ds XQE

Cree® XLamp® XQ-E LEDs
CLD-DS83 Rev 6A
Product family data sheet
XQ-E High Density LEDs
XQ-E High Intensity LEDs
Product Description
FEATURES
Table of Contents
The XLamp® XQ-E LEDs are available
• Cree’s smallest lighting class LED:
Characteristics.............................................2
in two versions: high density and
high intensity. The XQ-E High Density
1.6 mm X 1.6 mm
• Available in high‑density &
Flux Characteristics - High Density White..3
Flux Characteristics - High Density Color...4
LED enables lighting manufacturers
high‑intensity versions for design
Flux Characteristics - High Intensity
to significantly reduce the size and
flexibility
White ............................................................6
total cost of their LED luminaires
versus similar performance 3.5‑mm
footprint
LEDs,
without
sacrificing
lumen output, efficacy or reliability.
The
XQ-E’s
combination
of
optical
symmetry, consistent design across all
configurations and tiny 1.6 mm X 1.6 mm
footprint simplifies manufacturing and
design while providing excellent color
mixing.
• Available in 70, 80, & 90 CRI white,
Flux Characteristics - High Intensity
royal blue, blue, green, PC amber,
Color.............................................................7
red‑orange, red & photo red
Relative Spectral Power Distribution..........9
• Maximum drive current: 1 A (high
Relative Flux vs. Junction
density & high intensity)
Temperature.............................................. 11
• Reflow solderable - JEDEC
Electrical Characteristics.......................... 14
J-STD‑020C compatible
• Unlimited floor life at
≤ 30 °C/85% RH
• RoHS- and REACh‑compliant
• UL recognized component (E349212)
®
Relative Flux vs. Current........................... 16
Typical Spatial Distribution....................... 19
Thermal Design......................................... 21
Reflow Soldering Characteristics............. 23
Notes......................................................... 24
The new XQ-E High Intensity LED uses an
Mechanical Dimensions........................... 26
innovative primary optic design optimized
Tape and Reel............................................ 28
to deliver maximum candela, especially
Packaging.................................................. 30
www.cree.com/Xlamp
through narrow‑beam secondary optics.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XQ-E LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point - white, royal blue, blue
°C/W
6
Thermal resistance, junction to solder point - green
°C/W
9
Thermal resistance, junction to solder point - PC amber
°C/W
8
Thermal resistance, junction to solder point - red‑orange, red, photo red
Minimum
Typical
°C/W
5
Viewing angle (FWHM) - High Density white
degrees
110
Viewing angle (FWHM) - High Density royal blue, blue, green, PC amber
degrees
125
Viewing angle (FWHM) - High Density red‑orange, red, photo red
degrees
130
Viewing angle (FWHM) - High Intensity white
degrees
120
Viewing angle (FWHM) - High Intensity royal blue, blue, green
degrees
130
Viewing angle (FWHM) - High Intensity PC amber
degrees
120
Viewing angle (FWHM) - High Intensity red‑orange, red
degrees
125
Temperature coefficient of voltage - white
mV/°C
-2.3
Temperature coefficient of voltage - royal blue, blue
mV/°C
-3.3
Temperature coefficient of voltage - green
mV/°C
-3.8
Temperature coefficient of voltage - PC amber
mV/°C
-3.3
Temperature coefficient of voltage - red‑orange, red
mV/°C
-1.8
Temperature coefficient of voltage - photo red
mV/°C
-2.8
ESD withstand voltage (HBM per Mil-Std-883D)- High Density
V
ESD classification (HBM per Mil-Std-883D) - High Intensity
DC forward current
Reverse voltage
Maximum
8000
Class 3A
mA
1000
V
5
Forward voltage (@ 350 mA, 85 °C) - white
V
2.9
3.25
