CLD-CT995.002 PRODUCT FAMILY DATA SHEET Cree® PLCC4 1-in-1 SMD LED CLM4B-BKW/GKW PRODUCT DESCRIPTION FEATURES APPLICATIONS SMD LEDs is packaged in the industry • Size (mm):3.2 x 2.7 • Light Strip standard package. These LEDs have • Color and Typical Dominant Wavelength: Blue (470nm) Green (527nm) • Channel Letter high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under architectural lighting application conditions. • Architectural Lighting • Luminous Intensity (mcd) CLM4B-BKW:(355 - 900) CLM4B-GKW:(1400 - 3550) • Lead-Free • RoHS Compliant Its wide viewing angle makes these LEDs ideally suited for channel letter, or architectural lighting applications. The flat top emitting surface makes it easy for these LEDs to mate with WWW.CREE.COM/HB light pipes. Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Blue/Green Forward Current IF 30 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 126 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 350 °C/W Junction/Solder Point RTHJS 200 °C/W Peak Forward Current Note Note: Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Forward Voltage Blue/Green VF IF = 30 mA V Reverse Current Blue/Green IR VR = 5 V μA Blue λD IF = 30 mA nm 460 470 480 Green λD IF = 30 mA nm 515 527 535 Blue IV IF = 30 mA mcd 355 550 Green IV IF = 30 mA mcd 1400 1800 Dominant Wavelength Luminous Intensity Unit Minimum Typical Maximum 3.6 4.2 10 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW INTENSITY BIN LIMIT (IF = 30 mA) Blue (CLM4B-BKW) Green (CLM4B-GKW) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Tb 355 450 Wb 1400 1800 Ua 450 560 Xa 1800 2240 Ub 560 710 Xb 2240 2800 Va 710 900 Ya 2800 3550 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 30 mA) Blue (CLM4B-BKW) Green (CLM4B-GKW) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) B3 460 465 G6 515 520 B4 465 470 G7 520 525 B5 470 475 G8 525 530 B6 475 480 G9 530 535 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW ORDER CODE TABLE* Luminous Intensity (mcd) Dominant Wavelength Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Blue CLM4B-BKW-CTbVa363 355 900 B3 460 B6 480 Blue CLM4B-BKW-CUaVa453 450 900 B4 465 B5 475 Color Kit Number Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Green CLM4B-GKW-CWbYa693 1400 3550 G6 515 G9 535 Green CLM4B-GKW-CXaYa793 1800 3550 G7 520 G9 535 Luminous Intensity (mcd) Dominant Wavelength Notes: 1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW GRAPHS (RELATIVE LUMINOUS INTENSITY) 5.0 IF (mA) 100.0 4.0 80.0 Blue 60.0 3.0 Green 40.0 2.0 20.0 1.0 Blue Green 0.0 VF(V) 3.0 3.4 3.8 4.6 4.2 5.0 -50 -40 -30 -20 -10 20 60 40 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vr(V) 0.0 0 0 0 (RELATIVE LUMINOUS INTENSITY) 100% -10 80% -20 60% -30 40% -40 20% Blue -50 Ir(uA) FIG.3 BLUE & GREEN REVERSE CURRENT VS. REVERSE VOLTAGE. 0% 300 Green 400 500 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. (RELATIVE LUMINOUS INTENSITY) IF(mA) 1.0 50 40 Rth j-s=200 C/W 30 0.5 20 Rth j-a=350 C/W 10 0 0 20 40 60 80 Ta( C) 100 FIG.5 BLUE&GREEN MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 -90 Angle -60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 1 in 1 SMD LED CLM4B-BKW/GKW PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. 防潮珠。不可食 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8