Application Tooling Manual PPDLH FEATURES AND SPECIFICATIONS Features and Benefits 19286-0065 Putt Pump DielessHead Crimper for Insulated and Non-Insulated Terminals and Splices Specifications Pneumatic: Supply Pressure –100 PSI Air Pressure –125 PSI max. Cycle Time: 15 secon n C rimps a wide range of products and does not require die set changes, which reduces the overall cost and provides production flexibility n S wivel base and terminal locator included to provide the operator with a user-friendly tool to increase productivity n C omplete lightweight system that allows tool to be moved and stored easily ORDERING INFORMATION Order No. Wire Gauge (AWG) Operating Pressure* 19286-0065 8 40 PSI 19286-0065 6 45 PSI 19286-0065 4 50 PSI 19286-0065 2 55 PSI 19286-0065 1 65 PSI 19286-0065 1/0 65 PSI 19286-0065 2/0 70 PSI 19286-0065 3/0 75 PSI 19286-0065 4/0 75 PSI 19286-0065 250MCM 85 PSI 19286-0065 300MCM 90 PSI 19286-0065 350MCM 90 PSI 19286-0065 400MCM 100 PSI 19286-0065 500MCM 100 PSI * The pressure settings shown in the chart refer to the SPX power team pump that is currently shipped with the PPDLH tool. Please review the instructions sent with your specific tool. Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX [email protected] Order No. DHL-0024 Rev. 1 Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 [email protected] Far East South Headquarters Jurong, Singapore 65-6-268-6868 [email protected] Visit our website at www.molex.com Printed in USA/500/JI/JI/2006.05 European Headquarters Munich, Germany 49-89-413092-0 [email protected] Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 ©2006, Molex