CLD-DS76 Rev 2D Product family data sheet Cree® XLamp® MK-R2 LEDs Product Description FEATURES Table of Contents The XLamp® MK-R2 EasyWhite® LED • Available in 4-step and 2-step Characteristics.........................................2 builds on the breakthrough performance of the original high‑voltage MK-R driver by enabling solutions while EasyWhite bins at 2700 K & 3000 K, Flux Characteristics, Standard Order 80‑CRI minimum Codes and Bins........................................2 • Maximum drive current: 420 mA Relative Spectral Power Distribution......3 providing a small, uniform, single point • Low thermal resistance: 1.7 °C/W Relative Flux vs. Junction Temperature.. 3 source for precise optical control. The • Maximum junction temperature: Electrical Characteristics.........................4 MK‑R2 shares the same mechanical 150 °C • Binned at 85 °C Relative Chromaticity vs. Current............5 customers with a seamless upgrade path • Viewing angle: 120° Relative Chromaticity vs. Temperature...5 and shortening the LED luminaire and • Unlimited floor life at Typical Spatial Distribution......................6 retrofit lamp design cycle. ≤ 30 ºC/85% RH • Reflow solderable - JEDEC MK-R2 LEDs are designed for high‑output, J‑STD‑020C Thermal Design........................................6 Performance Groups - Brightness..........7 Performance Groups - Chromaticity.......7 • Electrically neutral thermal path Cree EasyWhite® Bins Plotted on the are the ideal replacement for lighting • RoHS and REACh compliant 1931 CIE Color Space..............................8 applications that currently use inefficient • UL® recognized component Bin and Order Code Formats...................8 directional lighting applications and halogen lamps. MK-R2 LEDs are optimized for use in track, accent, lamp retrofit, www.cree.com/Xlamp Relative Flux vs. Current..........................4 footprint as the original MK‑R, providing (E349212) Reflow Soldering Characteristics............9 Notes......................................................10 downlighting and other applications Mechanical Dimensions........................12 where color quality, consistency and Tape and Reel.........................................13 optical control are required. Packaging...............................................14 Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® MK-R2 LED Characteristics Characteristics Unit Thermal resistance, junction to solder point °C/W 1.7 degrees 120 mV/°C -28 Viewing angle - full width half maximum (FWHM) Temperature coefficient of voltage ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current mA 420 Reverse current mA 100 Forward voltage (@ 233 mA, 85 °C) V 36 Forward voltage (@ 233 mA, 25 °C) V 42 LED junction temperature °C 150 Flux Characteristics, Standard Order Codes and Bins (If = 233 mA, TJ = 85 °C) The following tables provide order codes for XLamp MK‑R2 EasyWhite LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 8). Minimum Luminous Flux Color CCT Range 3000 K 80‑CRI EasyWhite 2700 K Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 961 G2 780 893 G2 780 893 F4 730 847 2-Step Chromaticity Region 30H 27H 4-Step Order Code MKRBWT-00-0000-0N0HG430H MKRBWT-00-0000-0N0HG230H MKRBWT-00-0000-0N0HG227H MKRBWT-00-0000-0N0HF427H Chromaticity Region 30F 27F Order Code MKRBWT-00-0000-0N0HG430F MKRBWT-00-0000-0N0HG230F MKRBWT-00-0000-0N0HG227F MKRBWT-00-0000-0N0HF427F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 10). • Minimum CRI for 80-CRI White is 80. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® MK-R2 LED Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 80 60 Warm White 40 20 0 380 430 480 530 580 630 680 Relative Flux Output vs. Junction Temperature Wavelength (nm) 730 780 Relative Flux vs. Junction Temperature (IF = 233 mA) 120 Relative Luminous Flux (%) 100 80 60 40 20 0 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® MK-R2 LED Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 85 °C) 450 400 Forward Current (mA) 350 300 250 200 150 100 50 0 33.0 34.0 35.0 36.0 37.0 38.0 Forward Voltage (V) Relative Intensity vs. Current (Tj = 85ºC) Relative Flux