Model BD4859N50100AHF Rev B Ultra Low Profile 0404 Balun 50Ω to 100Ω Balanced Description The BD4859N50100AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output locations on modern chipsets in an easy to use surface mount package covering 802.11a UniBand II & III and the Japanese ISM band (4.9 GHz). The BD4859N50100AHF is ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns. The BD4859N50100AHF has an unbalanced port impedance of 50Ω and a 100Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD4859N50100AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25°°C) Features: • • • • • • • • • • • 4800 – 5900 MHz 0.57 mm Height Profile 50 Ohm to 2 x 50 Ohm Low Insertion Loss 802.11a Uni-Band II & III Home Cordless Compliant Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling Operating Temperature 4800 Typ. Max Unit 5900 MHz Ω Ω dB dB dB Degrees dB Watts ºC 50 100 20 0.4 0.9 3 26 15 0.6 1.5 8 1 +85 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side) .24 .56±.06 1.04±.10 3x .27 1 2 .24 3x .27 .30 .30 1.04±.10 .50 3x .25 3 4 3x .25 Pin Designation GND / DC Feed 1 + RF GND Dimensions are in Millimeters Mechanical Outline 2 Unbalanced Port 3 Balanced Port 4 Balanced Port Visit us at www.anaren.com .50 Tolerances are Non-Cumulative USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD4859N50100AHF Rev B Typical Performance:4700 MHz. to 6100 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 5900 6000 6100 6000 6100 5500 5400 5300 5200 5100 5000 4900 6100 6000 -20 5900 -2 5800 -15 5700 -1.5 5600 -10 5500 -1 4800 0 -5 4700 0 -0.5 5400 5900 5 5300 5800 0.5 5200 5800 10 5100 5700 1 5000 5700 15 deg 2 1.5 4900 5600 Phase Balance 20 4800 5600 Amplitude Balance 4700 5500 Frequency [MHz] Frequency [MHz] [dB] 5400 4700 6100 6000 5900 5800 5700 5600 5500 5400 5300 5200 5100 -3.6 5000 -36 4900 -3.3 4800 -3 -33 5300 -2.7 -30 5200 -2.4 -27 5100 -2.1 -24 5000 -1.8 -21 4900 -18 4800 [dB] 0 4700 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 6100 6000 5900 5800 5700 5600 5500 5400 5300 5200 5100 5000 4900 4800 -36 4700 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD4859N50100AHF Rev B Wide Band Performance: 500 MHz. to 8500 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 6500 7000 7500 8000 8500 7500 8000 8500 5000 4500 4000 3500 3000 2500 2000 1500 8500 8000 7500 7000 -20 6500 -2 6000 -15 5500 -1.5 5000 -10 4500 -1 500 0 -5 1000 0 -0.5 4000 7000 5 3500 6500 0.5 3000 6000 10 2500 5500 1 2000 6000 15 deg 2 1.5 1500 5000 Phase Balance 20 1000 5500 Amplitude Balance 500 4500 Frequency [MHz] Frequency [MHz] [dB] 4000 500 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 -3.6 2000 -36 1500 -3.3 1000 -3 -33 3500 -2.7 -30 3000 -2.4 -27 2500 -2.1 -24 2000 -1.8 -21 1500 -18 1000 [dB] 0 500 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 -36 500 [dB] -15 Frequency [MHz] Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD4859N50100AHF Rev B Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. With No DC Bias 3x Transmission Line 3x .29 With DC Bias Plated thru hole to ground Plated thru hole to ground .33 3x Transmission Line 3x .29 .33 3x .29 .22 .50 .33 3x .29 .50 .22 .22 .50 .22 .50 Circuit Pattern Footprint Pad (s) Solder Resist Circuit Pattern Footprint Pad (s) Dimensions are in Millimeters Mounting Footprint Solder Resist Visit us at www.anaren.com Dimensions are in Millimeters Mounting Footprint USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD4859N50100AHF Rev B Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. 2.00 4.00 Ø1.50 .18 1.75 3.50 8.00 1.21 4.00 1.21 .70 ØA ØC ØD QUANTITY/REEL 4000 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA 7.00 [177.8] B 0.32 [8.0] 2.0 [50.8] ØC ØD 0.512 [13.0] B Visit us at www.anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282