HDD60 SERIES DC - DC CONVERTER 60W SINGLE OUTPUT FEATURES ‧EFFICIENCY UP TO 88% ‧2:1 WIDE INPUT RANGE ‧I/O ISOLATION ‧SHORT CIRCUIT PROTECTION ‧HIGH PERFORMANCE ‧3 YEARS WARRANTY MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (Typ.) Single Output Models HDD60 - 12S05-X 9~18 VDC 60 WATTS + 5 VDC 12000 mA 79% 81% HDD60 - 12S12-X 9~18 VDC 60 WATTS + 12 VDC 5000 mA 82% 84% HDD60 - 12S15-X 9~18 VDC 60 WATTS + 15 VDC 4000 mA 82% 84% HDD60 - 12S24-X 9~18 VDC 60 WATTS + 24 VDC 2500 mA 84% 86% HDD60 - 24S05-X 18~36 VDC 60 WATTS + 5 VDC 12000 mA 80% 82% HDD60 - 24S12-X 18~36 VDC 60 WATTS + 12 VDC 5000 mA 84% 86% HDD60 - 24S15-X 18~36 VDC 60 WATTS + 15 VDC 4000 mA 84% 86% HDD60 - 24S24-X 18~36 VDC 60 WATTS + 24 VDC 2500 mA 85% 87% HDD60 - 48S05-X 36~72 VDC 60 WATTS + 5 VDC 12000 mA 83% 85% HDD60 - 48S12-X 36~72 VDC 60 WATTS + 12 VDC 5000 mA 85% 87% HDD60 - 48S15-X 36~72 VDC 60 WATTS + 15 VDC 4000 mA 85% 87% HDD60 - 48S24-X 36~72 VDC 60 WATTS + 24 VDC 2500 mA 86% 88% ‧SUFFIX "X=P" : PCB MOUNTING TYPE, HEAT SINK WILL BE ADDED ON MODULE. ‧SUFFIX "X=T" : CHASSIS MOUNTING TYPE:(TERMINAL BLOCK), NO HEAT SINK. USE CHASSIS AS HEAT SINK OR FAN FORCE COOLING. INDICATE SUFFIX WHEN ORDER. www.chinfa.com 2014.09.12 [email protected] P1 HDD60 SERIES SINGLE OUTPUT SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Characteristics Conditions typ. min. max. 80 unit Switching frequency Vi nom, Io nom Isolation voltage Input - Output 1,500 VDC Isolation resistance Input - Output, @ 500VDC 100 MΩ Ambient temperature Operating at Vi nom, Io nom -40 Case temperature Operating at Vi nom, Io nom Derating Vi nom Storage temperature Non operational -40 +100 Relative humidity Vi nom, Io nom 20 95 Temperature coefficient Vi nom, Io min + 71 o +100 o C C % / oC See derating curve o C % RH % / oC Dimension Cooling KHz L88.9 x W139.7 x H35.6 for "P" type mm L88.9 x W139.7 x H32.9 for "T" type mm Free air convection INPUT SPECIFICATIONS Characteristics Input voltage range min. typ. max. unit 9 12 18 VDC 18 24 48 36 VDC 72 VDC 12V 20 mA 24V 15 mA 48V 10 mA 12V 20 VDC 24V 40 75 VDC max. unit Conditions Ta min ... Ta max, Io nom 36 No load input current Input voltage w/o damage Vi nom, Io = 0 Io nom 48V Input filter VDC Pi type OUTPUT SPECIFICATIONS Characteristics Output voltage accuracy Conditions min. typ. Vi nom, Io nom Minimum load Vi nom Line regulation Io nom, Vi min ...Vi max Load regulation Vi nom, Io 0 ...Io nom Transient recovery time Vi nom, 1~0.5 Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Voltage trim range Vi nom Efficiency Vi nom, Io nom, Po / Pi % % 0 % % s 500 Vout x 1% mV % Up to 88%, See model list CONTROL AND PROTECTION Remote ON / OFF ON: opened or +5.5VDC applied, reference to input GND OFF: -1.8VDC applied, reference to input GND Input reversed Output short circuit Shunt diode built in, external fuse recommended Current limited (Auto-recovery) PHYSICAL CHARACTERISTICS Case size 88.9 x 139.7 x 35.6 mm (3.5 x 5.5 x 1.4 inches) for "P" type Case material Weight Metal Case / PCB base 690 g for "P" type / 570 g for "T" type Potting material Epoxy 88.9 x 139.7 x 32.9 mm (3.5 x 5.5 x 1.29 inches) for "T" type www.chinfa.com 2014.09.12 [email protected] P2 HDD60 SERIES SINGLE OUTPUT MECHANISM & PIN CONFIGURATION REMOTE ON / OFF CONTROL EXTERNAL OUTPUT TRIMMING 12 TERMINAL 6 CONTROL LOGIC COMPATIBILITY : ..............OPEN COLLECTOR TTL CONTROL VOLTAGE. ON +5.5V MIN. OR OPEN CIRCUIT. OFF ......+1.8V MAX. CONVERTER SHUTDOWN IDLE CURRENT ..............10 mA CONTROL COMMON ..........................INPUT TERMINAL 2 or 13 14 6.35 [0.25] TP 4-40 x 4 139.70 [5.50] PCB Mounting Type Suffix P 19.05 [0.75] 22.35 [0.88] 5.59 [0.22] DIA 1.5 [0.06] 109.22 [4.30] Trim Down 14 2 3 4 5 6 7 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] Trim Up 13 Trim Down Case : P type 13.26 [0.52] 12 Trim Up 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 8 9 10 11 12 13 14 6.35 [0.25] 15.24 [0.60] BOTTOM VIEW 6.35 [0.25] Case : T type 139.70 [5.50] Terminal Block Type Suffix T 2 3 4 5 6 7 19.05 [0.75] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 22.35 [0.88] 10.5 [0.41] 109.22 [4.30] 9.53 [0.37] 8 9 10 11 12 13 14 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 9.53 [0.37] 6.35 [0.25] 15.24 [0.60] BOTTOM VIEW PIN ASSIGNMENT GENERAL PIN NO. 1 2&3 4&5 6 7 PIN NO. 8&9 10 & 11 12 13 14 SINGLE NO PIN Vi Vi + Remote ON/OFF control N. C. CIRCUIT SCHEMATIC SINGLE Vo Vo + SENSOR Trim SENSOR + DERATING 쌰Block diagram for HDD60 series with single output Vo + Switching Device Rectifier S+ Vo - Vi - PWM Controller ON / OFF Opto Isolation Reference & Error Amp. 100 Power out [ % ] Vi + Safe Operating Area STrim 0 -40 71 100 Ambient Temperature [ oC ] www.chinfa.com 2014.09.12 [email protected] P3