SMD Zener Diode CZRA4728-G Thru CZRA4764-G Voltage: 3.3 to 100 Volts Power: 1.0 Watts RoHS Device DO-214AC/SMA Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. -Standard zener voltage tolerance ±5%. 0.196(4.9) 0.180(4.5) 0.012(0.3) Typ. 0.106(2.7) 0.091(2.3) -Low inductance. -Low profile package. -Built-in strain relief. Mechanical data -Epoxy: UL94V-0 rated flame retardant. 0.068(1.7) 0.060(1.5) -Case: Molded plastic, JEDEC DO-214AC/SMA 0.032(0.8)Typ. -Terminals: Solder Plated,solderable per MIL-STD-750,method 2026. 0.032(0.8)Typ. -Polarity: Indicated by cathode band. -Mounting position: Any. Dimensions in inches and (millimeter) -Weight: 0.05 gram(approx.). Maximum Ratings (T =25°C, unless otherwise noted) A Parameter Condition Symbol MIN. TYP. MAX. Units Forward voltage IF = 200 mA VF 1.20 V Power Dissipation @TL = 75°C PD 1000 mW Junction to case (Note 1) RθJC 30 °C/W Junction to ambient (Note 1) RθJA 50 °C/W Thermal resistance Operating temperature Storge temperature TJ -55 +150 °C TSTG -65 +175 °C Note: 1.Mounted on 0.2”x0.2”(5x5mm)FR-4 PCB. Company reserves the right to improve product design , functions and reliability without notice. QW-BZ004 REV:E Page 1 SMD Zener Diode Electrical Characteristics ( at T A Zener Voltage Part Number Marking Code = 25°C unless otherwise noted) Zener Impedance Test Current VZ@IZT IZT ZZT @ IZT ZZK @ IZK Volts mA oHMs Leakage Current Surge Current IZK IR VR Isurge oHMs mA uA Volts mA CZRA4728-G Z3V3 3.3 76 10 400 1.0 100 1.0 1380 CZRA4729-G Z3V6 3.6 69 10 400 1.0 100 1.0 1260 CZRA4730-G Z3V9 3.9 64 9 400 1.0 50 1.0 1190 CZRA4731-G Z4V3 4.3 58 9 400 1.0 10 1.0 1070 CZRA4732-G Z4V7 4.7 53 8 500 1.0 10 1.0 970 CZRA4733-G Z5V1 5.1 49 7 550 1.0 10 1.0 890 CZRA4734-G Z5V6 5.6 45 5 600 1.0 10 2.0 810 CZRA4735-G Z6V2 6.2 41 2 700 1.0 10 3.0 730 CZRA4736-G Z6V8 6.8 37 3.5 700 1.0 10 4.0 660 CZRA4737-G Z7V5 7.5 34 4 700 0.5 10 5.0 605 CZRA4738-G Z8V2 8.2 31 4.5 700 0.5 10 6.0 550 CZRA4739-G Z9V1 9.1 28 5 700 0.5 10 7.0 500 CZRA4740-G Z10 10 25 7 700 0.25 10 7.6 454 CZRA4741-G Z11 11 23 8 700 0.25 5 8.4 414 CZRA4742-G Z12 12 21 9 700 0.25 5 9.1 380 CZRA4743-G Z13 13 19 10 700 0.25 5 9.9 344 CZRA4744-G Z15 15 17 14 700 0.25 5 11.4 304 CZRA4745-G Z16 16 15.5 16 700 0.25 5 12.2 285 CZRA4746-G Z18 18 14 20 750 0.25 5 13.7 250 CZRA4747-G Z20 20 12.5 22 750 0.25 5 15.2 225 CZRA4748-G Z22 22 11.5 23 750 0.25 5 16.7 205 CZRA4749-G Z24 24 10.5 25 750 0.25 5 18.2 190 CZRA4750-G Z27 27 9.5 35 750 0.25 5 20.6 170 CZRA4751-G Z30 30 8.5 40 1000 0.25 5 22.8 150 CZRA4752-G Z33 33 7.5 45 1000 0.25 5 25.1 135 CZRA4753-G Z36 36 7.0 50 1000 0.25 5 27.4 125 CZRA4754-G Z39 39 6.5 60 1000 0.25 5 29.7 115 CZRA4755-G Z43 43 6.0 70 1500 0.25 5 32.7 110 Company reserves the right to improve product design , functions and reliability without notice. QW-BZ004 REV:E Page 2 SMD Zener Diode Electrical Characteristics ( at T A = 25°C unless otherwise noted) Zener Voltage Test Current Marking Part Number Code Zener Impedance VZ@IZT IZT ZZT @ IZT ZZK @ IZK Volts mA (Ω)Max Leakage Current Surge Current IZK IR VR Isurge (Ω)Max mA (uA)Max Volts mA CZRA4756-G Z47 47 5.5 80 1500 0.25 5 35.8 95 CZRA4757-G Z51 51 5.0 95 1500 0.25 5 38.8 90 CZRA4758-G Z56 56 4.5 110 2000 0.25 5 42.6 80 CZRA4759-G Z62 62 4.0 125 2000 0.25 5 47.1 70 CZRA4760-G Z68 68 3.7 150 