Cree® XLamp® CXB1304 LED Product Description features Table of Contents The XLamp® CXB1304 LED Array is the • 6‑mm optical source Characteristics.............................................2 most compact member of the second • Mechanical and optical design Operating Limits...........................................2 generation of the CXA family that consistent with other CXA13 LEDs delivers up to 30% higher efficacy and • Available in 70-, 80- and 90-minimum up to 20% higher lumens than the first generation in the same small LES. The higher performance second generation CXA LED Arrays are compatible with the first generation, providing a drop-in CRI options • Cree EasyWhite® 2-, 3‑ and 5-step binning • Forward voltage options: 9‑V class, 18‑V class & 36‑V class Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V....................................4 Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V..................................6 Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V..................................8 Relative Spectral Power Distribution....... 10 performance upgrade to existing CXA • 85 °C binning and characterization Electrical Characteristics.......................... 10 LED designs to shorten the luminaire • Extremely uniform color over viewing Relative Luminous Flux............................. 12 design cycle and improve time to angle Typical Spatial Distribution....................... 15 market. Available in 2‑step, 3‑step and • Top-side solder connections Performance Groups - Brightness........... 15 5‑step EasyWhite® bins, the CXB1304 • Thermocouple attach point Performance Groups - Chromaticity........ 16 LED delivers high lumen output and • NEMA SSL-3 2011 standard flux bins Cree EasyWhite® Bins Plotted on the high efficacy in a single, easy‑to‑use • RoHS- and REACh‑compliant 1931 CIE Color Space............................... 17 package that eliminates the need for • UL® recognized component Bin and Order Code Formats.................... 18 reflow soldering, enabling lighting (E349212) CLD-DS116 Rev 0E Product family data sheet Mechanical Dimensions........................... 18 manufacturers to rapidly address small Thermal Design......................................... 19 form factor lighting applications. Notes......................................................... 21 Packaging.................................................. 22 The CX Family LED Design Guide provides basic information on the requirements to use the CXB1304 LED www.cree.com/Xlamp successfully in luminaire designs. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® CXB1304 LED Characteristics Characteristics Unit Viewing angle (FWHM) Minimum Typical degrees ESD withstand voltage (HBM per Mil-Std-883D) Maximum 115 V 8000 DC forward current (9 V) mA 1000* DC forward current (18 V) mA 500* DC forward current (36 V) mA 250* Reverse current (9 V, 18V, 36 V) mA 0.1 Forward voltage (9 V, 400 mA, 85 °C) V 8.6 9.5 Forward voltage (18 V, 200 mA, 85 °C) V 17.3 19 Forward voltage (36 V, 100 mA, 85 °C) V 34.5 38 * Refer to the Operating Limits section. Operating Limits The maximum current rating of the CXB1304 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 18 for the location of the Tc measurement point. CXB1304-9V 1200 1000 If (mA) 800 9V 600 400 200 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® CXB1304 LED Operating Limits - Continued CXB1304-18V 600 500 If (mA) 400 18 V 300 200 100 0 0 25 50 75 100 125 150 Case Temperature (°C) CXB1304-36V 300 250 If (mA) 200 36 V 150 100 50 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® CXB1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 18). Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ Group Flux (lm) Flux (lm) @ 85 °C @ 25 °C** C4 475 525 D2 510 563 C2 440 486 2-Step Group Order Code 3-Step Group Order Code --- 5-Step Group 65E 6500 K 80 70 --- 65E 70 5000 K 80 90 70 4000 K 80 90 CXB1304-0000000C0BC465E CXB1304-0000000C0BD265E CXB1304-0000000C0HC265E C4 475 525 CXB1304-0000000C0HC465E C4 475 525 CXB1304-0000000C0BC457E D2 510 563 CXB1304-0000000C0BD257E C2 440 486 CXB1304-0000000C0HC257E C4 475 525 C4 475 525 --- 57E 5700 K 80 Order Code --- 57E --- 50E D2 510 563 C2 440 486 C4 475 525 B4 410 453 --- 50G 92 50G C2 440 486 C4 475 525 D2 510 563 C2 440 486 C4 475 525 B2 380 420 CXB1304-0000000C0HC250G CXB1304-0000000C0HC450G 50E 40H 92 40H B4 410 453 CXB1304-0000000C0HC440H CXB1304-0000000C0UB240H CXB1304-0000000C0UB440H 40G 40G CXB1304-0000000C0BD250E CXB1304-0000000C0HC250E CXB1304-0000000C0HC450E CXB1304-0000000C0UC250G 40E --- CXB1304-0000000C0BC450E CXB1304-0000000C0UB450G --- CXB1304-0000000C0HC240H CXB1304-0000000C0HC457E CXB1304-0000000C0BC440E CXB1304-0000000C0BD240E CXB1304-0000000C0HC240G CXB1304-0000000C0HC440G CXB1304-0000000C0UB240G CXB1304-0000000C0UB440G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). • Cree XLamp CXB1304 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® CXB1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V (If = 400 mA, TJ = 85 °C) - cONTINUED Nominal CCT CRI* Minimum Luminous Flux Min Typ 80 --- Group B4 Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 410 2-Step Group 453 35H 80 440 486 CXB1304-0000000C0HC235H A4 355 392 CXB1304-0000000C0UA435H B2 380 420 CXB1304-0000000C0UB235H B4 410 453 CXB1304-0000000C0HB430H C2 440 486 A4 355 392 92 35H --- 30H 3000 K 90 80 92 30H CXB1304-0000000C0HC230H CXB1304-0000000C0UA430H B2 380 420 CXB1304-0000000C0UB230H B4 410 453 CXB1304-0000000C0HB427H C2 440 486 A2 330 364 --- 27H 2700 K 90 CXB1304-0000000C0HB435H C2 3500 K 90 Order Code 92 27H A4 355 392 CXB1304-0000000C0HC227H CXB1304-0000000C0UA227H CXB1304-0000000C0UA427H 3-Step Group 35G 35G 30G 30G 27G 27G Order Code 5-Step Group Order Code CXB1304-0000000C0HB435G CXB1304-0000000C0HC235G CXB1304-0000000C0UA435G CXB1304-0000000C0UB235G CXB1304-0000000C0HB430G CXB1304-0000000C0HC230G CXB1304-0000000C0UA430G CXB1304-0000000C0UB230G CXB1304-0000000C0HB427G CXB1304-0000000C0HC227G CXB1304-0000000C0UA227G CXB1304-0000000C0UA427G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). • Cree XLamp CXB1304 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® CXB1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 18). Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ Group Flux (lm) Flux (lm) @ 85 °C @ 25 °C** C4 475 525 D2 510 563 C2 440 486 2-Step Group Order Code 3-Step Group Order Code --- 5-Step Group 65E 6500 K 80 70 --- 65E 70 5000 K 80 90 70 4000 K 80 90 CXB1304-0000000F0BC465E CXB1304-0000000F0BD265E CXB1304-0000000F0HC265E C4 475 525 CXB1304-0000000F0HC465E C4 475 525 CXB1304-0000000F0BC457E D2 510 563 CXB1304-0000000F0BD257E C2 440 486 CXB1304-0000000F0HC257E C4 475 525 C4 475 525 --- 57E 5700 K 80 Order Code --- 57E --- 50E D2 510 563 C2 440 486 C4 475 525 B4 410 453 --- 50G 92 50G C2 440 486 C4 475 525 D2 510 563 C2 440 486 C4 475 525 B2 380 420 CXB1304-0000000F0HC250G CXB1304-0000000F0HC450G 50E 40H 92 40H B4 410 453 CXB1304-0000000F0HC440H CXB1304-0000000F0UB240H CXB1304-0000000F0UB440H 40G 40G CXB1304-0000000F0BD250E CXB1304-0000000F0HC250E CXB1304-0000000F0HC450E CXB1304-0000000F0UC250G 40E --- CXB1304-0000000F0BC450E CXB1304-0000000F0UB450G --- CXB1304-0000000F0HC240H CXB1304-0000000F0HC457E CXB1304-0000000F0BC440E CXB1304-0000000F0BD240E