vs. Current (TJ = 85 °C) Relative Luminous Flux (%) 180 150 120 90 60 30 0 0 50 100 150 200 250 300 350 400 450 Forward Current (mA) Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® MK-R2 LED Relative Chromaticity Vs. Current - Warm White Relative Chromaticity vs. Current - Warm White (TJ = 85 °C) 0.005 0.004 0.003 0.002 0.001 0.000 ΔCCx ΔCCy -0.001 -0.002 -0.003 -0.004 -0.005 -0.006 0 50 100 150 200 250 300 350 400 450 Current (mA) Relative Chromaticity Vs. Temperature - Warm White ΔCCx Relative Chromaticity vs. Temperature - Warm White (IF = 233 mA) 0.005 0.004 0.003 0.002 0.001 0.000 ΔCCx -0.001 ΔCCy -0.002 -0.003 -0.004 -0.005 -0.006 0 25 50 75 100 125 150 Tsp (°C) Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® MK-R2 LED Typical Spatial Radiation Pattern Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle (º) Thermal Design Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 450 Maximum Current (mA) 400 350 300 250 200 Rj-a = 2°C/W 150 Rj-a = 4°C/W 100 Rj-a = 6°C/W 50 0 Rj-a = 8°C/W 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® MK-R2 LED Performance Groups - Brightness (If = 233 mA, Tj = 85 °C) XLamp MK-R2 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux D2 510 550 D4 550 590 E2 590 635 E4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 Performance Groups - Chromaticity (Tj = 85 °C) XLamp MK‑R2 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code 30F 27F CCT 3000 K 2700 K EasyWhite Color Temperatures – 2-Step x y 0.4242 0.4322 0.4449 0.4141 0.4359 0.4475 Code x y 0.3919 0.4291 0.3973 0.4096 0.4333 0.4062 0.4395 0.4084 0.3960 0.4351 0.3994 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 30H 27H CCT 3000 K 2700 K Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® MK-R2 LED Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) Bin and Order Code Formats Bin codes and order codes are configured as follows. Order CodeBin Code Series = MKR Series = MKR Internal code Internal code Forward voltage class N: Default (36 V) Luminous flux group CRI specification H: 80-CRI minimum SSSCCC-HH-HHHH-GHKLNNNNN Kit code Internal code SSSCCC-E-DDD-MM-HK-L-PP CRI specification H: 80-CRI minimum Internal code Forward voltage class N: Default (36 V) Color BWT = White Chromaticity bin Color BWT = White Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® MK-R2 LED Reflow Soldering Characteristics In testing, Cree has found XLamp MK-R2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) IPC/JEDEC J-STD-020C Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® MK-R2 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MK-R2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® MK-R2 LED Notes - Continued UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® MK-R2 LED 6 5 4 3 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. D All measurements are ±.13 mm unless otherwise indicated. 7.00 4.08 6.70 .73 6 5 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT 4 NOT BE COPIED, 3 4 3 MAY REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 4 D 4.08 4.08 .73 .73 .73 4 3 2 2 3 2 7.00 REV B B VIEWS SHOW LATEST REVISION VIEWS SHOW LATEST REVISIONDC VIEWSBSHOW LATEST REVISION D D TO BACKSIDE D ISNOTCH NOTCH IS ADDED TO BACKSIDE DC NOTCH ADDEDIS TOADDED BACKSIDE E E VIEWS ALL VIEWS EUPDATEDUPDATED ALL VIEWSALLUPDATED DESCRIPTIONDESCRIPTION 1 REVISONS REV REV 1 1 REVISONS REVISONS BY DATE BY DESCRIPTION DC DATE BY APP'D DATE APP'D 6.70 6.70 R 3.25 Top View 4.08 6.70 REF. .70 6.70 REF. .70 Side View .73 6.70 .70 .70 .70.70 .70 8/5/13DC DC 7/7/14 7/7/14DC 7/7/14 DC 6/19/15 DC 6/19/15 6/19/15 6.70 .70 .70 6.70 REF. 6.70 6.70 6.70 3.90D D .70 6.76 6.76 6.76 6.76 REF. 6.76 REF. C PRIMARY .70 6.76.25 REF. Anode 3.90 6.70 View 1.24 1.29 .70 6.70 .70 .25 A .25 ALTERNA Alternate Bottom ALTERNATIVE ALTERNATIVE ALTERNATIVE Alternate Bottom View ALTERNATIVE ALTERNATIVE ALTERNATIVE PRIMARY 3.90 .70 B .70 .25 .25 PRIMARY 3.90 .70 .25 C 3.90 Anode 6.76 6.76 .70 3.90 Bottom View PRIMARY PRIMARY 0 .76 .70 6.76 REF. C C 1.29 .70 R 3.25 6.76 REF. 6.76 REF. B Anode 6.70 REF. D 6.76 .70 .70 6.76 8/5/13 7.00 R 3.25 APP'D DC 8/5/13 C 7.00 4.08 .70 .70 