Forward voltage (@ 350 mA, 25 °C) - royal blue, blue
V
3.1
3.5
Forward voltage (@ 350 mA, 25 °C) - green
V
3.2
3.6
Forward voltage (@ 350 mA, 25 °C) - PC amber
V
3.1
3.5
Forward voltage (@ 350 mA, 25 °C) - red‑orange, red, photo red
V
2.2
2.6
LED junction temperature
°C
150
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® XQ-E LED
Flux Characteristics - High Density White (TJ = 85 °C)
The following table provides several base order codes for XLamp XQ-E High Density white LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
CCT Range
Color
Cool White
70-CRI
White
Neutral
White
Warm White
80-CRI
White
90-CRI
White
Minimum
Maximum
5000 K
8300 K
3700 K
3700 K
2700 K
2700 K
2850 K
8300 K
5300 K
3500 K
3500 K
3000 K
Minimum Luminous Flux (lm)
@ 350 mA
Calculated Minimum
Luminous Flux (lm)**
@ 85 °C
Group
Flux (lm) @
85 °C
Flux (lm) @
25 °C*
700 mA
1.0 A
R3
122
141
210
270
Order Code
XQEAWT-00-0000-00000LFE1
R2
114
132
196
252
XQEAWT-00-0000-00000LEE1
R3
122
141
210
270
XQEAWT-00-0000-00000BFE1
R2
114
132
196
252
XQEAWT-00-0000-00000BEE1
R2
114
132
196
252
XQEAWT-00-0000-00000LEE4
Q5
107
124
184
237
XQEAWT-00-0000-00000LDE4
Q4
100
116
172
221
XQEAWT-00-0000-00000LCE4
Q5
107
124
184
237
XQEAWT-00-0000-00000LDE7
Q4
100
116
172
221
XQEAWT-00-0000-00000LCE7
Q3
93.9
109
162
208
XQEAWT-00-0000-00000LBE7
Q2
87.4
101
150
193
XQEAWT-00-0000-00000LAE7
Q5
107
124
184
237
XQEAWT-00-0000-00000HDE7
Q4
100
116
172
221
XQEAWT-00-0000-00000HCE7
Q3
93.9
109
162
208
XQEAWT-00-0000-00000HBE7
Q2
87.4
101
150
193
XQEAWT-00-0000-00000HAE7
P4
80.6
93.3
139
178
XQEAWT-00-0000-00000U9E7
P3
73.9
85.5
127
163
XQEAWT-00-0000-00000U8E7
P2
67.2
77.8
116
149
XQEAWT-00-0000-00000U7E7
N4
62
71.7
107
137
XQEAWT-00-0000-00000U6E7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 24).
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 70.
• Typical CRI for Neutral White (3700 K – 5300 K CCT) is 75.
• Typical CRI for Warm White (2700 K – 3500 K CCT) is 80.
• Minimum CRI for 70-CRI White is 70.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® XQ-E LED
Flux Characteristics - High Density Color (TJ = 25 °C)
The following tables provide several base order codes for XLamp XQ-E High Density color LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Dominant Wavelength Range
Minimum
Color
Group
Royal
Blue
D36
DWL
(nm)
450
Maximum
Group
D57
DWL
(nm)
465
Dominant Wavelength Range
Color
Minimum
Group
Blue
B3
DWL
(nm)
465
Maximum
Group
B6
DWL
(nm)
485
Dominant Wavelength Range
Color
Minimum
Group
Green
G2
DWL
(nm)
520
Maximum
Group
G4
DWL
(nm)
535
Minimum Radiant Flux
(mW) @ 350 mA
Order Code
Group
Flux (mW)
36 (Q)
600
XQEROY-00-0000-000000Q01
35 (P)
575
XQEROY-00-0000-000000P01
34 (N)
550
XQEROY-00-0000-000000N01
33 (M)
525
XQEROY-00-0000-000000M01
32 (L)
500
XQEROY-00-0000-000000L01
31 (K)
475
XQEROY-00-0000-000000K01
30 (J)
450
XQEROY-00-0000-000000J01
Minimum Luminous
Flux (lm) @ 350 mA
Order Code
Group
Flux (lm)
M3
45.7
XQEBLU-00-0000-000000301
M2
39.8
XQEBLU-00-0000-000000201
K3
35.2
XQEBLU-00-0000-000000Z01
K2
30.6
XQEBLU-00-0000-000000Y01
Minimum Luminous
Flux (lm) @ 350 mA
Order Code
Group
Flux (lm)
R2
114
XQEGRN-00-0000-000000E01
Q5
107
XQEGRN-00-0000-000000D01
Q4
100
XQEGRN-00-0000-000000C01
Q3
93.9
XQEGRN-00-0000-000000B01
Note
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® XQ-E LED
Flux Characteristics - High Density Color (TJ = 25 °C) - Continued
Color
Minimum Luminous Flux
(lm) @ 350 mA
Color Bin
PC Amber
Flux (lm) @
25 °C*
P4
80.6
XQEAPA-00-0000-000000901
P3
73.9
XQEAPA-00-0000-000000801
Y2
Dominant Wavelength Range
Color
Minimum
DWL
(nm)
Group
RedOrange
O3
610
Maximum
DWL
(nm)
Group
O4
620
Dominant Wavelength Range
Color
Minimum
DWL
(nm)
Group
Red
R2
620
Maximum
DWL
(nm)
Group
R3
630
Peak Wavelength Range
Min.