CXB1304-0000000F0HC240G CXB1304-0000000F0HC440G CXB1304-0000000F0UB240G CXB1304-0000000F0UB440G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). • Cree XLamp CXB1304 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® CXB1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 18 V (If = 200 mA, TJ = 85 °C) - cONTINUED Nominal CCT CRI* Minimum Luminous Flux Min Typ 80 --- Group B4 Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 410 2-Step Group 453 35H 80 440 486 CXB1304-0000000F0HC235H A4 355 392 CXB1304-0000000F0UA435H B2 380 420 CXB1304-0000000F0UB235H B4 410 453 CXB1304-0000000F0HB430H C2 440 486 A4 355 392 92 35H --- 30H 3000 K 90 80 92 30H CXB1304-0000000F0HC230H CXB1304-0000000F0UA430H B2 380 420 CXB1304-0000000F0UB230H B4 410 453 CXB1304-0000000F0HB427H C2 440 486 A2 330 364 --- 27H 2700 K 90 CXB1304-0000000F0HB435H C2 3500 K 90 Order Code 92 27H A4 355 392 CXB1304-0000000F0HC227H CXB1304-0000000F0UA227H CXB1304-0000000F0UA427H 3-Step Group 35G 35G 30G 30G 27G 27G Order Code 5-Step Group Order Code CXB1304-0000000F0HB435G CXB1304-0000000F0HC235G CXB1304-0000000F0UA435G CXB1304-0000000F0UB235G CXB1304-0000000F0HB430G CXB1304-0000000F0HC230G CXB1304-0000000F0UA430G CXB1304-0000000F0UB230G CXB1304-0000000F0HB427G CXB1304-0000000F0HC227G CXB1304-0000000F0UA227G CXB1304-0000000F0UA427G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). • Cree XLamp CXB1304 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® CXB1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) The following table provides order codes for XLamp CXB1304 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 18). Nominal CCT CRI* Min 70 Minimum Luminous Flux Typ Group Flux (lm) Flux (lm) @ 85 °C @ 25 °C** C4 475 525 D2 510 563 C2 440 486 2-Step Group Order Code 3-Step Group Order Code --- 5-Step Group 65E 6500 K 80 70 --- 65E 70 5000 K 80 90 70 4000 K 80 90 CXB1304-0000000N0BC465E CXB1304-0000000N0BD265E CXB1304-0000000N0HC265E C4 475 525 CXB1304-0000000N0HC465E C4 475 525 CXB1304-0000000N0BC457E D2 510 563 CXB1304-0000000N0BD257E C2 440 486 CXB1304-0000000N0HC257E C4 475 525 C4 475 525 --- 57E 5700 K 80 Order Code --- 57E --- 50E D2 510 563 C2 440 486 C4 475 525 B4 410 453 --- 50G 92 50G C2 440 486 C4 475 525 D2 510 563 C2 440 486 C4 475 525 B2 380 420 CXB1304-0000000N0HC250G CXB1304-0000000N0HC450G 50E 40H 92 40H B4 410 453 CXB1304-0000000N0HC440H CXB1304-0000000N0UB240H CXB1304-0000000N0UB440H 40G 40G CXB1304-0000000N0BD250E CXB1304-0000000N0HC250E CXB1304-0000000N0HC450E CXB1304-0000000N0UC250G 40E --- CXB1304-0000000N0BC450E CXB1304-0000000N0UB450G --- CXB1304-0000000N0HC240H CXB1304-0000000N0HC457E CXB1304-0000000N0BC440E CXB1304-0000000N0BD240E CXB1304-0000000N0HC240G CXB1304-0000000N0HC440G CXB1304-0000000N0UB240G CXB1304-0000000N0UB440G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). • Cree XLamp CXB1304 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® CXB1304 LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (If = 100 mA, TJ = 85 °C) - cONTINUED Nominal CCT CRI* Minimum Luminous Flux Min Typ 80 --- Group B4 Flux (lm) Flux (lm) @ 85 °C @ 25 °C** 410 2-Step Group 453 35H 80 440 486 CXB1304-0000000N0HC235H A4 355 392 CXB1304-0000000N0UA435H B2 380 420 CXB1304-0000000N0UB235H B4 410 453 CXB1304-0000000N0HB430H C2 440 486 A4 355 392 92 35H --- 30H 3000 K 90 80 92 30H CXB1304-0000000N0HC230H CXB1304-0000000N0UA430H B2 380 420 CXB1304-0000000N0UB230H B4 410 453 CXB1304-0000000N0HB427H C2 440 486 A2 330 364 --- 27H 2700 K 90 CXB1304-0000000N0HB435H C2 3500 K 90 Order Code 92 27H A4 355 392 CXB1304-0000000N0HC227H CXB1304-0000000N0UA227H CXB1304-0000000N0UA427H 3-Step