2000 0.25 5 51.7 65 CZRA4761-G Z75 75 3.3 175 2000 0.25 5 56.0 60 CZRA4762-G Z82 82 3.0 200 3000 0.25 5 62.2 55 CZRA4763-G Z91 91 2.8 250 3000 0.25 5 69.2 50 CZRA4764-G Z100 100 2.5 350 3000 0.25 5 76.0 45 Note: 5% tolerance of Zener voltage. RATING AND CHARACTERISTIC CURVES (ACZRA4728-G Thru. ACZRA4764-G) Fig.1 - Max. Continuous Power Derating Fig.2 - Maximum surge power 100 Rectangular waveform TJ-25°C Prior to initial pulse 60 Hz resistive or inductive load Peak Surge Power, (W) Maximum Power Dissipation, (W) 1.0 0.75 0.5 0.25 0 0 25 50 75 100 Lead Temperature, TL (°C) 125 150 5% Duty Cycle 11V-91V Non-Repetitive 10 10% Duty Cycle 20% Duty Cycle 1.0 0.01 0.1 1 10 100 Pulse Width, (ms) Company reserves the right to improve product design , functions and reliability without notice. QW-BZ004 1000 REV:E Page 3 SMD Zener Diode RATING AND CHARACTERISTIC CURVES ( CZRA4728-G Thru. CZRA4764-G) FIG 3B. Range for Units 12 to 100 Volts FIG 3A. Range for Units to 12 Volts 100 Temperature Coefficient, (mV/°C) Temperature Coefficient, (mV/°C) 12 10 8 6 4 2 Range 0 -2 VZ@IZT 10 Range VZ@IZT -4 2 3 4 5 6 7 8 9 10 11 1 10 12 50 100 Zener Voltage, (V) Zener Voltage, (V) 175 Temperature Coefficient, (mV/°C) Junction to lead thermal, (mV/°C/W) FIG 4. Temperature Coefficients (-55°C to +150°C temperature change ; 90% of the units are in the ranges indicated.) 150 125 100 75 50 25 0 6 VZ@IZT TA=25 OC 4 20mA 2 1mA -2 Note: Below 3V and above 8V changes in Zener Voltage do not affect temperature -4 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 3 FIG 5. Typical Thermal Resistance Versus Lead 6 Capacitance, (pF) IZ=5mA IZ=20mA 10 TJ=25°C IZ(ms)=0.1IZ(do) f=60HZ 10 Zener Current,(mA) 100 0V bias 100 1V bias 10 50% of breakdown bias 4 1 10 100 Nominal Vz, (V) Company reserves the right to improve product design , functions and reliability without notice. QW-BZ004 8 7 400 IZ=1mA 1 1 5 FIG 6. Effect of Zener Current 1000 100 4 Zener Voltage, (V) Lead length to heat sink, (Inches) Dynamic impedance, (OHMs) 0.01mA 0 REV:E Page 4 SMD Zener Diodes Reel Taping Specification d P0 P1 T E Index hole F W B C P A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed DO-214AC (SMA) DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.80 ± 0.10 5.00 ± 0.10 1.90 ± 0.10 1.50 ± 0.10 178.0 ± 2.00 62.0 MIN. 13.00 ± 0.50 (inch) 0.110 ± 0.004 0.200 ± 0.004 0.075 ± 0.004 0.059 ± 0.004 7.008 ± 0.079 2.441 MIN. 0.512 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 18.00 ± 1.00 (inch) 0.069 ± 0.004 0.216 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.709 ± 0.039 Company reserves the right to improve product design , functions and reliability without notice. REV:E Page 5 QW-BZ004 Comchip Technology CO., LTD. SMD Zener Diode Pinning information Simplified outline Pin PIN 1 Cathode PIN 2 Anode 1 Symbol 2 1 2 Marking Code Marking Code Part Number CZRA4728-G ~ CZRA4764-G XXXX XXXX Product type marking code (see page.2~3) Suggested PAD Layout D DO-214AC (SMA) SIZE (mm) (inch) A A 3.80 0.150 E B 1.60 0.063 C 2.80 0.110 D 5.40 0.213 E 2.20 0.087 C B Standard Packaging REEL PACK Case Type DO-214AC (SMA) REEL Reel Size ( pcs ) (inch) 2,000 7 Company reserves the right to improve product design , functions and reliability without notice. REV:E Page 6 QW-BZ004 Comchip Technology CO., LTD.