Cree® PLCC4 3 in 1 RGB SMD LED CLMVC-FKA PRODUCT DESCRIPTION FEATURES APPLICATIONS The CLMVC-FKA full-color RGB LED • Size (mm):2.0x 2.0 • Full-Color Video Screen offers a high-intensity light output and a • Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (460 - 475nm) • Decorative lighting wide viewing angle. The compact 2mm x 2mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. Cree PLCC full-color RGB LEDs are suited for indoor video screen, decorative lighting applications. and amusement • Amusement • Luminous Intensity (mcd) Red (56 - 112)@ 5mA Green (140 - 355)@ 5mA Blue (28 - 71)@ 5mA • Lead-Free • RoHS Compliant WWW.CREE.COM/HB • Matte Surface Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp CLD-CT1273.010 PRODUCT FAMILY DATA SHEET Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 25 13 13 mA IFP 70 50 50 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 60 49 49 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 350 490 430 °C/W Junction/solder point 1 chip on RTHJS 240 480 380 °C/W Forward Current Note 1 Peak Forward Current Note 2 Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 5mA λDOM Spectral bandwidth at 50% IREL max IF = 5mA G B 619~624 520~535 460~475 nm Δλ 24 38 28 nm 1.9 2.9 3.0 V VF(max) 2.4 3.7 3.7 V IV(min) 56 140 28 mcd IV(avg) 80 225 43 mcd IF = 20/10/10 mA IV(avg) 310 340 69 mcd VR = 5 V IR 10 10 10 μA IF = 5mA Luminous Intensity IF = 5mA Reverse Current (max) Unit R VF(avg) Forward Voltage Luminous Intensity(Reference) Values Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA INTENSITY BIN LIMIT (IF = 5 mA) Min.(mcd) Max.(mcd) 180 L7 28 36 202 3j3h 32 41 36 45 Min.(mcd) Max.(mcd) 71 D 140 81 9a 160 Min.(mcd) Max.(mcd) L 56 64 Bin Code Bin Code Bin Code 3c3b Blue Green Red A 71 90 E 180 224 L8 3a4 81 101 bc 202 252 3g3f 41 51 112 F 224 280 L9 45 56 51 64 56 71 B 90 de 252 318 3e3d G 280 355 L Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (IF = 5 mA) Red Green Bin Code Min.(nm) Max.(nm) RB 619 624 Bin Code Min.(nm) Blue Max.(nm) Bin Code Min.(nm) Max.(nm) G7 520 525 B3 460 465 G23 522.5 527.5 B23 462.5 467.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number Color CLMVC-FKA-CLBDGL7LBB79353 CLMVC-FKA-CL1D1L71BB7C3C3 CLMVC-FKA-CA1E1L81BB7C3C3 Color Bin Max. (nm) Package 619 RB 624 Reel 520 G9 535 Reel 460 B5 475 Reel 619 RB 624 Reel Color Bin Min. (nm) 112 RB 355 G7 B3 RB Min. Max. Red 56 Green 140 28 71 Blue Dominant Wavelength (nm) Red Any 1 Intensity bin from L(56) - B(112) Green Any 1 Intensity bin from D(140) - G(355) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from L7(28) - L(71) Any 1 hue bin from B3(460) - B5(475) Reel Red Any 1 Intensity bin from A(71) - B(112) Green Any 1 Intensity bin from E(180) - G(355) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from L8(36) - L(71) Any 1 hue bin from B3(460) - B5(475) Reel RB 619 RB 624 Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from L - B means only 1 intensity-bin (L or 3c3b or A or 3a4 or B) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - G9 means only 1 color-bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA GRAPHS ℃ ℃ The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA REFLOW SOLDERING • • • • The CLMVC-FKA is rated as a MSL 5a product. After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the SMD LEDs must be used (subject to reflow) within 24 hours after bag opening, and baking 24-hour/80ºC is required when exceeding 24 hours. Note that baking must only be done once. The temperature profile is as below. Document No.: COTCO-05-0057 Rev. NO.: 13 Temperature Melting-point Pre-heat Soak Cooling Reflow Time Use all SMD besides LP6-NPP1-01-N1 Use only with CLMVC-FKA Solder = Sn63-Pb37 Soldering pad: Solder = Lead-free Average ramp-up rate =4ºC/s max Preheattemperature = 100ºC ~150ºC Preheattemperature = 150ºC ~200ºC Preheattime = 100s max. Preheattime = 100s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max max. Peaktemperature 230ºC Peak temperature = 235ºC=max Ramp-down rate =6ºC/s max. max. Time Time within within5ºC 5ºC of actualofPeak Temperature = 10s max actual Peak Temperature Duration above 217ºC 45s max Duration aboveis183ºC is 80s Only use LP6-NPP1-01-N1 Peaktemperature = 250ºC max. = 10s max. max. Ramp-down rate =6ºC/s Ramp-down rate = 6ºC/s max Solder Average ramp-up rate =4ºC/s max. Time within5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 80s max. [13] Solder = Low Lead-free Average ramp-up rate =3ºC/s max. Preheattemperature = 130ºC ~170ºC Preheattime = 120s max. Ramp-down rate =6ºC/s max. Peaktemperature = 213ºC max. Time within3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad designfor heat dissipation (2-pin SMD LED): Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7.0 9 Cree PLCC4 3 in 1 SMD RGB LED CLMVC-FKA PACKAGING • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 12800 pcs per reel. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10