Group 35G 35G 30G 30G 27G 27G Order Code 5-Step Group Order Code CXB1304-0000000N0HB435G CXB1304-0000000N0HC235G CXB1304-0000000N0UA435G CXB1304-0000000N0UB235G CXB1304-0000000N0HB430G CXB1304-0000000N0HC230G CXB1304-0000000N0UA430G CXB1304-0000000N0UB230G CXB1304-0000000N0HB427G CXB1304-0000000N0HC227G CXB1304-0000000N0UA227G CXB1304-0000000N0UA427G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 21). • Cree XLamp CXB1304 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * For 80 CRI minimum LEDs, CRI R9 minimum is 0 with a ±2 tolerance. For 90 CRI minimum LEDs, CRI R9 typical is 60. ** Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® CXB1304 LED Relative Spectral Power Distribution Relative Spectral Power Distribution The following graph is the result of a series of pulsed measurements at 400 mA for the 9-V CXB1304 LED, 200 mA for the 18-V CXB1304 LED and 100 mA for the 36-V CXB1304 LED and TJ = 85 °C. 100% Relative Spectral Power 90% 80% 70% 60% 5000 K, 70 CRI 50% 4000 K, 70 CRI 40% 3000 K, 80 CRI 30% 3000 K, 90 CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Electrical Characteristics The following graphs are the result of a series of steady-state measurements. 10.00 9.75 9V Voltage (V) 9.50 9.25 Tc = 25 °C 9.00 Tc = 55 °C Tc = 85 °C 8.75 Tc = 105 °C 8.50 8.25 8.00 200 300 400 500 600 700 800 900 1000 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® CXB1304 LED Electrical Characteristics - Continued 20.0 19.5 18 V Voltage (V) 19.0 18.5 Tc = 25 °C 18.0 Tc = 55 °C Tc = 85 °C 17.5 Tc = 105 °C 17.0 16.5 16.0 100 150 200 250 300 350 400 450 500 Current (mA) 40 39 36 V Voltage (V) 38 37 Tc = 25 °C 36 Tc = 55 °C Tc = 85 °C 35 Tc = 105 °C 34 33 32 50 75 100 125 150 175 200 225 250 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® CXB1304 LED Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXB1304 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 400 mA at TJ = 85 °C for the 9-V CXB1304 LED. Using the 9-V CXB1304 LED as an example, at steady-state operation of Tc = 55 °C, IF = 300 mA, the relative luminous flux ratio is 80% in the chart below. A 9-V CXB1304 LED that measures 380 lm during binning will deliver 304 lm (380 * 0.8) at steady-state operation of Tc = 55 °C, IF = 300 mA. 240% Relative Luminous Flux 200% 9V 160% Tc = 25 °C Tc = 55 °C 120% Tc = 85 °C Tc = 105 °C 80% 40% 0% 200 300 400 500 600 700 800 900 1000 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® CXB1304 LED Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXB1304 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 200 mA at TJ = 85 °C for the 18-V CXB1304 LED. Using the 18-V CXB1304 LED as an example, at steady-state operation of Tc = 55 °C, IF = 150 mA, the relative luminous flux ratio is 80% in the chart below. An 18-V CXB1304 LED that measures 380 lm during binning will deliver 304 lm (380 * 0.8) at steady-state operation of Tc = 55 °C, IF = 150 mA. 240% Relative Luminous Flux 200% 18 V 160% Tc = 25 °C Tc = 55 °C 120% Tc = 85 °C Tc = 105 °C 80% 40% 0% 100 150 200 250 300 350 400 450 500 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® CXB1304 LED Relative Luminous Flux - Continued The relative luminous flux values provided below are the ratio of: • Measurements of CXB1304 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 100 mA at TJ = 85 °C for the 36-V CXB1304 LED. Using the 36-V CXB1304 LED as an example, at steady-state operation of Tc = 55 °C, IF = 75 mA, the relative luminous flux ratio is 80% in the chart below. A 36-V CXB1304 LED that measures 380 lm during binning will deliver 304 lm (380 * 0.8) at steady-state operation of Tc = 55 °C, IF = 75 mA. 240% Relative