Color
Photo
Red
Order Code
Group
Minimum Luminous
Flux (lm) @ 350 mA
Group
Flux (lm)
Q3
93.9
XQERDO-00-0000-000000B01
Q2
87.4
XQERDO-00-0000-000000A01
P4
80.6
XQERDO-00-0000-000000901
P3
73.9
XQERDO-00-0000-000000801
P2
67.2
XQERDO-00-0000-000000701
Minimum Luminous
Flux (lm) @ 350 mA
Group
PWL
(nm)
Group
PWL
(nm)
P2
650
P5
670
Order Code
Group
Flux (lm)
P3
73.9
XQERED-00-0000-000000801
P2
67.2
XQERED-00-0000-000000701
N4
62
XQERED-00-0000-000000601
N3
56.8
XQERED-00-0000-000000501
Minimum Radiant Flux
(mW) @ 350 mA
Max.
Order Code
Order Code
Group
Flux (mW)
14
350
XQEPHR-00-0000-000000901
13
300
XQEPHR-00-0000-000000801
Note
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® XQ-E LED
Flux Characteristics - High Intensity White (TJ = 85 °C)
The following table provides several base order codes for XLamp XQ-E High Intensity white LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
CCT Range
Color
Cool White
70-CRI
White
Neutral
White
Warm White
80-CRI
White
90-CRI
White
Minimum
Maximum
5000 K
8300 K
3700 K
3700 K
2700 K
2700 K
2850 K
8300 K
5300 K
3500 K
3500 K
3000 K
Minimum Luminous Flux (lm)
@ 350 mA
Calculated Minimum
Luminous Flux (lm)**
@ 85 °C
Group
Flux (lm) @
85 °C
Flux (lm) @
25 °C*
700 mA
1.0 A
R3
122
136
213
276
Order Code
XQEAWT-H0-0000-00000LFE1
R2
114
127
199
258
XQEAWT-H0-0000-00000LEE1
R3
122
136
213
276
XQEAWT-H0-0000-00000BFE1
R2
114
127
199
258
XQEAWT-H0-0000-00000BEE1
R2
114
127
199
258
XQEAWT-H0-0000-00000LEE4
Q5
107
119
187
242
XQEAWT-H0-0000-00000LDE4
Q4
100
111
175
226
XQEAWT-H0-0000-00000LCE4
Q5
107
119
187
242
XQEAWT-H0-0000-00000LDE7
Q4
100
111
175
226
XQEAWT-H0-0000-00000LCE7
Q3
93.9
105
164
213
XQEAWT-H0-0000-00000LBE7
Q5
107
119
187
242
XQEAWT-H0-0000-00000HDE7
Q4
100
111
175
226
XQEAWT-H0-0000-00000HCE7
Q3
93.9
105
164
213
XQEAWT-H0-0000-00000HBE7
P4
80.6
89.9
141
182
XQEAWT-H0-0000-00000U9E7
P3
73.9
82.4
129
167
XQEAWT-H0-0000-00000U8E7
P2
67.2
74.9
117
152
XQEAWT-H0-0000-00000U7E7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 24).
• Typical CRI for Cool White (5000 K – 8300 K CCT) is 70.
• Typical CRI for Neutral White (3700 K – 5300 K CCT) is 75.
• Typical CRI for Warm White (2700 K – 3500 K CCT) is 80.
• Minimum CRI for 70-CRI White is 70.
• Minimum CRI for 80-CRI White is 80.
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25 °C are calculated and for reference only.
