Cree® XLamp® XM-L EasyWhite® LEDs Product Description FEATURES Table of Contents The XLamp® XM-L EasyWhite® (EZW) • Available in 4-step and 2-step Characteristics............................................2 LED eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver the consistent color and high efficacy light output of a multi‑die LED in EasyWhite bins at 2700 K, 3000 K, Flux Characteristics, Standard Order 3500 K, 4000 K, 5000 K CCT Codes and Bins, 6-Volt XM-L EZW.............3 • Wide range of operating current – up to 2 A @ 6 V Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW...........6 the compact XM-L footprint. XLamp XM‑L • 85 °C binning and characterization Relative Spectral Power Distribution.........9 EasyWhite LEDs can reduce LED‑to‑LED • Available in 6‑V and 12‑V versions Relative Flux vs. Junction Temperature.....9 color variation to within a 2‑step MacAdam • Low thermal resistance: 2.5 °C/W Electrical Characteristics..........................10 ellipse, 94% smaller than the total area of • Wide viewing angle: 115° Relative Flux vs. Current...........................11 the corresponding ANSI C78.377 color • Wide variety of CRI choices: standard Relative Chromaticity vs. Current and region. CRI as well as 80-, 85-, 90‑minimum Temperature..............................................12 CRI Typical Spatial Distribution.......................13 The XLamp XM-L EasyWhite LED is the • Electrically neutral thermal path Thermal Design.........................................13 perfect choice for lighting applications • Unlimited floor life at ≤ 30 ºC/85% Performance Groups – Brightness..........14 where moderate to high luminous flux output is required from a single, small point source. Example applications RH • Reflow solderable - JEDEC J‑STD‑020C Performance Groups – Chromaticity.......14 Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space...............................15 include: LED retrofit bulbs, commercial/ • RoHS‑ and REACh-compliant Cree ANSI White Bins Plotted on the retail display spotlights, and other indoor • UL recognized component 1931 CIE Color Space...............................16 general-illumination applications. ® (E349212) CLD-DS38 Rev 8C Product family data sheet Bin and Order Code Formats....................16 Reflow Soldering Characteristics.............17 Notes.........................................................18 Mechanical Dimensions...........................20 Tape and Reel............................................21 www.cree.com/Xlamp Packaging..................................................22 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® XM-L EasyWhite ® LED Characteristics Characteristics Unit Thermal resistance, junction to solder point °C/W 2.5 degrees 115 Temperature coefficient of voltage (6 V) mV/°C -6.0 Temperature coefficient of voltage (12 V) mV/°C -12.0 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current (6 V) mA 2000 DC forward current (12 V) mA 1000 Reverse current (6 V, 12 V) mA -0.1 Forward voltage (@ 700 mA, 85 °C, 6 V) V 5.7 7.0 Forward voltage (@ 350 mA, 85 °C, 12 V) V 11.5 14.0 LED junction temperature °C 150 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® XM-L EasyWhite ® LED Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) The following table provides the order codes for 6-Volt XLamp XM-L EZW LEDs. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Minimum Luminous Flux @ 700 mA 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* U4 340 404 U5 360 427 U6 380 451 V2 400 475 XMLEZW-00-0000-0B00V250H XMLEZW-00-0000-0B00V250F U2 300 356 XMLEZW-00-0000-0B00U240H XMLEZW-00-0000-0B00U240F U3 320 380 U4 340 404 XMLEZW-00-0000-0B00U440H XMLEZW-00-0000-0B00U440F T6 280 332 XMLEZW-00-0000-0B00T635H XMLEZW-00-0000-0B00T635F U2 300 356 U3 320 380 XMLEZW-00-0000-0B00U335H XMLEZW-00-0000-0B00U335F T5 260 309 XMLEZW-00-0000-0B00T530H XMLEZW-00-0000-0B00T530F T6 280 332 U2 300 356 U3 320 380 XMLEZW-00-0000-0B00U330H XMLEZW-00-0000-0B00U330F T4 240 285 XMLEZW-00-0000-0B00T427H XMLEZW-00-0000-0B00T427F T5 260 309 T6 280 332 U2 300 356 Chromaticity Region Order Code Chromaticity Region XMLEZW-00-0000-0B00U450H 50H 40H 35H 30H 27H XMLEZW-00-0000-0B00U550H XMLEZW-00-0000-0B00U650H XMLEZW-00-0000-0B00U340H XMLEZW-00-0000-0B00U235H XMLEZW-00-0000-0B00T630H XMLEZW-00-0000-0B00U230H XMLEZW-00-0000-0B00T527H XMLEZW-00-0000-0B00T627H XMLEZW-00-0000-0B00U227H Order Code XMLEZW-00-0000-0B00U450F 50F 40F 35F 30F 27F XMLEZW-00-0000-0B00U550F XMLEZW-00-0000-0B00U650F XMLEZW-00-0000-0B00U340F XMLEZW-00-0000-0B00U235F XMLEZW-00-0000-0B00T630F XMLEZW-00-0000-0B00U230F XMLEZW-00-0000-0B00T527F XMLEZW-00-0000-0B00T627F XMLEZW-00-0000-0B00U227F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 18). • For Standard CRI parts, typical CRI is 80 for 4000 – 3500 K CCT parts and 82 for 3000 – 2700 K CCT parts. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® XM-L EasyWhite ® LED Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) Continued Color CCT Range 4000 K 3500 K 80-CRI Minimum EasyWhite 3000 K 2700 K 3000 K 85-CRI Minimum EasyWhite 2700 K Minimum Luminous Flux @ 700 mA 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* T6 280 332 U2 300 356 U3 320 380 U4 340 404 XMLEZW-00-0000-0B0HU440H XMLEZW-00-0000-0B0HU440F T5 260 309 XMLEZW-00-0000-0B0HT535H XMLEZW-00-0000-0B0HT535F T6 280 332 U2 300 356 U3 320 380 XMLEZW-00-0000-0B0HU335H XMLEZW-00-0000-0B0HU335F T5 260 309 XMLEZW-00-0000-0B0HT530H XMLEZW-00-0000-0B0HT530F Chromaticity Region Order Code Chromaticity Region XMLEZW-00-0000-0B0HT640H 40H 35H XMLEZW-00-0000-0B0HU240H XMLEZW-00-0000-0B0HU340H XMLEZW-00-0000-0B0HT635H XMLEZW-00-0000-0B0HU235H XMLEZW-00-0000-0B0HT640F 40F 35F XMLEZW-00-0000-0B0HU240F XMLEZW-00-0000-0B0HU340F XMLEZW-00-0000-0B0HT635F XMLEZW-00-0000-0B0HU235F T6 280 332 U2 300 356 U3 320 380 XMLEZW-00-0000-0B0HU330H XMLEZW-00-0000-0B0HU330F T4 240 285 XMLEZW-00-0000-0B0HT427H XMLEZW-00-0000-0B0HT427F T5 260 309 T6 280 332 U2 300 356 XMLEZW-00-0000-0B0HU227H XMLEZW-00-0000-0B0HU227F T3 220 261 XMLEZW-00-0000-0B0PT330H XMLEZW-00-0000-0B0PT330F T4 240 285 T5 260 309 T6 280 332 XMLEZW-00-0000-0B0PT630H XMLEZW-00-0000-0B0PT630F T2 200 237 XMLEZW-00-0000-0B0PT227H XMLEZW-00-0000-0B0PT227F T3 220 261 T4 240 285 T5 260 309 30H 27H 30H 27H XMLEZW-00-0000-0B0HT630H Order Code XMLEZW-00-0000-0B0HU230H XMLEZW-00-0000-0B0HT527H XMLEZW-00-0000-0B0HT627H XMLEZW-00-0000-0B0PT430H