CRIMPER SELECTOR GUIDE Ferrule and Wire Size by Crimper Type Use this Selector Guide to determine ferrule and wire sizes which can be crimped. Refer to ordering pages 94-97 for additional selection and ordering information. 1. Determine the wire size(s) to be used. 2. Select the appropriate ferrule size(s).1 3. Based on the ferrule size, choose the crimper type appropriate for use. 4. Select the crimper style best suited for your application. CRIMPER STYLES UNIVERSAL FERRULE CRIMPER 26 .14 24 22 20 20 18 16 14 12 10 8 6 4 2 1 2/0 3/0 4/0 250MCM .25 .34 .50 .75 1.00 1.50 2.50 4.00 6.00 10.00 16.00 25.00 35.00 50.00 70.00 95.00 120.00 150.00 X X X VISE MOUNT FERRULE CRIMPER G FC F E1 r Ty p 10 .0 e 00 E1 10 .0 E1 05 10 .0 10 E1 10 .0 15 E1 10 .0 20 AC T2 .5 AC P 2 T1 0P AC T2 .5 AC T-P 2 T1 0T -P Cr im pe Ferrule Size mm2 Wire Size AWG PNEUMATIC FERRULE CRIMPER X X X X X X X X X X Dual Wire Ferrules E110.000 crimper covers 2x20 to 2x12 AWG dual wire ferrules E110.010 crimper covers 2x10 to 2x8 AWG dual wire ferrules E110.015 crimper covers 2x6 AWG dual wire ferrules Key: = Multi-Cavity Range X = Individual Cavity 1 2 98 To insure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire. Insulated ferrule/wire size range is shown, uninsulated ferrule range is 16-14 AWG (1.50 - 2.5mm2). Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com