** Calculated flux values at 700 mA and 1 A are for reference only.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® XQ-E LED
Flux Characteristics - High Intensity Color (TJ = 25 °C)
The following tables provide several base order codes for XLamp XQ-E High Intensity color LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Dominant Wavelength Range
Color
Minimum
DWL
(nm)
Group
Royal
Blue
Maximum
D36
DWL
(nm)
Group
450
D57
465
Dominant Wavelength Range
Color
Minimum
DWL
(nm)
Group
Blue
Maximum
B3
DWL
(nm)
Group
465
B6
485
Dominant Wavelength Range
Color
Minimum
Group
Green
G2
Color
PC Amber
Maximum
DWL
(nm)
Group
520
G4
Color Bin
Y2
DWL
(nm)
535
Minimum Radiant Flux
(mW) @ 350 mA
Order Code
Group
Flux (mW)
35 (P)
575
XQEROY-H0-0000-000000P01
34 (N)
550
XQEROY-H0-0000-000000N01
33 (M)
525
XQEROY-H0-0000-000000M01
Minimum Luminous
Flux (lm) @ 350 mA
Order Code
Group
Flux (lm)
M2
39.8
XQEBLU-H0-0000-000000201
K3
35.2
XQEBLU-H0-0000-000000Z01
K2
30.6
XQEBLU-H0-0000-000000Y01
Minimum Luminous
Flux (lm) @ 350 mA
Order Code
Group
Flux (lm)
Q5
107
XQEGRN-H0-0000-000000D01
Q4
100
XQEGRN-H0-0000-000000C01
Q3
93.9
XQEGRN-H0-0000-000000B01
Q2
87.4
XQEGRN-H0-0000-000000A01
P4
80.6
XQEGRN-H0-0000-000000901
Minimum Luminous Flux
(lm) @ 350 mA
Order Code
Group
Flux (lm) @
25 °C*
P3
73.9
XQEAPA-H0-0000-000000801
P2
67.2
XQEAPA-H0-0000-000000701
Note
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® XQ-E LED
Flux Characteristics - High Intensity Color (TJ = 25 °C) - Continued
Dominant Wavelength Range
Color
Minimum
Group
RedOrange
O3
DWL
(nm)
610
Maximum
Group
O4
DWL
(nm)
620
Dominant Wavelength Range
Color
Red
Minimum
Maximum
Group
DWL
(nm)
Group
DWL
(nm)
R2
620
R3
630
Minimum Luminous
Flux (lm) @ 350 mA
Order Code
Group
Flux (lm)
P3
73.9
XQERDO-H0-0000-000000801
P2
67.2
XQERDO-H0-0000-000000701
N4
62
XQERDO-H0-0000-000000601
Minimum Luminous
Flux (lm) @ 350 mA
Order Code
Group
Flux (lm)
N2
51.7
XQERED-H0-0000-000000401
M3
45.7
XQERED-H0-0000-000000301
Note
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® XQ-E LED
Relative Spectral Power
Relative Spectral Power Distribution
high density
High Density
100%
Relative Radiant Power
80%
60%
3000 K, 80 CRI
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Spectral Power
high density
High Density Color
100%
Relative Radiant Power
80%
Royal Blue
Blue
60%
Green
PC Amber
40%
Red-Orange
Red
Photo Red
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® XQ-E LED
Relative Spectral Power
Relative Spectral Power Distribution - Continued
high intensity
High Intensity
100%
Relative Radiant Power
80%
60%
3000 K, 80 CRI
40%
20%
0%
380
430
480
Relative Spectral Power
530
580
630
680
730
780
Wavelength (nm)
high intensity
High Intensity Color
100%
Relative Radiant Power
80%
Royal Blue
Blue
60%
Green
PC Amber
40%
Red-Orange
Red
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® XQ-E LED
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (IF = 350 mA)
high density
High Density
120%
Relative Luminous Flux
100%
80%
60%
White
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Relative Flux Output vs. Junction Temperature
high density
High Density Color
120%
Relative Radiant Flux
100%
80%
Royal Blue
60%
Photo Red
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® XQ-E LED
Relative Flux Output vs. Junction Temperature
Relative Flux
Junction Temperature (IF = 350 mA) - Continued
highvs.
