SMD Glass Passivated Bridge Rectifiers DF2005S-G Thru. DF210S-G Reverse Voltage: 50 to 1000V Forward Current: 2.0A RoHS Device Features DFS -Rating to 1000V PRV 0.205(5.20) 0.197(5.00) -Ideal for printed circuit board. 0.335(8.50) 0.307(7.80) -Low forward voltage drop. - + 0.031(0.80) 0.023(0.60) -High current capability. ~ -The plastic material has UL flammability classification 94V-0 -UL recognized file # E217139 0.256(6.50) 0.244(6.20) ~ 0.406(10.30) 0.394(10.00) 0.047(1.20) 0.037(0.95) 0.014(0.35) 0.008(0.20) R 0.102(2.6) Max. Mechanical Data 0.323(8.2) 0.315(8.0) 0.102(2.6) 0.087(2.2) 0.063(1.6) 0.055(1.4) -Polarit: As marked on Body -Weight: 0.02 ounces, 0.38 grams -Mounting position: Any Dimensions in inches and (millimeter) Maximum ratings and electrical characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol DF 2005S-G DF 201S-G DF 202S-G DF 204S-G DF 206S-G DF 208S-G DF 210S-G Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA=40°C I(AV) 2.0 A Peak Forward Surage Current, 8.3ms Single Half Sine-Wave Super Imposed On Rated Load (JEDEC Method) IFSM 60 A Maximum Forward Voltage at 2.0A DC VF 1.1 V Parameter Maximum DC Reverse Current At Rate DC Blocking Voltage @TJ=25°C @TJ=125°C 2 10 IR 500 2 μA 2 I T Rating for Fusing (t<8.3ms) It 10.4 As Typical Junction Capacitandce Per Element (Note 1) CJ 25 pF RθJA 40 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal resistance from junction to ambient mounted on P.C.B with 0.5*0.5"(13*13mm) copper pads. Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 1 QW-BBR47 Comchip Technology CO., LTD. SMD Glass Passivated Bridge Rectifiers Rating and Characteristics Curves (DF2005S-G Thru. DF210S-G) Fig.2 - Maximum Non-Repetitive Peak Forward Surge Current Fig.1 - Derating Curve For Output Rcetified Current 70 Peak Forward Surge Current, (A) Bridge Output Full Wave Rectified Current Average ,(A) 2.0 1.6 1.2 0.8 0.4 Mounted on PC board, single phase half wave, 60Hz, resistive or inductive load 0 0 50 100 50 40 30 20 Single half sine wave (JEDEC Method) 10 0 150 1 10 20 100 Ambient Temperature, (°C) Number of Cycle at 60Hz Fig.3 - Typical Junction Capacitance Fig.4 - Typical Forward Characteristics 10 Instantaneous Forward Current, (A) 100 Capacitance, (pF) 60 10 TJ=25°C f=1MHz 1 0.1 1 10 100 TJ=25°C Pulse width: 300μS 2% duty cycle 1.0 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage, (V) Reverse Voltage, (V) Instantaneous Reverse Current, (μA) Fig.5 - Typical Reverse Characteristics 100 TJ=125 OC 10 1 O TJ=25 C 0.1 0.01 0 20 40 60 80 100 120 140 Percent of Peak Reverse Voltage, (%) Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 2 QW-BBR47 Comchip Technology CO., LTD. SMD Glass Passivated Bridge Rectifiers Reel Taping Specification d P0 P1 T E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed DFS DFS SYMBOL A B C d D D1 D2 (mm) 8.64 ± 0.10 10.41 ± 0.10 3.81 ± 0.10 1.55 ± 0.05 330 50.0 MIN. 13.00 ± 0.20 (inch) 0.340 ± 0.004 0.409 ± 0.004 0.150 ± 0.004 0.061 ± 0.002 13 1.969 MIN. 0.512 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 7.50 ± 0.05 12.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 0.32 16.00 ± 0.30 16.00~18.40 (inch) 0.069 ± 0.004 0.295 ± 0.002 0.472 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.013 0.630 ± 0.012 0.630~0.724 Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 3 QW-BBR47 Comchip Technology CO., LTD. SMD Glass Passivated Bridge Rectifiers Marking Code Part Number Marking code Packaging DF2005SP-G DF201SP-G DF202SP-G DF204SP-G DF206SP-G DF208SP-G DF210SP-G DF2005ST-G DF201ST-G DF202ST-G DF204ST-G DF206ST-G DF208ST-G DF210ST-G DF2005S DF201S DF202S DF204S DF206S DF208S DF210S DF 2005S DF201S DF202S DF204S DF206S DF208S DF210S Tube Tube Tube Tube Tube Tube Tube Reel Reel Reel Reel Reel Reel Reel - + C DF xxxS ~ ~ XXX / XXXX = Product type marking code C = Comchip Logo Note: 1) Suffix code after part number to specify packaging item . Packaging Code TUBE PACK P REEL PACK T Suggested PAD Layout A DFS SIZE A (mm) (inch) 1.20 Min 0.047 Min D B 5.21 REF 0.205 REF C 1.52 Min 0.060 Min D 10.26 Max 0.404 Max C B Standard Packaging TUBE PACK Case Type DFS TUBE Carton ( pcs ) ( pcs ) 50 10,000 REEL PACK Case Type DFS REEL Reel Size ( pcs ) (inch) 1,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 4 QW-BBR47 Comchip Technology CO., LTD.