BP5090-12 AC/DC converter AC100V input, −12V/200mA output Dimensions(Unit : mm) Absolute Maximum Ratings 26.5MAX. Unit V °C °C °C mA 10.0MAX. MARKING SIDE 4±1.0 Limits −195 −20 to +85 −25 to +105 100 200 MARKING SIDE Symbol Vin Topr Tstg Tsmax Io 21.5MAX. Parameter Input voltage Operating temperature range Storage temperature range Maximum surface temperature Output current 1 2 3 5 3.25MAX P=2.54±0.2 8 0.5±0.1 0.25±0.05 1.3±0.2 4.45MAX. 5.55MAX. 2.54×7=17.78TYP Electrical Characteristics Typ. −141 −12.5 − 0.04 0.03 0.07 82 Max. −195 −13.2 200 0.20 0.20 0.20 − Unit V V mA V V Vp-p % Conditions Derating Curve DC 250 ∗1 Vin=−113 to −195V Io=0~200mA ∗2 Output Current Io(mA) Symbol Min. Parameter Vin −113 Input voltage range Vo −11.5 Output voltage Io − Output current Vr − Line regulation Vl − Load regulation Vp − Output ripple voltage η 74 Conversion efficiency Derating Curve 200 150 100 50 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta(°C) ∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve. ∗2 Spike noise is not included in output ripple voltage. Switching frequency BP5090-12 Be sure to use fuse for safety. D1 8 R1 FUSE C1 C3 5 3 2 1 Function Common Output Power inductor Skip Power inductor Skip Skip Input L1 Vin ZNR C2 Conversion Efficiency Conversion Efficiency (Vin=−141V, Ta=25°C) 100 90 80 70 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 180 200 Output Current Io(mA) Vo Coil start For actual usage, Please kindly evaluate and confirm our part mounted in your product, Especially, Please make sure to confirm whether the load current exceed Max. rated current by using the current probe. Conversion Efficiency η(%) Please note that pin No.8 side is input. Pin No. 1 2 3 4 5 6 7 8 BP5090-12 Switching frequency -fsw(kHz) Application circuit Switching frequency (Vin=−141V, Ta=25°C) 20 18 16 14 12 10 8 6 4 2 0 0 20 40 60 80 100 120 140 160 180 200 Output Current Io(mA) External components setting Rated voltage : More than 250V Capacity : 22 to 100µF C2: Output capacitor Rated voltage : More than 25V Capacity : 100 to 470µF, low impedance type ESR : Less than 0.16Ω Rated ripple current : More than 0.58Arms Evaluate it with the actual opportunity because it influences an output ripple voltage. C3: Noise removal capacitor Rated voltage : More than 250V film capacitor, or Ceramic capacitor Capacity : 0.1 to 0.22µF L1: Choke coil Inductance : 820µH Rated current : More than 0.42A. Choose components that do not easily get magnetically saturated in high temperature. R1: Noise removal resistor Resistance : 10 to 22Ω Power : More than 1/4W D1: Rectifier diode Peak reverse voltage : More than 400V Mean rectifying current : More than 1.0A Peak forward surge current : More than 20A This product can use even all the wave rectification. ZNR: Varistor Be sure to use it to protect this product from thunder surge and the static electricity. Load Regulation -14.0 Output Voltage -Vo(V) Recommend the use of fast-acting type fuse 1.0A. C1: Input capacitor Load Regulation (Vin=−141V, Ta=25°C) -12.0 -10.0 -8.0 -6.0 -4.0 Maximum Io=200mA -2.0 0.0 0 100 200 300 400 Output Current Io(mA) 500 Surface Temperature Rising Temperature Rising ∆T(°C) FUSE: FUSE 40 35 30 25 20 15 10 5 0 0 Surface Temperature Rising (Vin=−141V, Ta=25°C) 20 40 60 80 100 120 140 160 180 200 Output Current Io(mA) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0