density
High Density Color
120%
Relative Luminous Flux
100%
Blue
80%
Green
60%
PC Amber
Red-Orange
40%
Red
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Relative Flux Output vs. Junction Temperature
high intensity
High Intensity
120%
Relative Luminous Flux
100%
80%
60%
White
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® XQ-E LED
Relative Flux Output vs. Junction Temperature
Relative Flux
vs. Junction Temperature (IF = 350 mA) - Continued
high intensity
High Intensity Color
120%
Relative Radiant Flux
100%
80%
Royal Blue
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Relative Flux Output vs. Junction Temperature
high intensity
High Intensity Color
120%
Relative Luminous Flux
100%
Blue
80%
Green
PC Amber
60%
Red-Orange
Red
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® XQ-E LED
Electrical Characteristics (Tj = 85ºC)
high density
Electrical Characteristics (TJ = 85 °C)
High Density
Forward Current (mA)
1000
800
600
White
400
200
0
1.90
2.10
2.30
2.50
2.70
2.90
Electrical CharacteristicsForward
(Tj =Voltage
85ºC)
(V)
3.10
3.30
3.50
3.70
high density
High Density Color
Forward Current (mA)
1000
800
Royal Blue, Blue
600
Green
PC Amber
400
Red-Orange, Red,
Photo Red
200
0
1.90
2.10
2.30
2.50
2.70
2.90
3.10
3.30
3.50
3.70
Forward Voltage (V)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® XQ-E LED
Electrical Characteristics (Tj = 85ºC)
high intensity
Electrical Characteristics (TJ = 25 °C) - Continued
High Intensity
1000
Forward Current (mA)
800
600
White
400
200
0
1.90
2.10
2.30
2.50
2.70
2.90
Electrical CharacteristicsForward
(Tj =Voltage
85ºC)
(V)
3.10
3.30
3.50
3.70
high intensity
High Intensity Color
Forward Current (mA)
1000
800
Royal Blue, Blue
600
Green
PC Amber
400
Red-Orange, Red
200
0
1.90
2.10
2.30
2.50
2.70
2.90
3.10
3.30
3.50
3.70
Forward Voltage (V)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® XQ-E LED
Relative Intensity vs. Current (Tj = 85ºC)
density
Relativehigh
Flux
vs. Current (TJ = 85 °C)
High Density
250%
Relative Luminous Flux
200%
150%
White
100%
50%
0%
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Relative Intensity vs. Current (Tj = 85ºC)
high density
High Density Color
300%
Relative Radiant Flux
250%
200%
Royal Blue
150%
Photo Red
100%
50%
0%
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® XQ-E LED
Intensity(Tvs.
Current
(Tj = 85ºC)
Relative Relative
Flux vs. Current
= 25 °C)
- Continued
J
high density
High Density Color
300%
Relative Luminous Flux
250%
200%
Blue
Green
PC Amber
150%
Red-Orange
Red
100%
50%
0%
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
High Intensity
250%
Relative Luminous Flux
200%
150%
White
100%
50%
0%
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® XQ-E LED
Intensity(Tvs.
Current
(Tj = 85ºC)
RelativeRelative
Flux vs. Current
= 25 °C)
- Continued
J
high intensity
High Intensity Color
250%
Relative Radiant Flux
200%
150%
Royal Blue
100%
50%
0%
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
High Intensity Color
300%
Relative Luminous Flux
250%
200%
Blue
Green
150%
PC Amber
Red-Orange
Red
100%
50%
0%
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® XQ-E LED
Typical
Spatial
Typical Spatial
Distribution
high density
Radiation Pattern-white
High Density
100%
Relative Luminous Intensity
80%
60%
White
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red
Angle (º)
high density
High Density Color
100%
Relative Luminous Intensity
80%
Royal Blue, Blue,
Green
60%
PC Amber
40%
Red-Orange, Red,
Photo Red
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® XQ-E LED
Typical Spatial Radiation Pattern-white
Typical Spatial
Distribution - Continued
high intensity
High Intensity
100%
Relative Luminous Intensity
80%
60%
White
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red
high intensity
High Intensity Color
100%
Relative Luminous Intensity
80%
Royal Blue, Blue,
Green
60%
PC Amber
40%
Red-Orange, Red
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® XQ-E LED
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Thermal Design - white
Thermal Design - royal blue, blue
highHigh
density &Density
high intensity
high density & high intensity
1200
1200
1000
1000
Maximum Current (mA)
Maximum Current (mA)
WhiteRoyal Blue, Blue
800
600
Rj-a = 10°C/W
400
Rj-a = 15°C/W
600
400
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
200
800
200
Rj-a = 20°C/W
Rj-a = 25°C/W
0
Rj-a = 25°C/W
0
0
20
40
60
80
100
Thermal Design - green Ambient Temperature (ºC)
120
140
160
0
20
40
60
80
40
60
80
100
120
140
160
60
80
100
120
140
160
Thermal Design - PC amber
Ambient Temperature (ºC)
100
120
140
160
high density & high intensity
high density
1200
1200
1000
1000
Maximum Current (mA)
