint Color: Black on Green
Housing; White on Gray Housing
• Optional Imprint Color: White on Green
Housing
Illustration
3
Standard or custom imprint sequences
are available for 2 to 24 pole positions.
Imprints are centered above the wire
entry.
Imprint Description
2
Hot Stamp Imprinting provides a
permanent marking which will not rub,
wear or wash off even when solvents are
present.
STANDARD IMPRINT
Ordering
Imprint
Suffix
Sequence
1
For high volume requirements or when it
is impractical to apply PSA Marking
Labels, use Hot Stamp Imprinting to
provide positive circuit identification for
Fixed and Pluggable Printed Circuit
Terminal Blocks. Properly identified
circuits increase wiring efficiency, save
installation time and make wire hook-up,
system modifications and trouble
shooting quick and easy.
Standard Imprint Example:
13 pole, Type AKZ350 Printed Circuit Terminal Block to be imprinted upside down
with descending, consecutive numbers reading left to right should be ordered as
below:
Type
AKZ350/13iC
Cat. No.
32.063iC
Imprints with 13-24 poles are considered
to be (2) assemblies. For pricing
purposes, they are considered to be two
assemblies.
Consult Altech for Hot Stamp Imprinting
pricing, minimum order quantities and
applicable lot charges.
Custom Imprints
Special number sequences and character
combinations including letters, symbols
and numbers are available. To order
special sequences or combinations send
us your imprint schedule. For die charges
and minimum order quantities for your
custom imprints, please consult Altech.
Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
151