XMLEZW-00-0000-0B0PT530H XMLEZW-00-0000-0B0PT327H XMLEZW-00-0000-0B0PT427H XMLEZW-00-0000-0B0PT527H 30F 27F 30F 27F XMLEZW-00-0000-0B0HT630F XMLEZW-00-0000-0B0HU230F XMLEZW-00-0000-0B0HT527F XMLEZW-00-0000-0B0HT627F XMLEZW-00-0000-0B0PT430F XMLEZW-00-0000-0B0PT530F XMLEZW-00-0000-0B0PT327F XMLEZW-00-0000-0B0PT427F XMLEZW-00-0000-0B0PT527F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 18). • For Standard CRI parts, typical CRI is 80 for 4000 – 3500 K CCT parts and 82 for 3000 – 2700 K CCT parts. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® XM-L EasyWhite ® LED Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) Continued CCT Range Color 3000 K 90-CRI Minimum EasyWhite 2700 K Color ANSI White Minimum Luminous Flux @ 700 mA 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* T2 200 237 T3 220 261 T4 240 285 T5 260 309 XMLEZW-00-0000-0B0UT530H XMLEZW-00-0000-0B0UT530F S6 180 214 XMLEZW-00-0000-0B0US627H XMLEZW-00-0000-0B0US627F T2 200 237 T3 220 261 T4 240 285 Chromaticity Region Order Code XMLEZW-00-0000-0B0UT230H 30H 27H XMLEZW-00-0000-0B0UT330H XMLEZW-00-0000-0B0UT430H XMLEZW-00-0000-0B0UT227H XMLEZW-00-0000-0B0UT327H XMLEZW-00-0000-0B0UT427H Minimum Luminous Flux @ 700 mA CCT Range 5000 K Chromaticity Region Chromaticity Regions Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* U4 340 404 U5 360 427 U6 380 451 V2 400 475 Order Code XMLEZW-00-0000-0B0UT230F 30F 27F XMLEZW-00-0000-0B0UT330F XMLEZW-00-0000-0B0UT430F XMLEZW-00-0000-0B0UT227F XMLEZW-00-0000-0B0UT327F XMLEZW-00-0000-0B0UT427F Order Code XMLEZW-00-0000-0B00U40E3 0E3 XMLEZW-00-0000-0B00U50E3 XMLEZW-00-0000-0B00U60E3 XMLEZW-00-0000-0B00V20E3 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 18). • For Standard CRI parts, typical CRI is 80 for 4000 – 3500 K CCT parts and 82 for 3000 – 2700 K CCT parts. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® XM-L EasyWhite ® LED Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) The following table provides the order codes for 12-Volt XLamp XM-L EZW LEDs. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K Minimum Luminous Flux @ 350 mA 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* U4 340 404 U5 360 427 U6 380 451 V2 400 475 XMLEZW-00-0000-0D00V250H XMLEZW-00-0000-0D00V250F U2 300 356 XMLEZW-00-0000-0D00U240H XMLEZW-00-0000-0D00U240F U3 320 380 U4 340 404 XMLEZW-00-0000-0D00U440H XMLEZW-00-0000-0D00U440F T6 280 332 XMLEZW-00-0000-0D00T635H XMLEZW-00-0000-0D00T635F U2 300 356 Chromaticity Region Order Code Chromaticity Region XMLEZW-00-0000-0D00U450H 50H 40H 35H XMLEZW-00-0000-0D00U550H XMLEZW-00-0000-0D00U650H XMLEZW-00-0000-0D00U340H XMLEZW-00-0000-0D00U235H Order Code XMLEZW-00-0000-0D00U450F 50F 40F 35F XMLEZW-00-0000-0D00U550F XMLEZW-00-0000-0D00U650F XMLEZW-00-0000-0D00U340F XMLEZW-00-0000-0D00U235F U3 320 380 XMLEZW-00-0000-0D00U335H XMLEZW-00-0000-0D00U335F T5 260 309 XMLEZW-00-0000-0D00T530H XMLEZW-00-0000-0D00T530F T6 280 332 U2 300 356 U3 320 380 XMLEZW-00-0000-0D00U330H XMLEZW-00-0000-0D00U330F T4 240 285 XMLEZW-00-0000-0D00T427H XMLEZW-00-0000-0D00T427F T5 260 309 T6 280 332 U2 300 356 30H 27H XMLEZW-00-0000-0D00T630H XMLEZW-00-0000-0D00U230H XMLEZW-00-0000-0D00T527H XMLEZW-00-0000-0D00T627H XMLEZW-00-0000-0D00U227H 30F 27F XMLEZW-00-0000-0D00T630F XMLEZW-00-0000-0D00U230F XMLEZW-00-0000-0D00T527F XMLEZW-00-0000-0D00T627F XMLEZW-00-0000-0D00U227F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 18). • For Standard CRI parts, typical CRI is 80 for 4000 – 3500 K CCT parts and 82 for 3000 – 2700 K CCT parts. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® XM-L EasyWhite ® LED Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) Continued Color CCT Range 4000 K 3500 K 80-CRI Minimum EasyWhite 3000 K 2700 K 3000 K 85-CRI Minimum EasyWhite 2700 K Minimum Luminous Flux @ 350 mA 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* T6 280 332 U2 300 356 U3 320 380 U4 340 404 XMLEZW-00-0000-0D0HU440H XMLEZW-00-0000-0D0HU440F T5 260 309 XMLEZW-00-0000-0D0HT535H XMLEZW-00-0000-0D0HT535F T6 280 332 U2 300 356 U3 320 380 XMLEZW-00-0000-0D0HU335H XMLEZW-00-0000-0D0HU335F T5 260 309 XMLEZW-00-0000-0D0HT530H XMLEZW-00-0000-0D0HT530F Chromaticity Region Order Code Chromaticity Region XMLEZW-00-0000-0D0HT640H 40H 35H XMLEZW-00-0000-0D0HU240H XMLEZW-00-0000-0D0HU340H XMLEZW-00-0000-0D0HT635H XMLEZW-00-0000-0D0HU235H XMLEZW-00-0000-0D0HT640F 40F 35F XMLEZW-00-0000-0D0HU240F XMLEZW-00-0000-0D0HU340F XMLEZW-00-0000-0D0HT635F XMLEZW-00-0000-0D0HU235F T6 280 332 U2 300 356 U3 320 380 XMLEZW-00-0000-0D0HU330H XMLEZW-00-0000-0D0HU330F T4 240 285 XMLEZW-00-0000-0D0HT427H XMLEZW-00-0000-0D0HT427F T5 260 309 T6 280 332 U2 300 356 XMLEZW-00-0000-0D0HU227H XMLEZW-00-0000-0D0HU227F T3 220 261 XMLEZW-00-0000-0D0PT330H XMLEZW-00-0000-0D0PT330F T4 240 285 T5 260 309 T6 280 332 XMLEZW-00-0000-0D0PT630H XMLEZW-00-0000-0D0PT630F T2 200 237 XMLEZW-00-0000-0D0PT227H XMLEZW-00-0000-0D0PT227F T3 220 261 T4 240 285 T5 260 309 30H 27H 30H 27H XMLEZW-00-0000-0D0HT630H Order Code XMLEZW-00-0000-0D0HU230H XMLEZW-00-0000-0D0HT527H XMLEZW-00-0000-0D0HT627H XMLEZW-00-0000-0D0PT430H XMLEZW-00-0000-0D0PT530H XMLEZW-00-0000-0D0PT327H XMLEZW-00-0000-0D0PT427H XMLEZW-00-0000-0D0PT527H 30F 27F 30F 27F XMLEZW-00-0000-0D0HT630F XMLEZW-00-0000-0D0HU230F XMLEZW-00-0000-0D0HT527F XMLEZW-00-0000-0D0HT627F XMLEZW-00-0000-0D0PT430F XMLEZW-00-0000-0D0PT530F XMLEZW-00-0000-0D0PT327F XMLEZW-00-0000-0D0PT427F XMLEZW-00-0000-0D0PT527F Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 18). • For Standard CRI parts, typical CRI is 80 for 4000 – 3500 K CCT parts and 82 for 3000 – 2700 K CCT parts. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® XM-L EasyWhite ® LED Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) Continued CCT Range Color 3000 K 90-CRI Minimum EasyWhite 2700 K Color ANSI White Minimum Luminous Flux @ 350 mA 2-Step 4-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* T2 200 237 T3 220 261 T4 240 285 T5 260 309 XMLEZW-00-0000-0D0UT530H XMLEZW-00-0000-0D0UT530F S6 180 214 XMLEZW-00-0000-0D0US627H XMLEZW-00-0000-0D0US627F T2 200 237 T3 220 261 T4 240 285 Chromaticity Region Order Code XMLEZW-00-0000-0D0UT230H 30H 27H XMLEZW-00-0000-0D0UT330H XMLEZW-00-0000-0D0UT430H XMLEZW-00-0000-0D0UT227H XMLEZW-00-0000-0D0UT327H XMLEZW-00-0000-0D0UT427H Minimum Luminous Flux @ 350 mA CCT Range 5000 K Chromaticity Region Chromaticity Regions Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* U4 340 