Tools Universal Ferrule Crimper Front Conductor Entry One die crimps a wide range of insulated and uninsulated ferrule sizes. Three Universal Ferrule Crimpers are offered to crimp different ferrule and wire size ranges up to 16mm2 (6 AWG). Universal Ferrule Crimper • Positive ratcheting with spring return • Trapezoidal crimp geometry • Comfort grip plastic handle • Hardened steel frame, matte black Universal Ferrule Crimper Universal Ferrule Crimper Part No. Wire/ AWG Ferrule mm2 Std. Pk. Part No. Wire/ AWG Ferrule mm2 Std. Pk. Part No. Wire/ AWG Ferrule mm2 Std. Pk. E110.000 26 - 10 0.14 - 6 1 E110.005 20 - 8 0.5 - 10 1 E110.010 8-6 10 - 16 1 Replacement Spring Set: 185140008 Handle Spring Set 318001002 Rachet Spring Replacement Spring Set: 185140008 Handle Spring Set 318001002 Rachet Spring Replacement Spring Set: 185140008 Handle Spring Set 318001002 Rachet Spring Ferrule Crimper Side Conductor Entry • Positive ratcheting with spring return • Emergency release • Trapezoidal crimp geometry • Comfort grip plastic handle • Hardened steel frame, matte black Individual crimp cavities conform to industry standard insulated and uninsulated ferrules from 25-50mm2 (4-1 AWG). Ferrule Crimper 124 Ferrule Crimper Ferrule Crimper Part No. Wire/ AWG Ferrule mm2 Std. Pk. Part No. Wire/ AWG Ferrule mm2 Std. Pk. E110.015 4-2 25 - 35 1 E110.020 1 50 1 Part No. Wire/ AWG Ferrule mm2 Std. Pk. 22.030 2/0-250 MCM 70 - 150 1 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Pneumatic Crimping Tool Altech's pneumatic crimping tools speed the crimping process of insulated or uninsulated ferrules for a wide range of wire sizes up to 8 AWG. Altech pneumatic crimpers are simple and easy to use. Just install the ferrule over the end of the stripped wire and insert it into either the front or side tool opening. Then touch the actuating lever or push the footswitch pedal to initiate the crimp cycle. Once the head closes it will automatically reopen after crimping. The resulting crimp features a compact trapezoidal cross section which is mechanically very strong and provides a large surface to insure a highly efficient electrical contact. Crimp ferrules efficiently and economically. A unique dual crimping head provides convenient front or side wire entry, allowing crimping from multiple positions. This features makes crimping in tight places simple. Choose either lever actuated, hand held units or hands-free footswitch operated table top models, in two basic tool sizes. Hand held models feature a flexible coil air-hose with 1/4" NPT interchange connector for quick hookup with a standard push-to-connect coupler. The table top units also include a flexible coil air hose to the footswitch and a 1/4" NPT interchange located on the footswitch for one hand push-to-connect supply hook-up. They feature a sturdy metal base with integral table clamp and dual storage trays for quick access to the ferrule supply. The air release port on the footswitch has been quieted with a sintered bronze air silencer. The footswitch has a metal frame and a tough fiberglass shroud. Its spring return pedal provides for short actuating cycles. Wire/ Ferrule Size AWG mm2 Type Cat. No. Tool Wt. g (lbs.) Std. Pk. Hand Held Crimper with Actuating Lever Crimp Insulated Ferrules and Uninsulated Ferrules ACT2.5-P 0.25-2.5 22.014 430 (.95) 1 24-14 Hand Held Crimper with Actuating Lever Crimp Insulated Ferrules and Uninsulated Ferrules ACT10-P 4.0-10.0 22.015 430 (.95) 1 12-8 Table Top Crimper with Footswitch and Storage Trays Crimp Insulated Ferrules 24-14 and Uninsulated Ferrules ACT2.5-T 0.25-2.5 22.016 1000 (2.20) 1 Table Top Crimper with Footswitch and Storage Trays Crimp Insulated Ferrules 12-8 and Uninsulated Ferrules ACT10-P 4.0-10.0 22.017 1000 (2.20) 1 Magnetic Mounting Holder for hand held pneumatic crimpers ACT-DXP 22.018 --- 1 Counterbalance for hand held pneumatic crimpers CT-DUP 22.019 --- 1 Tool Optional items for the hand held crimper include a counterbalance for maximum control and a magnetic holder for storage. • Operates on 60 - 90 psi air supply • Crimp insulated and uninsulated ferrules • Trapezoidal crimp geometry • Flexible coil air hose with 1/4" NPT interchange • Metal tool body and base • Hardened steel crimp head Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 125