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPENING1.29 RECOMMENDED PCB SOLDER PAD .70 UNLESS D MILLIMET TOLERA BTHIRD ANGLE PROJECTION B B 1.29 1.29 6.76 1.29 6.76 FOR SH .25 SURFA 6.76 6.76 .25 .25 .25 6 5 4 3.90 1.29 1.29 6.70 A 1.29 6.70 6.70 1.24 1.24 1.29 6.70 1.24 3 6.70 1.24 RECOMMENDED PCB SOLDER PAD Recommended PCB Solder PadSPECIFIED UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE DRAWN BY DRAWN BYDATE DATEBY DRAWN DATE (Shaded Area Is Open) CRONIN 11/7/12 D. CRONIN 11/7/12 D. 11/7/12 ARE DIMENSIONS IN ARE IN D. CRONIN DIMENSIONSDIMENSIONS ARE IN DATE CHECK DATE ANDMILLIMETERS AFTER FINISH. CHECK AND AFTER CHECK FINISH. DATE MILLIMETERSMILLIMETERS AND AFTER FINISH. RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: TOLERANCE TOLERANCE UNLESS SPECIFIED: .25 APPROVED .XX ± APPROVED .25 DATE DATE IS OPENING .XX ± .XX .25 ± APPROVED DATE SHADED AREA IS OPENING SHADEDSHADED AREA ISAREA OPENING TITLE ± .125.XXX ± TITLE .125 notice. Cree ® ® ® TITLE .XXX ± .XXX .125 to Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject change without , XLamp and EasyWhite X° .5 ° X° ± .5 ° X° ± .5 ° ± ® THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. MATERIAL MATERIAL MATERIAL FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY .X1.5 ± 1.5 .X ± 1.5 .X ± 6 5 4 SIZE DRAWING NO. SIZE DRAWING NO. SIZE .75 .XX ± .75 .XX ± .XX .75 ± ± .25 FINAL FINAL .XXX ± FINISH .25PROTECTIVE FINISH FINAL PROTECTIVE FINISH .XXX ± .XXX .25 PROTECTIVE X° ± .5 ° X° ± .5 ° X° ± .5 ° 4600 Silicon Drive 4600 Silicon Drive 4600 Silicon Drive THIRD Durham, N.C 27703ANGLE Durham, PROJECTION N.C 27703 Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558 Fax (919) 313-5558 A A C C 1.6 SCALE SCALE 11.000 11.000 DRAWING NO. 11.000 SHEET SHEET OF OF 1 /1 SHEET 1 /1 FOR SHEET METAL PARTS O .X ± 1 .XX ± .7 .XXX ± .2 is a X° ± .5 SURFACE FINISH: 3 REV. REV. REV. 2610-00031 2610-00031 C 2610-00031 E E SCALE A are registered trademarks and the Cree logo MKR Marketing Spec MKR Marketing Spec MKR Marketing Spec 1.6 1.6 SURFACE FINISH: SURFACE FINISH: SURFACE FINISH: UNLESS OTHERWISE SPECIF DIMENSIONS ARE IN MILLIMETERS AND AFTER FIN TOLERANCE UNLESS SPECIF .XX ± .2 .XXX ± .1 X° ± .5 RECOMMENDED STENCIL PATTERN Recommended Stencil Pattern SHADED AREA IS OPENING E OF 1 /1 12 1.6 XLamp ® MK-R2 LED 6 5 4 3 2 Tape and Reel 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV A DESCRIPTION BY DATE Initial Release DC 12/7/12 APP'D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm. D D 1.5± .1 User Feed Direction 12±.1 END 4±.10 1.75 ±.10 START CATHODE SIDE 4.31 16 +.3 -.0 C 7.4 C 0.36 ANODE SIDE Trailer 180mm (min) of empty pockets 6 sealed with tape (15 pockets min.) NOTICE Leader 420mm (min) of empty pockets sealed with tape (35 pockets min.) Loaded Pockets (1000 Lamps) 5 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 4 3 User Feed Direction 2 1 2400-00009 INDEX QTY ITEM 1 2 1 2 2400-00009-CORE 2400-00009-REEL COMMENTS B B D D 13mm A 12.4 +.2 .0 MEASURED AT HUBTHIRD ANGLE PROJECTION 13 " C UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° DATE DRAWN BY D. CRONIN CHECK 6 5 4 Phone (919) 313-5300 -- C A Fax (919) 313-5558 DATE -- -- TITLE MKR LOADING SPEC MATERIAL -- SIZE -- 3 SCALE 2402-00025 A SHEET 3.000 2 16.4 +0.2 .0 MEASURED AT HUB REV. DRAWING NO. C FINAL PROTECTIVE FINISH SURFACE FINISH: 1.6 330 +.25 -.75 4600 Silicon Drive Durham, N.C 27703 12/7/12 DATE -APPROVED OF 1 /1 1 1.9±.4 21 ±.4 13.1 ±.2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° A BY DESCRIPTION DATE APP'D DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 09/29/09 CHECK DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- TITLE REEL, 13" X 12MM, 3 PIECE SNAP Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree logo is a ANTI-STATIC HIPS trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. THIRD ANGLE PROJECTION ® FOR SHEET®METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH: 6 5 4 3 63 MATERIAL ® SIZE FINAL PROTECTIVE FINISH 2 SCALE C 0.500 REV. DRAWING NO. 2400-00009 SHEET 1 A OF 13 1 /1 XLamp ® MK-R2 LED Packaging Humidity Indicator Card (inside bag) Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14