Maximum Current (mA)
GreenPC Amber
800
600
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
800
600
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
Rj-a = 25°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
0
0
20
Rj-a = 30°C/W
40
60
80
100
120
140
0
160
0
20
Ambient Temperature (ºC)
Thermal Design - photo red
Ambient Temperature (ºC)
Thermal Design - red-orange, red
high density
high density & high intensity
1200
1200
1000
1000
Maximum Current (mA)
Maximum Current (mA)
Red-Orange, RedPhoto Red
800
600
400
Rj-a = 10°C/W
Rj-a = 15°C/W
600
400
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
200
800
Rj-a = 20°C/W
200
Rj-a = 25°C/W
0
0
20
Rj-a = 25°C/W
40
60
80
Ambient Temperature (ºC)
100
120
140
160
0
0
20
40
Ambient Temperature (ºC)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® XQ-E LED
Thermal Design - Continued
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
Thermal Design - white
Thermal Design - royal blue, blue
highHigh
density &Intensity
high intensity
high density & high intensity
1200
1200
1000
1000
Maximum Current (mA)
Maximum Current (mA)
WhiteRoyal Blue, Blue
800
600
Rj-a = 10°C/W
400
Rj-a = 15°C/W
800
600
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
Rj-a = 10°C/W
200
Rj-a = 20°C/W
Rj-a = 25°C/W
0
Rj-a = 25°C/W
0
0
20
40
Thermal Design - green
high intensity
60
80
100
Ambient Temperature (ºC)
120
140
160
0
20
40
60
80
100
120
140
60
80
100
120
140
Thermal Design - PC amber
Ambient Temperature (ºC)
160
high density & high intensity
1200
1200
1000
1000
Maximum Current (mA)
Maximum Current (mA)
GreenPC Amber
800
600
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
Rj-a = 25°C/W
800
600
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
Rj-a = 25°C/W
Rj-a = 30°C/W
0
0
20
Rj-a = 30°C/W
40
60
80
100
120
140
0
160
Ambient Temperature (ºC)
0
20
40
160
Ambient Temperature (ºC)
Thermal Design - red-orange, red
high density & high intensity
Red-Orange, Red
1200
Maximum Current (mA)
1000
800
600
400
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
200
Rj-a = 25°C/W
0
0
20
40
60
80
Ambient Temperature (ºC)
100
120
140
160
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® XQ-E LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XQ-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
IPC/JEDEC J-STD-020C
Time
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
65-150 seconds
217 °C
45-90 seconds
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® XQ-E LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XQ-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® XQ-E LED
Notes - Continued
UL® Recognized Component
Level 1 enclosure consideration. The LED package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical
enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® XQ-E LED
Mechanical Dimensions
Thermal vias, if present, are not shown on these drawings.
6
5
5
5
4
NOTICE
CE
DENTIAL.
THISAND
PLOT
AND
THE INFORMATION
L.
THIS
PLOT
THE
INFORMATION
THE
INFORMATION
WITHIN
ARE
THE PROPRIETARY
N
ARE THE
PROPRIETARY
AND AND
ETARY
AND
AL
INFORMATION
OF INC.
CREE,
INC.PLOT
THIS PLOT
ORMATION
CREE,
THIS
E, INC.
THISOF
PLOT
COPIED,
REPRODUCED
OR DISCLOSED
TO ANY
D,
REPRODUCED
OR
DISCLOSED
TO ANY
R
DISCLOSED
TO
ANY
High
Density
ZED
PERSON
THE
WITHOUT
WRITTEN
CONSENT
RSON
THE
WITHOUT
WRITTEN
CONSENT
CONSENT
4
1.60
2
REVISONS
All dimensions
in mm.
.38
Optical Reference
R.936
R.936
.38
.60
1.60
1.50
1.50
1.60
Top View
1.60
1.60
Side View
.30
3.30
1.60
1.60
1.60
4
4
.30
3.30
3.30
OPTICAL
REFERENCE
1.60
3
2
1
REVISONS
REVISONS
REV DESCRIPTION DESCRIPTION
BY DAT
B ANODE NOTE
ADDED
ANODE
AND8/6/
TEX
ADDED
AND
TEXT NOTEDC
2
REV
B
.30
Optical Reference
OPTICAL
REFERENCE
SOLDER PAD
REFERENCE
1.50
.60
PAD
SOLDER SOLDER
PAD
REFERENCE
REFERENCE
.60
Anode (+)
1.50
1.50
Optical
OPTICAL
REFERENCE
Reference
.80
±.10
Top View
ECOMMENDED
PC SOLDER
BOARD SOLDER
PAD
NDED
PAD
ER
PADPC BOARD
3.300
.30
Bottom View
3
1.50
.30
1.60
.60
Notch is onNOTCH IS O
cathode (-)CATHODE(side
1.50
.30
1.50
.65
.60
.44
.44
.44
OPTICAL
REFERENCE
.60
.60
.60
R.936
Optical
Reference
OPTICAL
REFERENCE
REFERENCE
OPTICAL REFERENCE OPTICAL
1.60
.65
2
1.60
REFERENCE
REFERENCE
.38
OPTICAL REFERENCE OPTICALOPTICAL
1.60
2
1
RE
REV
REV
REV
BYDE
Measurement tolerances unless indicatedDESCRIPTION
otherwise: ±.13 mmDESCRIPT
A
Init
A Release
Initial DDS
Relea
A
Initial
B
UPDATED
B
UPDATED
OVERALL
DOVER
CCO
B
UPDATED OVERALL
COMPONENT
HEIGHT
C REF. ADDED OPTICA
ADDED
DC
C
ADDEDCOPTICAL
1
D XQE/XQA
CHANGED
HEIGHT
CHANGED
HEIGHT
TODC
BLEN
D CHANGED HEIGHTDTO BLEND
TOGETHE
XQ-E High Density
1.60
3
3
3
XQEAWT-0x-xxxx-xxxxxxxxx
6
5
6
5
NOTICE
NOTICE High
Intensity
1.50
1.50
CREE
CONFIDENTIAL.