404 U5 360 427 U6 380 451 V2 400 475 Order Code XMLEZW-00-0000-0D0UT230F 30F 27F XMLEZW-00-0000-0D0UT330F XMLEZW-00-0000-0D0UT430F XMLEZW-00-0000-0D0UT227F XMLEZW-00-0000-0D0UT327F XMLEZW-00-0000-0D0UT427F Order Code XMLEZW-00-0000-0D00U40E3 0E3 XMLEZW-00-0000-0D00U50E3 XMLEZW-00-0000-0D00U60E3 XMLEZW-00-0000-0D00V20E3 Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 18). • For Standard CRI parts, typical CRI is 80 for 4000 – 3500 K CCT parts and 82 for 3000 – 2700 K CCT parts. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® XM-L EasyWhite ® LED Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 5000 K CCT 3000 K CCT 40 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (6-V - IF = 700 mA; 12-V - IF = 350 mA) 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® XM-L EasyWhite ® LED Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 85 °C) 2000 Forward Current (mA) 1750 1500 1250 6V 1000 750 500 250 0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 Forward Voltage (V) 1000 Forward Current (mA) 750 500 12 V 250 0 10.0 10.5 11.0 11.5 12.0 12.5 13.0 Forward Voltage (V) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® XM-L EasyWhite ® LED LF Flux vs. I @ 85 Relative vs. Current (TJ = 85°C) 225% Relative Luminous Flux 200% 175% 150% 125% 6V 100% 75% 50% 25% 0% 0 250 500 750 1000 1250 1500 1750 2000 Forward Current (mA) 225% Relative Luminous Flux 200% 175% 150% 125% 12 V 100% 75% 50% 25% 0% 0 200 400 600 800 1000 Forward Current (mA) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® XM-L EasyWhite ® LED XM-L EZW 6V 0.020 Relative Chromaticity vs. Current and Temperature 0.015 XM-L EZW 6V XLamp XM-L EZW LED, 6-V 0.010 0.020 0.005 0.015 ΔCCx 0.000 0.010 ΔCCy -0.005 0.005 -0.010 0.000 ΔCCx -0.015 -0.005 -0.020 -0.010 ΔCCy 0 400 800 -0.015 -0.020 1200 1600 2000 Current (mA) 0 400 800 1200 1600 2000 Current (mA) XM-L EZW 12V XLamp XM-L EZW LED, 12-V 0.020 0.015 XM-L EZW 12V 0.010 0.020 0.005 0.015 ΔCCx 0.000 0.010 ΔCCy -0.005 0.005 0.000 -0.005 -0.010 ΔCCx -0.015 ΔCCy -0.020 -0.010 0 200 400 600 800 1000 Current (mA) -0.015 -0.020 XM-L EZW, 6V, 12V 0 XLamp XM-L 200 EZW LED, 400 6-V, 0.020 12V600 800 1000 Current (mA) 0.015 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (°C) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® XM-L EasyWhite ® LED Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle (º) Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Thermal Design (6V) from XML DS Thermal Design (12V) from XML DS XLamp XM-L EZW LED, 6-V XLamp XM-L EZW LED, 12-V 1200 2500 1000 Maximum Current (mA) Maximum Current (mA) 2000 1500 1000 Rj-a = 4 °C/W Rj-a = 7 °C/W 500 Rj-a = 15 °C/W 0 20 40 600 400 Rj-a = 4 °C/W Rj-a = 7 °C/W 200 Rj-a = 10 °C/W 0 800 60 80 100 Ambient Temperature (ºC) 120 140 160 0 Rj-a = 10 °C/W Rj-a = 15 °C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® XM-L EasyWhite ® LED Performance Groups – Brightness (TJ = 85 °C) XLamp XM-L EasyWhite LEDs are tested for luminous flux and placed into one the following bins. Group Code Minimum Luminous Flux @ 700 mA, 6 V (@ 350 mA , 12 V) Maximum Luminous Flux @ 700 mA, 6 V (@ 350 mA, 12 V) S6 180 200 T2 200 220 T3 220 240 T4 240 260 T5 260 280 T6 280 300 U2 300 320 U3 