Luminous Flux 200% 36 V 160% Tc = 25 °C Tc = 55 °C 120% Tc = 85 °C Tc = 105 °C 80% 40% 0% 50 75 100 125 150 175 200 225 250 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® CXB1304 LED Typical Spatial Distribution 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Performance Groups - Brightness (9 V, If = 400 ma; 18 V, If = 200 mA; 36 V, If = 100 mA, Tj = 85 °C) XLamp CXB1304 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux A2 330 355 A4 355 380 B2 380 410 B4 410 440 C2 440 475 C4 475 510 D2 510 550 D4 550 590 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® CXB1304 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXB1304 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 EasyWhite Color Temperatures – 3-Step Ellipse Center Point Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 54.0 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis y a b Rotation Angle (°) Bin Code CCT 50G 40G EasyWhite Color Temperatures – 5-Step Ellipse Bin Code CCT Center Point x 65E 6500 K 0.3123 0.3282 0.01110 0.00550 61.0 57E 5700 K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000 K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® CXB1304 LED Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space 0.44 2700 K ANSI C78.377 Quadrangle 0.43 3000 K EasyWhite 5-step EasyWhite 3-step 0.42 3500 K EasyWhite 2-step 0.41 4000 K 0.40 4500 K CCy 0.39 5000 K 0.38 0.37 5700 K 0.36 6500 K 0.35 0.34 0.33 0.32 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.31 CCx Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® CXB1304 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series = CXB13 Series = CXB13 Internal code Chromaticity bin CRI Specification B = 70 min CRI H = 80 min CRI 6 NOTICE U = 90 min CRI CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION 5 4 CONTAINED WITHIN ARE THE PROPRIETARY AND Internal code CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT SSSSSCC-HHHH-HHHGGRNNNNN MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT OF CREE INC. THE WRITTEN CONSENT SSSSSCC-WWW-FF-GGR-AAAAA Kit code CRI Specification B = 70 min CRI H = 80 min CRI U = 90 min CRI Vf class C0 = 9-V class F0 = 18-V class N0 = 36-V class D Vf class C0 = 9-V class F0 = 18-V class N0 = 36-V class Flux bin Performance class Performance class Mechanical Dimensions Dimensions are in mm. 13.35 ±0.2 Tolerances unless otherwise specified: +.13 C 2.60 x° +1° 1.22 2.86 1.15 ± .15 Tc 1.22 2.60 4.19 R.500 13.35 ±0.2 6.0 ± 0.2 B 2.60 7.5 ±0.2 1.22 2.60 1.22 0.55 ± 0.1 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 18 3 XLamp ® CXB1304 LED Thermal Design The CXB family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXB LED is being operated within its designed limits. Please refer to page 2 for the Operating Limit specification. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from solder point (TSP), to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXB soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information on the requirements to use Cree XLamp CXB LEDs successfully in luminaire designs. To keep the CXB1304 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value shown on the following graphs, depending on the operating environment. The y‑axis in each graph is a base 10 logarithmic scale. As the figure at right shows, the R_c-a value is the sum of the thermal resistance of the TIM (R_tim) R_j-c R_j-c Tc Tc R_tim R_c-a plus the thermal resistance of the heat sink (R_hs). R_hs CXB1304-9V Ta Ta 100.00 9V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 200 300 400 500 600 700 800 900 1000 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 19 