Model BD2130J5050AHF

Model BD2130J5050AHF
Rev B
Ultra Low Profile 0805 Balun
50Ω to 50Ω Balanced
Description
The BD2130J5050AHF is a low profile sub-miniature balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering 802.11b+g+n.
The BD2130J5050AHF is ideal for high volume manufacturing and is higher
performance than traditional ceramic and lumped element baluns. The
BD2130J5050AHF has an unbalanced port impedance of 50Ω and a 50Ω balanced
port impedance. This transformation enables single ended signals to be applied to
differential ports on modern semiconductors. The output ports have equal amplitude
(-3dB) with 180 degree phase differential. The BD2130J5050AHF is available on
tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications*: Specifications subject to change without notice.
ROOM (25°°C)
Features:
•
•
•
•
•
•
•
•
•
•
•
•
2.1 – 3.0 GHz
0.7mm Height Profile
50 Ohm to 2 x 25 Ohm
802.11 b & g +n Compliant
Low Insertion Loss
DCS, PCS & UMTS
Input to Output DC Isolation
Surface Mountable
Tape & Reel
Non-conductive Surface
RoHS Compliant
Halogen Free
Parameter
Min.
Frequency
Unbalanced Port Imp.
Balanced Port Imp.**
Return Loss
Insertion Loss***
Amplitude Balance
Phase Balance
CMRR
Power Handling
2.4
Operating Temperature
-55
12
Typ.
50
50
17
0.75
0.45
2
35
Max
Min.
2.5
2.1
Typ.
Max
Unit
3.0
2
GHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
+85
ºC
50
50
12
1.0
0.7
2
35
10
0.9
0.65
5
1.2
1.0
5
2
+85
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
BOTTOM VIEW (Far Side)
0.68±0.07
1
4x 0.37
2
3
2x 0.15
1.29±0.10
6x 0.98
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
6x
0.22
6
5
4
4x 0.65
Mechanical Outline
-Dimensions are in Millimeters
6x
0.30
Pin Designation
1 In
2 GND/DC Feed
+RF GND
3 Out 1
4 Out 2
5 GND
6 NC
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD2130J5050AHF
Rev B
Typical Performance: 1.9 GHz. to 3.1 GHz
Differential insertion loss
0
-3
-0.3
-6
-0.6
-9
-0.9
-12
-1.2
-15
-1.5
[dB]
[dB]
Return Loss
0
-18
-1.8
-21
-2.1
-24
-2.4
-27
-2.7
-30
-3
-33
-3.3
-36
1.9
2.1
2.3
2.5
Freq [GHz]
2.7
2.9
-3.6
1.9
3.1
2.1
2.3
20
1.5
15
1
10
0.5
5
0
-5
-1
-10
-1.5
-15
2.1
2.3
2.5
Freq [GHz]
2.9
3.1
2.7
2.9
3.1
0
-0.5
-2
1.9
2.7
Phase balance
2
[degree]
[dB]
Amplitude Balance
2.5
Freq [GHz]
2.7
2.9
3.1
2.7
2.9
3.1
-20
1.9
2.1
2.3
2.5
Freq [GHz]
CMRR
0
-3
-6
-9
-12
[dB]
-15
-18
-21
-24
-27
-30
-33
-36
1.9
2.1
2.3
2.5
Freq [GHz]
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD2130J5050AHF
Rev B
Typical Broadband Performance: 0.01 GHz to 8.01 GHz
Differential insertion loss
0
-3
-0.3
-6
-0.6
-9
-0.9
-12
-1.2
-15
-1.5
[dB]
[dB]
Return Loss
0
-18
-1.8
-21
-2.1
-24
-2.4
-27
-2.7
-30
-3
-33
-3.3
-36
0.01
1.01
2.01
3.01 4.01 5.01
Freq [GHz]
6.01
7.01
-3.6
0.01
8.01
1.01
2.01
Amplitude Balance
7.01
8.01
6.01
7.01
8.01
20
1.5
15
1
10
0.5
5
[degree]
[dB]
6.01
Phase balance
2
0
0
-0.5
-5
-1
-10
-1.5
-15
-2
0.01
3.01 4.01 5.01
Freq [GHz]
1.01
2.01
3.01 4.01 5.01
Freq [GHz]
6.01
7.01
8.01
6.01
7.01
8.01
-20
0.01
1.01
2.01
3.01 4.01 5.01
Freq [GHz]
CMRR
0
-3
-6
-9
-12
[dB]
-15
-18
-21
-24
-27
-30
-33
-36
0.01
1.01
2.01
3.01 4.01 5.01
Freq [GHz]
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD2130J5050AHF
Rev B
Mounting Configuration:
In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be
used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet
published specifications.
All of the Xinger components are constructed from organic PTFE based composites which possess excellent
electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and
ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier.
An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased
footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique
dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances.
DC Bias Footprint
No Bias Footprint
Circuit Pattern
Dimensions are in Millimeters
Mounting Footprint
Circuit Pattern
Footprint Pad (s)
Footprint Pad (s)
Solder Resist
Solder Resist
Dimensions are in Millimeters
Mounting Footprint
Plated thru
holes to
ground
0402
Capacitor
6x .41
4x .25
6x .41
Plated thru holes to ground
3x Transmission
lines
3x Transmission
lines
.04
.04
6x .33
6x .33
.66
.66
Plated thru
holes to
ground
4x .25
Visit us at
www.anaren.com
Plated thru
holes to
ground
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
Model BD2130J5050AHF
Rev B
Packaging and Ordering Information
Parts are available in reel and are packaged per EIA 481-D. Parts are oriented in tape and reel as shown below.
Minimum order quantities are 4000 per reel.
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282