320 340 U4 340 360 U5 360 380 U6 380 400 V2 400 420 Performance Groups – Chromaticity (TJ = 85 °C) XLamp XM-L EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code 50F 40F 35F 30F 27F CCT 5000 K 4000 K 3500 K 3000 K 2700 K EasyWhite Color Temperatures – 2-Step x y 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3981 Code x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3758 0.3844 0.3778 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 50H 40H 35H 30H 27H CCT 5000 K 4000 K 3500 K 3000 K 2700 K Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® XM-L EasyWhite ® LED Performance Groups – Chromaticity (TJ = 85 °C) - Continued ANSI White Bins Code Bin Code CCT 3A0 3B0 0E3 5000 K 3C0 3D0 x y .3371 .3490 .3451 .3554 .3440 .3427 .3366 .3369 .3376 .3616 .3463 .3687 .3451 .3554 .3371 .3490 .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 .3451 .3554 .3533 .3620 .3515 .3487 .3440 .3427 Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700 K 3000 K 0.43 3500 K 0.42 4000 K 4500 K 0.41 CCy 0.40 5000 K 0.39 5700 K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 CCx XLamp ® XM-L EasyWhite ® LED Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj=85 °C) 0.45 0.44 3000 K 0.43 3200 K 0.42 3500 K 3700 K 0.41 6C0 4300 K 0.39 CCy 7B0 4000 K 0.40 5300 K 0.38 5000 K 4750 K 6B0 4500 K 8A0 7D0 8D0 7A0 5C0 6D0 5B0 6A0 5D0 0.37 0.36 ANSI C78.377A 5A0 3C0 2600 K 8C0 8B0 7C0 2700 K 2900 K 3B0 3D0 0.35 3A0 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series XML = XM-L Series XML = XM-L Internal code Internal code Kit code Flux bin SSSCCC-BB-HHHH-HGNNNNNNN Vf class B = 6-V class D = 12-V class Reel size 0 = 1000 (standard) Color EZW = EasyWhite Internal code SSSCCC-B-WWW-FFF-GAAAAAA Vf class B = 6-V class D = 12-V class Chromaticity bin Color EZW = EasyWhite Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® XM-L EasyWhite ® LED Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® XM-L EasyWhite ® LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please consult the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XM-L EasyWhite LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® XM-L EasyWhite ® LED Notes - Continued UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19 6 6 5 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHINTHIS AREPLOT THE PROPRIETARY AND CREE CONFIDENTIAL. AND THE INFORMATION CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND MAY NOT BE COPIED, REPRODUCED OR DISCLOSED CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOTTO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. PERSON WITHOUT UNAUTHORIZED THE WRITTEN CONSENT 5 OF CREE INC. 6 5 4 4 ® XLamp ® XM-L EasyWhite LED 3 3 REV REV A 4 Mechanical Dimensions 3 A 2 REVISONS NOTICE CONFIDENTIAL. THIS PLOT AND THE INFORMATION TAINED WITHIN ARE THE PROPRIETARY AND FIDENTIAL INFORMATION OF CREE, INC. THIS PLOT NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY D CONSENT UTHORIZED PERSON WITHOUT THE WRITTEN REE INC. D REV A Thermal vias, if present, are not shown on these drawings. BY DESCRIPTION DC NEW RELEASE All measurements are ±.13 mm unless otherwise indicated. 3.02 3.02 5.00 5.00 4.78 .73 .73 .50 .50 3.78 2.78 .50 3.02 5.00 .73 4. 