® MCWI05 SERIES DC/DC CONVERTER 5W, SIP-Package FEATURES ►Very high Power Density ►Small SIP-8 Package: 21.8 x 9.3 x 11.2 mm ►Ultra-wide 4:1 Input Voltage Range ►Fully regulated Single- and Dual-Output Models ►No Min. Load Requirement ►Low Stand-by Power Consumption ►Operating Temp.Range -40°C to +75°C ►I/O- Isolation 1500VDC ►Remote ON/OFF Control ►Safety Approval to UL/cUL/IEC/EN 60950-1 ►3 Years Product Warranty PRODUCT OVERVIEW The MINMAX MCWI05 series is a new range of isolated 5W DC/DC converter modules featuring fully regulated output voltages and ultra-wide 4:1 input voltage ranges.The converters come in a very small SIP-8 package which occupies only 2.0 cm2 of PCB space.An excellent efficiency allows operating temperatures up to +65°C without power derating.Further features include remote ON/OFF. The very low stand-by power consumption makes these converter modules an ideal solution for applications in battery powered equipment and instrumentation. Model Selection Guide Model Input Output Number Voltage Voltage Output Current (Range) Input Current Max. capacitive Load Efficiency (typ.) Max. @Max. Load @No Load VDC mA mA(typ.) mA(typ.) μF % 3.3 1075 389 1000 76 MCWI05-12S05 5 1000 514 1000 81 MCWI05-12S12 12 417 502 220 83 15 334 503 100 83 24 209 510 100 82 MCWI05-12D12 ±12 ±209 516 100# 81 MCWI05-12D15 ±15 ±167 509 47# 82 MCWI05-24S033 3.3 1075 194 1000 76 MCWI05-24S05 5 1000 257 1000 81 MCWI05-24S12 12 417 251 220 83 15 334 249 100 84 24 209 252 100 83 MCWI05-24D12 ±12 ±209 255 100# 82 MCWI05-24D15 ±15 ±167 255 47# 82 MCWI05-48S033 3.3 1075 97 1000 76 MCWI05-48S05 5 1000 130 1000 80 MCWI05-48S12 12 417 126 220 83 15 334 124 100 84 24 209 127 100 82 MCWI05-48D12 ±12 ±209 127 100# 82 MCWI05-48D15 ±15 ±167 126 47# 83 VDC MCWI05-12S033 MCWI05-12S15 MCWI05-12S24 MCWI05-24S15 MCWI05-24S24 MCWI05-48S15 MCWI05-48S24 12 (4.5 ~ 18) 24 (9 ~ 36) 48 (18 ~ 75) 60 30 20 @Max. Load # For each output E-mail:[email protected] 2014/11/04 P2 Tel:886-6-2923150 Page 1 of 4 ® MCWI05 SERIES DC/DC CONVERTER 5W, SIP-Package Input Specifications Parameter Model 12V Input Models 24V Input Models 48V Input Models 12V Input Models 24V Input Models 48V Input Models 12V Input Models 24V Input Models 48V Input Models Input Surge Voltage (1 sec. max.) Start-Up Threshold Voltage Under Voltage Shutdown Short Circuit Input Power Internal Filter Type All Models Min. -0.7 -0.7 -0.7 --------------- Typ. Max. 36 --50 --100 ----4.5 --9 --18 --4 --8 --16 --2500 Capacitor type Unit Min. Typ. Max. Unit --- --- ±2.0 %Vnom. % VDC mW Output Specifications Parameter Conditions Output Voltage Setting Accuracy Output Voltage Balance Dual Output, Balanced Loads --- ±1.0 ±2.0 Line Regulation Vin=Min. to Max. @Full Load --- ±0.3 ±0.5 % Load Regulation Io=0% to 100% --- ±0.5 ±1.0 % 100 mV P-P μsec Minimum Load No minimum Load Requirement Ripple & Noise 0-20 MHz Bandwidth Transient Recovery Time 25% Load Step Change Transient Response Deviation Temperature Coefficient Output Short Circuit --- --- --- 500 --- --- ±3 ±5 % --- ±0.01 ±0.02 %/℃ Continuous General Specifications Parameter Conditions Min. Typ. Max. Unit 60 Seconds 1500 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 250 --- pF 100 --- --- KHz I/O Isolation Voltage Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Safety Approvals(pending) 2,400,000 Hours UL/cUL 60950-1 recognition (CSA certificate), IEC/EN 60950-1(CB-report) Remote On/Off Control Parameter Conditions Min. Converter On Typ. Max. Unit --- mA Open or high impedance Converter Off 2~4mA current applied via 1Kohm resistor Standby Input Current Supply Off & Nominal Vin --- 2.5 Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Conditions Min. Max. Unit Natural Convection -40 +75 ℃ ℃ Case Temperature --- +90 Storage Temperature Range -55 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Free-Air convection Lead Temperature (1.5mm from case for 10Sec.) E-mail:[email protected] 2014/11/04 P2 Tel:886-6-2923150 Page 2 of 4 --- ® MCWI05 SERIES DC/DC CONVERTER 5W, SIP-Package EMC Specifications Parameter EMI Standards & Level Performance EN55022, FCC part 15 Class A (See Page 4) ESD Radiated immunity Fast transient (5) Surge (5) EMS Conducted immunity EN55024 EN61000-4-2 air ± 8kV , Contact ± 6kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms Power Derating Curve Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 To meet EN61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required.Suggested capacitor:TBD 6 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 7 Specifications are subject to change without notice. E-mail:[email protected] 2014/11/04 P2 Tel:886-6-2923150 Page 3 of 4 A A A A A ® MCWI05 SERIES DC/DC CONVERTER 5W, SIP-Package Package Specifications Mechanical Dimensions Pin Connections Pin 1 2 3 5 6 7 8 0.5 [0.02] 3.2 [0.13] 11.2 [0.44] 21.8 [0.86] Single Output -Vin +Vin Remote On/Off NC +Vout -Vout NC Dual Output -Vin +Vin Remote On/Off NC +Vout Common -Vout 0.5 [0.02] 2.0 [0.08] 3X2.54 [3X0.10] 2X2.54 5.08 [2X0.10] [0.20] NC: No Connection 3 5 6 7 8 9.3 [0.37] 2 0.25 [0.01] Bottom View 1 2.7 [0.11] 20.8 [0.82] ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) 0.50 [0.02] ►Pins X.XX±0.25 ( X.XXX±0.01) ±0.1(±0.004) Physical Characteristics Case Size : Case Material : 21.8x9.3x11.2 mm (0.86x0.37x0.44 inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Pin Material : Alloy 42 Weight : 4.8g Recommended Filter for EN 55022, class A, FCC part 15 ,level A Compliance TBD 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2014/11/04 P2 Page 4 of 4