PREVIOUS HOME NEXT FIND IT FIXED PRINTED CIRCUIT Metric Pin Spacinga Screw-Cage Clamp Minimum clearance, small footprint conserves valuable PCB real estate For wire-to-board connections in industrial applications and where frequent wire terminations occur. • Multipole, Modular Design • Housing Material: Polyamide 6.6 • Standard Color: AK300 is Gray, all others are green Ratings IEC/VDE (File No. E101811) (File No. LR68503) No. of Poles Terminal Block, mm Pin Spacing Pin Spacing 5.08mm (.200)c Stripping Length 7mm (.276) Screw Hole Diameter 3.5mm (.138) Wire Range 0.5-2.5mm 2 22-12 AWG 22-12 AWG Wire Range 0.5-1.5mm2 28-14 AWG 28-14 AWG Type AK300/2 AK300/3 AK300/4 AK300/5 AK300/6 AK300/7 30.602 30.603 30.604 30.605 30.606 30.607 10.00 15.00 20.00 25.00 30.00 35.00 ( .39) ( .59) ( .79) ( .99) (1.18) (1.38) 100 100 50 50 50 30 8 9 10 11 12 13 AK300/8 AK300/9 AK300/10 AK300/11 AK300/12 AK300/13 30.608 30.609 30.610 30.611 30.612 30.613 40.00 45.00 50.00 55.00 60.00 65.00 (1.58) (1.77) (1.97) (2.17) (2.36) (2.56) 30 30 30 20 20 20 14 15 16 17 18 19 AK300/14 AK300/15 AK300/16 AK300/17 AK300/18 AK300/19 30.614 30.615 30.616 30.617 30.618 30.619 70.00 75.00 80.00 85.00 90.00 95.00 (2.76) (2.95) (3.15) (3.35) (3.54) (3.74) 20 20 15 15 15 15 20 21 22 23 24 AK300/20 AK300/21 AK300/22 AK300/23 AK300/24 30.620 30.621 30.622 30.623 30.624 100.00 105.00 110.00 115.00 120.00 (3.94) (4.13) (4.33) (4.53) (4.72) 15 10 10 10 10 Dimensions mm 5.00 5.08 6.50 8.10 9.00 10.00 10.50 12.50 13.50 15.00 15.24 19.00 Std. Pk. 2 3 4 5 6 7 2.7mm ➤ in. 0.020 0.024 0.031 0.035 0.039 0.071 0.098 0.106 0.118 0.138 0.157 0.173 0.177 Voltage 250V 300V 300V Length L mm (in.) Cat. No. ➤ mm 0.50 0.60 0.80 0.90 1.00 1.80 2.50 2.70 3.00 3.50 4.00 4.40 4.50 Current 16A 15A 15A in. 0.197 0.200 0.256 0.319 0.354 0.394 0.413 0.492 0.531 0.591 0.600 0.748 L ➤ ➤ ➤ 0.6mm ➤ 1mm ➤ ➤ 5mm ➤ ➤ Current 16A 15A 15A Type AK(Z)250/2 AK(Z)250/3 AK(Z)250/4 AK(Z)250/5 AK(Z)250/6 Voltage 250V 300V 300V Length L mm (in.) Cat. No. 32.402 32.403 32.404 32.405 32.406 10.16 15.24 20.32 25.40 30.48 Std. Pk. (.40) (.60) (.80) (1.00) (1.20) 100 100 50 50 50 0.6mm ➤ 12.5mm ➤ L ➤ 1.8mm Ordering Information Pin Spacing 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3.5mm (.138) 8.1mm ➤ 10mm Blocks with US (Inch) pin spacing begin on page 110. AK(Z)250 Front Wire Entry 4.5mm ➤ ➤➤ 12.5mm ➤ a AK300 45˚ Wire Entry 3.5mm 0.8mm 2.5mm ➤ ➤ 6.5mm ➤ ➤ 1mm c 0.5mm ➤ ➤ 4mm ➤ ➤ Appropriate for use in metric pin spacings up to the number of poles shown. 138 Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490