4.78 3. 3.78 2. 2.78 .50 .50 .50 5.00 5.00 5.00 C C 4.78 R2.26 R2.26 Anode Top View R2.26 .50 .50 .80 .50 B .80 .80 .50 .50 .50 .50 .25 .25 .50 .25 .50 B Bottom View Side View .80 .80 .80 4.78 4.78 4.78 4.78 4.78 4.78 .25 .25 .25 2.78 A 2.78 2.78 4.78 4.78 A 4.78 RECOMMENDED PCB SOLDER PAD 4.78 4.78 .97 4.78 RECOMMENDED PCB SOLDER PAD Recommended PCB Solder RECOMMENDED PCB SOLDER PAD Pad STENCIL PATTERN RECOMMENDED (HATCHED AREA IS OPENING) 6 56 4 5 ALL DIME ALL DIMEN ALL DIMENSIONS ARE RECOMMENDED STENCIL PATTERN UNLESS OTHERWISE SPECIFIED RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN (HATCHED AREA ISStencil OPENING) Recommended Pattern AND AFTER FINISH. (HATCHED AREA ISMILLIMETERS OPENING) TOLERANCE UNLESS SPECIFIED: (Shaded Area Is .XX Open) ± .25 .XXX ± X° ± THIRD ANGLE PROJECTION 6 .97 .97 5 3 .125 .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° 4 4 SURFACE FINISH: 1.6 ± .13MM UNLESS OTHERWISE NOTED DATE DRAWN BY D. CRONIN 2/2/14 CHECK DATE -- -- APPROVED DATE THIRD ANGLE PROJECTION TITLE -THIRD -ANGLE PROJECTION UNLESS OTHERWISE SPECI DIMENSIONSSPECIFIE ARE IN UNLESS OTHERWISE MILLIMETERS ANDARE AFTER DIMENSIONS IN FIN MILLIMETERS AND AFTERSPECI FINIS TOLERANCE UNLESS .XX SPECIFIE ± . TOLERANCE UNLESS .XX.XXX± ± .25. X° ± ± .125 . .XXX X° METAL ± PARTS .5 ° FOR SHEET FOR SHEET METAL .X PARTS ± ON OUTLINE DRAWING, X1 MATERIAL -- SIZE FINAL PROTECTIVE FINISH -2 3 3 SCALE C .X .XX± ± 1.5. .XX.XXX± ± .75. X° ± ± .25. .XXX X° ± .5 1.° SURFACE FINISH: 1.6 SURFACE FINISH: DRAWING NO. 2610-0 16.000 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 20 6 5 4 3 REVISIONS 4.00[.157] DESCRIPTION REV BY DATE APP'D POCKET SIZE D 2.00[.079] 1 2 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Do1.50 P2 +.10 +.0039 .0591 -.00 -.0000 [ ] 1.75[.069] E1 Po Tape and Reel Ao - 5.40mm [.213"] Bo - 5.40mm [.213"] Ko - 3.35mm [.132"] 3.0° XLamp ® XM-L EasyWhite ® LED D 5.40[.213] Bo 6 5 4 12.00[.472] All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. 6 5 4 5.50[.217]F C NOMINAL OF CREE INC. D D 10.25 [.404] E2 2 3 REV 12.30 [.484] MAX W 2.00[.079] 2.00[.079] P2 1.50[.059] 4.00[.157] D1 4.00[.157] Po 8.00[.315] P 3 C NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE CONTAINED WITHIN ARE THETHIS PROPRIETARY ANDINFORMATION CREE CONFIDENTIAL. PLOT AND THE CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT CONTAINED WITHIN AREOF THE PROPRIETARY AND MAY NOT BE COPIED, INFORMATION REPRODUCEDOF ORCREE, DISCLOSED TO PLOT ANY CONFIDENTIAL INC. THIS UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT B 6 5 C NOTICE TIAL. THIS PLOT AND THE INFORMATION HIN ARE THE PROPRIETARY AND NFORMATION OF CREE, INC. THIS PLOT PIED, REPRODUCED OR DISCLOSED TO ANY PERSON WITHOUTTHE WRITTEN CONSENT A Ao B 3.0° 2 B APP'D DATE APP'D D C BY DATE DDS 11/8/10 DC 2/26/12 B BS MATERIAL SIZE FINAL PROTECTIVE FINISH Direction 6 6 2402-00011 7.0° 2 4 Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape 5 pockets min.) (40 empty 5 A SHEET 7.0° OF B 1 3 2 1 2400-00009 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 12 INDEX QTY ITEM COMMENTS 1 1 2400-00009-CORE DRAWN BY C DATE UNLESS OTHERWISE SPECIFIED DATE DRAWN BY 2 SPECIFIED 2 D. CRONIN 2400-00009-REEL 4/23/10 