SMD Glass Passivated Bridge Rectifiers DF005S-G Thru. DF10S-G Reverse Voltage: 50 to 1000V Forward Current: 1.0A RoHS Device Features DFS -Rating to 1000V PRV 0.205(5.2) 0.197(5.0) -Ideal for printed circuit board 0.335(8.50) 0.307(7.80) - -Low forward voltage drop. + 0.031(0.8) 0.023(0.6) -High current capability. ~ 0.256(6.5) 0.244(6.2) ~ 0.406(10.3) 0.394(10.0) -The plastic material has UL flammability 0.047(1.20) 0.037(0.95) classification 94V-0 Mechanical Data 0.014(0.35) 0.008(0.20) 0.323(8.2) 0.315(8.0) -Polarit:As marked on Body 0.102(2.6) 0.089(2.2) 0.063(1.6) 0.055(1.4) -Weight: 0.38 grams -Mounting position:Any Dimensions in inches and (millimeter) Maximum ratings and electrical characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbol DF005S-G DF01S-G DF02S-G DF04S-G DF06S-G DF08S-G DF10S-G Unit Maximum Reverse Peak Repetitive Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA=40°C I(AV) 1.0 A Peak Forward Surage Current , 8.3ms Single Half Sine-Wave Super Imposed On Rated Load IFSM 30 A 2 I t Rating for Fusing (t＜8.3ms) I t 2 10.4 A2 s Maximum Forward Voltage at 1.0A DC VF 1.1 V Maximum Reverse Current @TJ=25°C At Rated DC Blocking Voltage @TJ=125°C IR 10 500 μA Typical Junction Capacitance (Note 1) CJ 25 pF RθJA 40 °C/W TJ -55 ~ +150 °C TSTG -55 ~ +150 °C Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V. 2. Unit mounted on P.C.B with 0.51"×0.51" (13×13mm) copper pads. Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 1 QW-BBR03 Comchip Technology CO., LTD. SMD Glass Passivated Bridge Rectifiers Rating and Characteristics Curves (DF005S-G Thru. DF10S-G) Fig.1 - Forward Current Derating Curve Fig.2 - Maximum Non-repetitive Surge Current 40 Peak Forward Surge Current, (A) Average Forward Current, (A) 1.0 0.8 0.6 0.4 0.2 Mounted on PC board, single phase half wave, 60Hz, resistive or inductive load 0 0 50 100 20 10 Single half sine wave (JEDEC method) 0 150 1 10 100 Ambient Temperature, (°C) Number Of Cycle At 60Hz Fig.3 - Typical Junction Capacitance Fig.4 - Typical Forward Characteristics 100 10 Instantaneous Forward Current, (A) Capacitance, (pF) 30 10 TJ=25°C f=1MHz 1 0.1 1 10 100 TJ=25°C Pulse width: 300us 2% duty cycle 1.0 0.1 0.01 0 Reverse Voltage, (V) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage, (V) Instantaneous Reverse Current, (μA) Fig.5 - Typical Reverse Characteristics 100 TJ=125°C 10 1.0 TJ=25°C 0.1 0.01 0 20 40 60 80 100 120 140 Percent of Peak Reverse Voltage, (%) Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 2 QW-BBR03 Comchip Technology CO., LTD. SMD Glass Passivated Bridge Rectifiers Reel Taping Specification d P0 P1 T E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed DFS DFS SYMBOL A B C d D D1 D2 (mm) 8.64 ± 0.10 10.41 ± 0.10 3.81 ± 0.10 1.55 ± 0.05 330 50.0 MIN. 13.00 ± 0.20 (inch) 0.340 ± 0.004 0.409 ± 0.004 0.150 ± 0.004 0.061 ± 0.002 13 1.969 MIN. 0.512 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 7.50 ± 0.05 12.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 0.32 16.00 ± 0.30 16.00~18.40 (inch) 0.069 ± 0.004 0.295 ± 0.002 0.472 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.013 0.630 ± 0.012 0.630~0.724 Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 3 QW-BBR03 Comchip Technology CO., LTD. SMD Glass Passivated Bridge Rectifiers Marking Code Part Number Marking code Packaging DF005SP-G DF01SP-G DF02SP-G DF04SP-G DF06SP-G DF08SP-G DF10SP-G DF005ST-G DF01ST-G DF02ST-G DF04ST-G DF06ST-G DF08ST-G DF10ST-G DF005S DF01S DF02S DF04S DF06S DF08S DF10S DF005S DF01S DF02S DF04S DF06S DF08S DF10S Tube Tube Tube Tube Tube Tube Tube Reel Reel Reel Reel Reel Reel Reel - C + DF xxS ~ ~ XX / XXX = Product type marking code C = Comchip Logo Note: 1) Suffix code after part number to specify packaging item . Packaging Code TUBE PACK P REEL PACK T Suggested PAD Layout A DFS SIZE (mm) (inch) A 1.20 Min 0.047 Min B 5.21 REF 0.205 REF C 1.52 Min 0.060 Min D 10.26 Max 0.404 Max D C B Standard Packaging TUBE PACK Case Type DFS TUBE Carton ( pcs ) ( pcs ) 50 10,000 REEL PACK Case Type DFS REEL Reel Size ( pcs ) (inch) 1,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV: F Page 4 QW-BBR03 Comchip Technology CO., LTD.