THIS
PLOT
AND
THE
INFORMATION
ENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED
WITHIN
ARE THE PROPRIETARY
AND
WITHIN
ARE THE
PROPRIETARY
AND
CONFIDENTIAL
INFORMATION
CREE,
INC. THIS PLOT
AL
INFORMATION
OF CREE, INC.OF
THIS
PLOT
XQEAWT-Hx-xxxx-xxxxxxxxx
MAY NOT
BE COPIED, REPRODUCED
ORTO
DISCLOSED
TO ANY
COPIED,
REPRODUCED
OR DISCLOSED
ANY
UNAUTHORIZED
PERSON
THE
WITHOUT
WRITTEN CONSENT
ED PERSON
THE
WITHOUT
WRITTEN
CONSENT
OF CREE INC.
XQ-E.30
High Intensity
.30
60
4
.80
±.10
.30
ALL
DIMENSIONS
±NOTED
.13MM UNLES
DIMENSIONS
ARE
± ARE
.13MM
UNLESS
OTHER
ALL DIMENSIONS ARE ALL
± .13MM
UNLESS
OTHERWIDE
Bottom View
DAT
DRAWN
DATE BY
DRAWN
BY
DATEOTHERWISE
DRAWN
BY
SPECIFIED
UNLESS UNLESS
OTHERWISE
SPECIFIED
UNLESS OTHERWISE SPECIFIED
46
Seibel 7/19
Seibel
Seibel DIMENSIONS
7/19/13
ARE
IN D.7/19/13
ARE IN D.
DIMENSIONS ARE IN D.DIMENSIONS
Du
CHECK
CHECK
DATE
CHECK
DATE
MILLIMETERS
AND
AFTER
FINISH. DAT
MILLIMETERS
AND AFTER
FINISH.
MILLIMETERS AND AFTER
FINISH.
Ph
.
UNLESS
-- ---Fa
-- SPECIFIED:
TOLERANCE
UNLESS
SPECIFIED:
TOLERANCE UNLESS SPECIFIED:
-- TOLERANCE
-.XX ± .25
.XX ±DATE
.25
.XX ± .25
APPROVED
DATE DAT
APPROVED
APPROVED
RECOMMENDED
TRACE LAYOUT
RECOMMENDED
RECOMMENDED TRACE
LAYOUT
1.500TRACE LAYOUT
1.500
.XXXTITLE
± .125
.XXX±7/19/13
.125
.XXX± .125
Nevins TITL
7/19
J. Nevins
X° ± .5°J. NevinsJ. 7/19/13
X° ± .5°
XTHIRD
° ± .5°
PROJECTION
THIRD
PROJECTION
THIRD
ANGLE
PROJECTION
® ANGLE
®ANGLE
XQE_XQA
MATERIAL
MATERIAL
MATERIAL
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document
is
subject
to
change
without
notice.
Cree
and
XLamp
are
registered
trademarks
and
the
Cree
logo
is
a
trademark
ofOUTLINE
FOR
SHEET
METAL
PARTS
ONLY
FOR
SHEET
METAL
PARTS
ONLY
FOR
SHEET
METAL
PARTS
ONLY
.300
.300
®
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
.X ±SIZE
1.5
.X ± 1.5
.X ± 1.5
DRAWING
NO.