UNLESS ARE OTHERWISE DIMENSIONS IN INCHES D. CRONIN 4/23/10 DATE DIMENSIONS ARE IN INCHESCHECK AND AFTER FINISH. CHECK DATE AND AFTERSPECIFIED: FINISH. TOLERANCE UNLESS TOLERANCE .XX ± UNLESS .01 SPECIFIED: APPROVED DATE TITLE ± .01 .XXX .XX ± .005 APPROVED DATE TITLE X° ±.XXX .5± ° .005 THIRD ANGLE PROJECTION MATERIAL X° PARTS ± .5 ° FOR SHEET METAL ONLY THIRD ANGLE PROJECTION MATERIAL FOR.XSHEET ± METAL .06 PARTS ONLY DRAWING NO. SIZE .XX .X ± ±.03 .06 DRAWING NO. SIZE FINAL PROTECTIVE FINISH ± .03 .XXX .XX ± .010 FINAL PROTECTIVE FINISH X° ±.XXX .5± ° .010 SCALE X° ± .5 ° SURFACE FINISH: 63 SCALE DRAWING SCALE SURFACE FINISH: 63 DRAWING SCALE 4600 Silicon Drive Durham, N.C 27703 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558 XMXM 5050 CARRIER TAPE 5050 CARRIER TAPE D 2402-00011 A 2402-00011 A A 4 3 4 2 3 2 SHEET OF SHEET 1 1OF / 1 1 12.4 +.2 .0 MEASURED AT HUB C 330 +.25 -.75 16.4 +0.2 .0 MEASURED AT HUB THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SURFACE FINISH: 5 4 1.6 3 1.9±.4 DATE DRAWN BY D. CRONIN CHECK 21 ±.4 4600 Silicon Drive Durham, N.C 27703 06/08/10 DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- MATERIAL TITLE 13.1 ±.2 -- SIZE FINAL PROTECTIVE FINISH -- SCALE XM LOADING SPEC REV. DRAWING NO. C 2402-00012 SHEET 3.000 2 B OF B 1 /1 1 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV DESCRIPTION A BY DATE APP'D Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. UNLESS OTHERWISE SPECIFIED DRAWN BY THIRD ANGLE PROJECTION DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY D. CRONIN CHECK DATE 4600 Silicon Drive Durham, N.C 27703 09/29/09 21 DATE -APPROVED -MATERIAL Phone (919) 313-5300 -- Fax (919) 313-5558 DATE -- A REV. B C B 1 /1 3.35 1.75 3.35[.132] 3.35[.132] Ko Ko START Ao REV. DRAWING NO. DRAWING SCALE ANODE SIDE A A SCALE D .36[.014] T .36[.014] T A XM 5050 CARRIER TAPE 5.40[.213] 5.40[.213] Ao Loaded Pockets (1000 Lamps) 1.50[.059] Phone (919) 313-5300 Fax (919) 313-5558 D1 1.50[.059] D1 8.00[.315] DATE 8.00[.315] P TITLE P CATHODE SIDE 4 5 4600 Silicon Drive Durham, N.C 27703 4/23/10 DATE APPROVED FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° 8 6 D. CRONIN CHECK 3 A B C APP'D DATE DRAWN BY UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 6 D 5.40[.213] 5.40[.213] Bo Bo 3.0° 1 DESCRIPTION A 4 Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) 12.00[.472] 12.00[.472] NOMINAL REVISONS NOMINAL 10.25 12.30 [.484] 12.30 [.484] 10.25 Loaded pocket count was 750 MAX [.404] [.404] W MAX MADE CATHODE AND ANODE NOTE LARGER E2 W E2 REV 63 SURFACE FINISH: User Feed 5 D 5.50[.217]F 5.50[.217]F DATE CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 THIRD ANGLE PROJECTION END 3 3.35[.132] Ko 5.40[.213] 6 4 C BY BoBo - - 5.40mm [.213"] 5.40mm [.213"] KoKo - - 3.35mm [.132"] 3.35mm [.132"] B 7.0° BY POCKET SIZE POCKET SIZE AoAo - - 5.40mm [.213"] 5.40mm [.213"] 1.75[.069] E1 1.75[.069] E1 .36[.014] T Po 1 All dimensions in mm. REV +.10 +.0039 Do1.50 .0591 +.0039 -.00 +.10 .0591 -.0000 [] Do1.50 -.00 -.0000 [ ] P2 1 2 REVISIONS REVISIONS DESCRIPTION DESCRIPTION TITLE REEL, 13" X 12MM, 3 PIECE SNAP A REV. A 1 /1 A XLamp ® XM-L EasyWhite ® LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22