CLD-CT1143.001 PRODUCT FAMILY DATA SHEET Cree® P4 LED CP41B-RDS/ADS CP41B-RFS/AFS CP41B-RHS/AHS PRODUCT DESCRIPTION FEATURES APPLICATIONS This revolutionary package design • Size (mm): 7.6 x 7.6 • Channel Letter • Color and Typical Dominant Wavelength: Red (628nm) Amber(591nm) • Amusement • Luminous Flux (mlm) CP41B-RDS: (4400-11000) CP41B-RFS: (4400-11000) CP41B-RHS: (4400-13200) CP41B-ADS: (4400-11000) CP41B-AFS: (5500-13200) CP41B-AHS: (5500-13200) • Lead - Free • RoHS Compliant allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical-package design and highcurrent capabilities. The low-profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs green and blue LED materials, which allows designers to match the color of many lighting applications such as vehicle signal WWW.CREE.COM/HB lamps and amusement lighting. Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current Peak Forward Current IF 70 mA Note1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 210 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) ESD Class 2 Note2 Electrostatic Discharge Classification (MIL-STD-883E) Note: 1.A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Unit Minimum Typical Maximum 2.5 3.0 Forward Voltage Red/Amber VF IF = 70 mA V Reverse Current Red/Amber IR VR = 5 V μA Red λD IF = 70 mA nm 620 628 637 Amber λD IF = 70 mA nm 584 591 599 CP41B-RDS (40 degree) Φv IF = 70 mA mlm 4400 7000 Dominant Wavelength Red Luminous Flux Amber 50% Power Angle 100 CP41B-RFS (70 degree) Φv IF = 70 mA mlm 4400 7500 CP41B-RHS (100 degree) Φv IF = 70 mA mlm 4400 8000 CP41B-ADS (40 degree) Φv IF = 70 mA mlm 4400 6500 CP41B-AFS (70 degree) Φv IF = 70 mA mlm 5500 7500 CP41B-AHS (100 degree) Φv IF = 70 mA mlm 5500 8000 CP41B-RDS/ADS 2θ½ IF = 70 mA deg CP41B-RFS/AFS 2θ½ IF = 70 mA deg 70 CP41B-RHS/AHS 2θ½ IF = 70 mA deg 100 40 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS FLUX BIN LIMIT (IF = 70 mA) Red Amber CP41B-RDS/RFS (40/70 degree) CP41B-ADS (40 degree) Bin Code Min.(mlm) Max.(mlm) Bin Code Min.(mlm) Max.(mlm) L0 4400 5500 L0 4400 5500 M0 5500 6600 M0 5500 6600 N0 6600 8730 N0 6600 8730 P0 8730 11000 P0 8730 11000 CP41B-RHS (100 degree) CP41B-AFS/AHS (70/100 degree) Bin Code Min.(mlm) Max.(mlm) Bin Code Min.(mlm) Max.(mlm) L0 4400 5500 M0 5500 6600 M0 5500 6600 N0 6600 8730 N0 6600 8730 P0 8730 11000 P0 8730 11000 Q0 11000 13200 Q0 11000 13200 • Tolerance of measurement of luminous flux is ±15% COLOR BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RE 620 637 A2 584 587 A3 587 590 A4 590 593 A5 593 596 A6 596 599 • Tolerance of measurement of dominant wavelength is ±1 nm VF BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(V) Max.(V) Bin Code Min.(V) Max.(V) 23 2.0 2.2 23 2.0 2.2 24 2.2 2.4 24 2.2 2.4 25 2.4 2.6 25 2.4 2.6 26 2.6 2.8 26 2.6 2.8 27 2.8 3.0 27 2.8 3.0 • Tolerance of measurement of VF is ±0.05V. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS ORDER CODE TABLE* Color Kit Number Viewing Angle Red CP41B-RDS-CL0P0EE4 Red Color Luminous Flux (mlm) Dominant Wavelength Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 40 4400 11000 RE 620 RE 637 CP41B-RDS-CM0P0EE4 40 5500 11000 RE 620 RE 637 Kit Number Viewing Angle Min. Red CP41B-RFS-CL0P0EE4 70 Red CP41B-RFS-CM0P0EE4 70 Red CP41B-RFS-CN0P0EE4 70 Color Kit Number Viewing Angle Min. Red CP41B-RHS-CL0Q0EE4 100 Red CP41B-RHS-CM0Q0EE4 100 Red CP41B-RHS-CN0Q0EE4 100 Color Kit Number Viewing Angle Amber CP41B-ADS-CL0P0264 Amber CP41B-ADS-CM0P0354 Amber Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 4400 11000 RE 620 RE 637 5500 11000 RE 620 RE 637 6600 11000 RE 620 RE 637 Luminous Flux (mlm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 4400 13200 RE 620 RE 637 5500 13200 RE 620 RE 637 6600 13200 RE 620 RE 637 Luminous Flux (mlm) Dominant Wavelength Min. Max. Color Bin 40 4400 11000 A2 584 A6 599 40 5500 11000 A3 587 A5 596 CP41B-ADS-CM0P0454 40 5500 11000 A4 590 A5 596 Color Kit Number Viewing Angle Min. Amber CP41B-AFS-CM0Q0264 70 Amber CP41B-AFS-CN0Q0354 Amber CP41B-AFS-CN0Q0454 Color Kit Number Viewing Angle Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) Amber CP41B-AHS-CM0Q0264 100 5500 13200 A2 584 A6 599 Amber CP41B-AHS-CN0Q0354 100 6600 13200 A3 587 A5 596 Amber CP41B-AHS-CN0Q0454 100 6600 13200 A4 590 A5 596 Luminous Flux (mlm) Min. (nm) Color Bin Max. (nm) Dominant Wavelength Max. Color Bin Min. (nm) Color Bin Max. (nm) 5500 13200 A2 584 A6 599 70 6600 13200 A3 587 A5 596 70 6600 13200 A4 590 A5 596 Luminous Flux (mlm) Dominant Wavelength Notes: 1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes. Only one flux-bin code and one color-bin code will be shipped on each reel. And single flux-bin code,single color bin-codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. CP41B-RDS/ADS: CP41B-RFS/AFS: NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. CP41B-RHS/AHS: NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS KIT NUMBER SYSTEM All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 9 Cree P4 LED CP41B-RDS/ADS CP41B-RFS/RFS CP41B-RHS/AHS PACKAGING Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube. R xxx xxx R C OL OR LED LAMP T YPE LXXXXXXXX-XXX LOT J OWAXXXXX -XX-XXX QT Y RANK P CS Iv Vf Hu e X XX XX AX XXX XXX XXX X Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10