-- SIZE
--- ± .75
.XX ± .75
.XX
.XX ± .75
.XXX±FINISH
.25
.XXX± .25
.XXX± .25
FINAL
PROTECTI
FINAL
PROTECTIVE
FINIS
FINAL PROTECTIVE
2610-00035
C
26
X° ± C
.5°
X° ± .5°
X° ± .5°
SCAL
SCALE
SH
1.6
1.6
1.6
SURFACE
FINISH:
--45
SURFACE
FINISH:
SURFACE FINISH:
-45.000
.65
.65
3.300
3.300
Side View
.30
1.60
1.60
XLamp ® XQ-E LED
C
.44
.44
C
OPTICAL REFERENCE
OPTICAL REFERENCE
1.60
1.60
Mechanical Dimensions - Continued
High Density & High Intensity
1.50
1.50
.30
.30
.65
.65
B
Solder
pad
SOLDER
PAD
SOLDER PAD
reference
REFERENCE
REFERENCE
.30
.30
B
3.30
3.30
1.60
1.60
1.60
1.60
Recommended PCB solder pad
A
ALL D
ALL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED PC BOARD SOLDER PAD
3.300
3.300
A
UNL
UD
MILL
M
TOL
T
Recommended trace layout
RECOMMENDED TRACE LAYOUT
RECOMMENDED TRACE LAYOUT
6
6
5
5
4
4
THIRD ANGLE PROJECTI
FOR
THIRD ANGLE PROJEC
F
3
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
3
SUS
5
4
3
2
1
REVISONS
E INFORMATION
RY AND
NC. THIS PLOT
DISCLOSED TO ANY
WRITTEN CONSENT
REV
BY
DESCRIPTION
DATE
APP'D
XLamp ® XQ-E LED
Tape and Reel
D
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm [in].
Measurement tolerances unless indicated otherwise: .xx = ±.10 mm
High Density
XQEAWT-0x-xxxx-xxxxxxxxx
XQ-E High Density
C
1.500
+.10
-.00
4.000
CATHODE SIDE
1.750
A
1.65
8.000
NOMINAL
8.30
MAX
1.85
1.000
2.000
A
3.50 ±.10
.30 ± .10
ANODE SIDE
B
POCKET SIZE
High Intensity
XQEAWT-Hx-xxxx-xxxxxxxxx
Ao -
1.85mm [.073"]
Bo -
1.85mm [.073"]
Ko -
1.20mm [.047"]
XQ-E High Intensity
4.00 [.157]
Po
1.50
CATHODE SIDE
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
3.50 [.138]F
0.2mm
5
4
3
4.00 [.157]
P
2.00 [.079]
P2
D. CRONIN
8.00 [.315]
DATE
NOMINAL
TITLE
1.85
[.073]
Phone (919) 313-5300
Fax (919)
Bo313-5558
SIZE
SCALE
C
REV.
DRAWING NO.
2402-00023
SHEET
4.000
2
A
OF
1
.30 [.012]
T
+.10 +.0039
POCKET SIZE
Ao -
1.85mm [.073"]
Bo -
1.85mm [.073"]
Ko -
1.20mm [.047"]
-.00[.0591-.0000]Do
1.75 [.069]
E1
CATHODE SIDE
1.85 [.073]
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark
of
Bo
8.00
[.315]
®
°
3.0
Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
NOMINAL
3.50 [.138]F
6.25
[.246]
8.30 [.327]
MAX
W
A
Carrier Tape, 1.7X1.7 XPQ
1.20 [.047]
Ko
1.50
3.0 °
APPROVED
MATERIAL
E2
1.6
4600 Silicon Drive
Durham, N.C 27703
5/31/12
DATE
ANODE SIDE
1.98 [.078]
1.85 [.073]
Ao
DATE
DRAWN BY
CHECK
FOR SHEET METAL PARTS ONLY
8.30 [.327]
.X
±
1.5
6.25
.XX ±
.75
MAX
.XXX ±
.25 [.246] FINAL PROTECTIVE FINISH
W
X°
±
.5 °
1.00
SURFACE FINISH:
[.039]
D1
3.0 °
4.00 [.157]
Po
-.00[.0591-.0000]Do
REFERENCE VENDOR PART NUMBER 021142
1.75 [.069]
E1
2.00 [.079]
P2
mulative tolerance ±
+.10 +.0039
28
1 /1
XLamp ® XQ-E LED
Tape and Reel - Continued
High Density & High Intensity
User Feed Direction
END
START
Trailer
160 mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
Loaded Pockets
(XQ-E High Density - 2,000 Lamps
XQ-E High Intensity - 3,000 Lamps)
Leader
400 mm (min) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp ® XQ-E LED
Packaging
The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-E LEDs. XLamp XQ-E LEDs are shipped in tape loaded
on a reel. Each box contains only one reel in a moisture barrier bag.
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label with Cree Bin Code,
Quantity, Reel ID
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Packaged Reel
Patent Label
Label with Customer Order
Label
with Cree Order Code,
Code, Qty, Reel ID, PO #
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30