XLamp ® CXB1304 LED CXB1304-18V Thermal Design - Continued 100.00 18 V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 100 150 200 250 300 350 400 450 500 Current (mA) CXB1304-36V 100.00 36 V Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 50 75 100 125 150 175 200 225 250 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 20 XLamp ® CXB1304 LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 21 XLamp ® CXB1304 LED Packaging Cree CXB1304 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. Dimensions are in inches. Tolerances: +.13 REV 5 5.875 NSENT 5.875 DESC. 4 6 5 BY REV CHK. DESC. DATE x° +1° 3 R.375 NOTICE ENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND L INFORMATION OF CREE, INC. THIS PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY ED PERSON WITHOUT THE WRITTEN CONSENT DATE BY CHK. 2 1 R.375 4 .562 3 .562 2 1 5.875 R .375 .875 .875 5.875 R .375 5.875 .875 .875 5.875 .38 .875 .58 PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON SECTION C-C ITH CREE BIN ANTITY, LOT # EL IS LOCATED IDE OF COVER THIS DRAWING CONTAINS PROPRIETARY DESIGN INFORMATION AND REMAINS ALONG WITH THE PRODUCT OR PRODUCTS REPRESENTED HEREIN THE PROPERTY OF TEK PAK, INCORPORATED. THIS DOCUMENT AND THE INFORMATION IT CONTAINS DWG.TITLE MAY NOT BE COPIED, TRANSMITTED, OR USED BY ANY THIRD PARTY WITHOUT THE EXPRESS WRITTEN APPROVAL OF TEK PAK, INCORPORATED. SECTION C-C LABEL WITH CREE BIN .875 CODE, QUANTITY, LOT DO# NOT SCALE DWG. .38 .875 .38 UNLESS OTHERWISE NOTED ALL .38 THIS DRAWING CONTAINS PROPRIETARY DESIGN INFORMATION AND REMAINS ALONG WITH THE PRODUCT OR PRODUCTS REPRESENTED HEREIN THE PROPERTY OF TEK PAK, INCORPORATED. THIS DOCUMENT AND THE INFORMATION IT CONTAINS DWG.TITLE MAY NOT BE COPIED, TRANSMITTED, OR USED BY ANY THIRD PARTY WITHOUT THE EXPRESS WRITTEN APPROVAL BAG OF TEK PAK, INCORPORATED. PART DRAWING BAG DATE: NOTED ALL SCALE: 1.000 4-3-13 UNLESS SIZE OTHERWISE DWG. NO. TOLERANCES ARE AS FOLLOWS: ±1/64 X.X" ±.030 X.0mm ±.75mm KJS FRACT ANGLES ±0°-30' X.XX" ±.015 X.Xmm ±.30mm DO NOT DR. BY: SCALE DWG. CHK. BY: TOLERANCES ARE AS FOLLOWS: FRACT ±1/64 X.X" ±.030 X.0mm ±.75mm ANGLES ±0°-30' X.XX" ±.015 X.Xmm ±.30mm DRAFT ±1° X.XXX" ±.005 X.XXmm ±.10mm B DRAFT ±1° PATENT LABEL IS LOCATED ON UNDERSIDE OF COVER 022490-00 X.XXX" ±.005 X.XXmm ±.10mm SHEET 2 OF 2 PART DRAWING DATE: DR. BY: CHK. BY: 4-3-13 KJS SIZE B SCALE: 1.000 DWG. NO. 022490-00 SHEET 2 OF 2 LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # LABEL WITH CREE BIN CODE, QUANTITY, LOT # UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QUANTITY, LOT # Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without trademark of Cree, Inc.. UL® and the UR logo are registered trademarks of UL LLC. 6 5 4 THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS AREFOR IN SHEET METAL PARTS ONLY CHECK MILLIMETERS & BEFORE FINISH. .X ± .06 ® ® ® notice. Cree , XLamp TOLERANCE UNLESS SPECIFIED:and .XXEasyWhite ± .03 .X ± .XX ± 3 .XXX ± X° ± 0.1 .05 .005 1 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XXX ±APPROVED .010 X° ± 2 ° DATE DATE APPROVED DATE 4600 Silicon Drive Durham, N.C 277 Phone (919) 361- Fax (919) 313-530 .X ± 0.1 .XX ± .05 .XXX ±DRAWN .005BY X° ± 1 ° THIRD ANGLE PROJECTION L WITH CREE BIN QUANTITY, LOT # DRAWN BY CHECK TITLE CXA15XX_DATASHEET DATE MATERIAL DATE SIZE DATE SCALE C DRAWING NO. 4600 Silicon Drive Durham, N.C 27703 Phone (919) 361-4770 CXA15XX_DATASHEET_BAG2013 PROTECTIVE FINISH trademarks and the Cree are FINAL registered logo is a Fax (919) 313-5303 TITLE MATERIAL SIZE FINAL PROTECTIVE FINISH 0.500 SHEET CXA15XX_DATASHEET 22 2 1 DRAWING NO. CXA15XX_DATASHEET_BAG2013 OF